Search results: “815779”
Showing 1–48 of 67 results
-
-
Raspberry Pi Case
Acrylic Case Suitable for Raspberry Pi4 and 3.5 inch LCD
SKU: 835779- This simple case provides tough protection for your raspberry pi along with 3.5 inch LCD screen
- High-Quality acrylic case
- Click together design, no screws, standoffs, or elastic bands required
- It is easy to use. You just need to click them together
SKU: 835779 -
3D Printer Display and Controller
2.4 inch Mini 3D Printer LCD Splash Screen MKS TFT24 Touch Screen
SKU: 815789- Support power outage recovery, filament outage detection, auto-off after finish printing, etc functions.
- Ability to manual/auto bed leveling.
- Wirelessly remote control, Cloud printing
- Stm32 based processor.
SKU: 815789 -
(Step-Up) Boost Converter
1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A
SKU: 815778- Input voltage :10-60V
- Output voltage: 12-83V (adjustable)
- Output Current: 12A
- Input Current: 20A
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
SKU: 815778 -
Audio Module/ Amplifier
TPA3116D2 DC 12V-24V 2x50W Dual Channel Mini Digital Amplifier D Class 50W+50W
Audio Module/ AmplifierTPA3116D2 DC 12V-24V 2x50W Dual Channel Mini Digital Amplifier D Class 50W+50W
SKU: 815879- Dual-channel stereo, high output power (50W+50W power @ 12V).
- Double panel wiring solves crosstalk.
- Onboard Potentiometer for Volume Control.
- Super mini design allows it to be easily placed in a variety of digital products.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
SKU: 815879 -
-
Stepper Motor Drivers
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module
SKU: 815797This 3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module is a pulse generating module, which used as a signal for stepper drivers. To control the stepper motor,
SKU: 815797 -
-
Audio Module/ Amplifier
TDA7492P 50W Wireless Digital Audio Receiver Amplifier Board
SKU: 815878- 25 W + 25 W continuous output power at THD = 10% with VCC= 20 V and RL= 8 Ω
- Wide-range single-supply operation (8 – 26 V)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 21.6 dB, 27.6 dB, 31.1 dB and 33.6 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection
SKU: 815878 -
-
3D Printer Display and Controller
MKS GEN V1.4 3D Printer Control Motherboard with 50cm USB Cable
SKU: 815798- High-quality MOSFET, and better heat dissipation.
- Dedicated power chip, support 12V-24V power input, the voltage converter chip to solve the heat problem Ramps.
- The firmware can use open-source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
SKU: 815798 -
-
-
Raspberry Pi Hats
DIY Proto HAT Shield for Raspberry Pi 3 /4B
SKU: 815829- Extension for Raspberry Pi’s GPIO.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
SKU: 815829 -
-
Interface Module
RS422 to TTL Power Supply Converter Board
SKU: 815869- RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters
- The module has ESD 15KV protection.
- Onboard to increase the limit of 10 ohms current limiting current protection.
- Module with TVS diode. Anti lightning, peak voltage.
- The module has 120-ohm termination resistors, which can effectively reduce the interference of long-range communication.
SKU: 815869 -
Display for Arduino
3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno
SKU: 815796- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
SKU: 815796 -
Robot Kits and Parts
DOBOT Magician Arduino Artificial Intelligence Kit
SKU: 811279- Basic AI Kit for Dobot Magician
- Features an entry-level Learning Kit for Artificial Intelligence
- Lets you explore Machine Intelligence via Human-machine Interaction
- Provides experience the Fun of Electronic Production in PBL
- Uses Smartly Play technology in Open Source Electronic Platform
- Compatible with  (not included)
SKU: 811279 -
-
-
-
(Step-Up) Boost Converter
200W DC-DC Boost Converter 6-35V to 6-55V Step-Up Adjustable Power Supply
SKU: 815785- Input voltage :6-35V
- Output voltage: 6-55V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 7A (MAX)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
SKU: 815785 -
-
Limit Switch
Optical Endstop Photoelectric Light Control Optical Limit Switch for 3D Printer
SKU: 815859- Increased reliability
- Increased precision
- Dimensions : 33 x 11 x 10 mm.
- Weight: 10 gm.
- Optical Endstop Switches help to protect your 3D printer or machine from moving past its intended range and damaging itself.
SKU: 815859 -
-
-
Raspberry Pi Accessories
2.4G Wireless Mini Touch Keyboard with Colorful Backlight for Raspberry PI 4B/3B/3B+
Raspberry Pi Accessories2.4G Wireless Mini Touch Keyboard with Colorful Backlight for Raspberry PI 4B/3B/3B+
SKU: 815788- RGB Backlight Keys
- Onboard trackpad with all mouse function
- Left+Right click Gaming keys
- Operate on inbuilt Rechargeable battery
- Navigation, Volume Rockers and Home key
- Portable Pocket Size
- Plug and Play operation, No drivers needed to install
- Compatible with all Devices and operating Systems
SKU: 815788