Search results: “ atmega328p”
Showing all 21 results
-
Microcontroller ICs
ATmega328P U-TH Microcontroller
SKU: 162200- High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
- Advanced RISC Architecture
- High Endurance Non-volatile Memory Segments
- Atmel® QTouch® library support
- Peripheral Features
- Special Microcontroller Features
SKU: 162200 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M (Official Version)
SKU: 11458- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 11458 -
Microcontroller ICs
ATmega328P-U PDIP-28 Microcontroller
SKU: 162204- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
SKU: 162204 -
Boards Compatible with Arduino
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
SKU: 28446- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: 28446 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
SKU: 31249- Microcontroller: ATmega328
- Circuit Operating Voltage: 3.3V
- Clock frequency: 8MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 31249 -
Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
SKU: 44497- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 44497 -
-
Boards Compatible with Arduino
Seeeduino V4.3 (ATMega328P) Development Board
SKU: 1691810- ATmega328P microcontroller
- Arduino UNO bootloader
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP Header
- Arduino UNO-R3 Shield Compatible
- Micro USB programming and power supply
- 3 on-board Grove connectors
- 3.3/5V system operation power switch
SKU: 1691810 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Black- Standard version
SKU: 498153- ATmega328 running at 16MHz with external resonator (0.5% tolerance).
- 100% Arduino compatible board.
- Max Output Current: 150mA.
- 0.8mm Thin PCB.
- USB connection off-board.
- Supports auto-reset.
- Onboard Power and Status LEDs.
SKU: 498153 -
Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board with Micro-USB
SKU: 1038553- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 1038553 -
-
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
SKU: 409791- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
SKU: 409791 -
-
Boards Compatible with Arduino
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
Boards Compatible with ArduinoUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
SKU: 48065- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 48065 -
-
Boards Compatible with Arduino
Unsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
Boards Compatible with ArduinoUnsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
SKU: 1150789- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
SKU: 1150789 -
Boards Compatible with Arduino
Cytron Uno Board ATmega328 Microcontroller (Arduino Compatible)
SKU: 766269- A better version of Arduino Uno
- SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader
- USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable)
- Input voltage: DC7-15V
- 14 Digital I/O Pins (6 PWM outputs)
SKU: 766269 -
AVR Microcontroller Board
MICROCHIP ATMEGA328PB-XMINI Evaluation Kit, Mini, ATmega328PB Xplained Mini, 8-Bit
AVR Microcontroller BoardMICROCHIP ATMEGA328PB-XMINI Evaluation Kit, Mini, ATmega328PB Xplained Mini, 8-Bit
SKU: 1417171- Product: ATMEGA328PB-XMINI Evaluation Kit, Mini, ATmega328PB Xplained Mini, 8-Bit
- Architecture: megaAVR
- Silicone Manufacturer: Atmel
- Silicon Family Name: ATmega
- No. of Bits: 8bit
SKU: 1417171 -
