Search results: “a4988 stepper motor”
Showing 1–48 of 1266 results
-
-
3D Printer Motor Drivers
MakerBase MKS A4988 Stepper Motor Driver Module
SKU: 1632932- Operating Voltage: 8V to 35V
- Continuous Current Per Phase: 1A – 2A (Max with Heat Sink)
- Logic Voltage: 3V to 5.5V
- Microstep Resolutions: Full; 1/2; 1/4; 1/8; 1/16
- Heat Sink: Included (With Adhesive Thermal Backing)
- Protection: Overcurrent, Under-Voltage Lockout, Automatic Chopping Control
- Dimensions: 15 x 20mm
SKU: 1632932 -
Stepper Motor Drivers
A4988 Stepper Motor Driver Controller Board- RED
SKU: 699614- Compact size, easy to install and use.
- All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
- Jm connection motor: Jv Connects 5V and 12V-24V Power Supply.
- E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
SKU: 699614 -
-
-
Stepper Motor Drivers
Green A4988 driver Stepper Motor Driver- Normal Quality
SKU: 1483566- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
SKU: 1483566 -
3D Printer Stepper Motors, Stepper Motors
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
3D Printer Stepper Motors, Stepper Motors28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
SKU: 17304- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
SKU: 17304 -
Stepper Motor Drivers
TMC2100 Stepper Motor Driver, Module
SKU: 1121430- This driver has 200 steps per revolution in full step (1.8 degrees per step).
- Allowable continuous current per phase: 1.25A (RMS) or 1.77A (max)
- The maximum current in the short term for each phase: 2.5A
- Motor voltage: 5.5 to 46 V
- StealthChop mode to reduce noise
- SpreadCycle mode to increase torque
SKU: 1121430 -
-
Motor/Drivers & Accessories on Sale, Stepper Motor Drivers
TMC2209 Stepper Motor DriverF
SKU: 835841- Maximum current: 2A per phase (continuous, with cooling), 2.8A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: 835841 -
Stepper Motor Drivers
TMC2209 Stepper Motor Driver Module with Heatsink
SKU: 1555083- Operating Voltage: 4.5V to 28V DC
- Input Signal Logic Voltage: 3.3V to 5V DC
- Maximum Peak Current: 2A per phase (use with Heatsink and Fan only)
- Maximum Continuous Current: 2A
- Compatibility: 3V3 and 5V microcontrollers
SKU: 1555083 -
-
-
Stepper Motor Drivers
TMC2208 Stepper Motor Driver Module
SKU: 699623- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: 699623 -
-
Stepper Motor Drivers
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
SKU: 6721- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions:Â full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
SKU: 6721 -
-
Other 3D Printer Accessories
Reprap StepStick heat sink, 9*9*12MM cooler Aluminum, heat dissipation suitable for, drv8825/A4988/A4983/MKS, TMC2100 Mendel
Other 3D Printer AccessoriesReprap StepStick heat sink, 9*9*12MM cooler Aluminum, heat dissipation suitable for, drv8825/A4988/A4983/MKS, TMC2100 Mendel
SKU: 1121398- Quantity of blade:
- Material: Aluminum
- Color: Black
- Blade thickness:
- Base plate thickness:
- Compatible with:drv8825/A4988/A4983/MKS TMC2100 Mendel
- Dimensions: 9x9x12 mm
SKU: 1121398 -
Stepper Motor Drivers
BIGTREETECH TMC5160T V1.0 Stepper Motor Driver
SKU: 1611662- High-power stepper motor with MOS power expansion
- Low heat generation
- StealthChop2 mode for TRINAMICs eliminates motor noise by reducing resonance
- CoolStep current control optimizes driver performance and energy efficiency
SKU: 1611662 -
Stepper Motor Drivers
ULN2003A Driver Module Stepper Motor Driver
SKU: 28379- 5-12V power supply
- 4-way signal indicator
- Chip all the pins have Input leads Mounted for easy connection to use
- XH-5P socket can be connected directly 28BYJ-48 Model stepper motor
- Dimensions: 32 x 18 x 11mm (LxWxH)
- Weight: 3 gm
SKU: 28379 -
Stepper Motor Drivers
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
Stepper Motor DriversTB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
SKU: 835839- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10~45℃
- H bridge bipolar constant current drive.
SKU: 835839 -
-
3D Printer Motor Drivers
Two Trees – Stepper Motor Driver TB6600 4A
SKU: 1645775- H bridge bipolar constant current drive.
- The biggest 4.0 A Eight kinds of output current are optional.
- The biggest 32 To subdivide 6 kinds of subdivision modes selectable.
- Input signal high-speed photoelectric isolation.
- A total of standard single pulse interfaces.
SKU: 1645775 -
-
-
-
Stepper Motor Drivers
Leadshine DM542 Digital Stepper Motor Driver
SKU: 6745- Good high-speed performance
- Supply voltage up to +50VDC
- Output current up to 4.2A
- Pulse frequency up to 300 KHz
- Automatic idle-current reduction
- 3-state current control technology
- Self-adjustment technology
- Pure-sinusoidal current control technology
SKU: 6745 -
-
Pololu Motor Drivers
Pololu DRV8834 Low-Voltage Stepper Motor Driver Carrier
SKU: 1607671- Built-in regulator (no external logic voltage supply needed)
- Short-to-ground, short-to-supply, and shorted-load protection
- 4-layer, 2Â oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
- Simple step and direction control interface
SKU: 1607671 -