rs485
Showing all 12 results
-
Interface Module
Waveshare Industrial Grade Isolated RS232 to RS485 Converter (Without Power Adapter)
Interface ModuleWaveshare Industrial Grade Isolated RS232 to RS485 Converter (Without Power Adapter)
SKU: 968460- Product type: industrial-grade isolated converter
- Baudrate: 300-921600bps
- Device port: RS232/RS485 standard complaint
- 1200m transmission distance of RS485
- 15m transmission distance of RS232
SKU: 968460 -
-
Interface Module
Waveshare Industrial USB to RS485 Converter
SKU: 938890- Original FT232RL and SP485EEN
- Product type: industrial converter
- Baudrate: 300-921600bps
- Host port: USB
- Device port: Â RS485
- USB with the protection of 200mA self-recovery fuse, ESD protection
- RS485 with the protection of 600W lightning-proof and surge-suppress, 15KV ESD protection
- Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP
SKU: 938890 -
-
Interface Module
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
SKU: 44051- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
- All-copper DR9 seat, anti-oxidation, better contact;
- Military board, three anti-paint sprays an entire board, corrosion-resistant;
- Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
- Use of environmentally friendly copper terminals, through IS0-9001.
SKU: 44051 -
Interface Module
DB9 Male Screw Terminal to RS232 RS485 Conversion Board
SKU: 44052- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
- All-copper DR9 seat, anti-oxidation, better contact;
- Military board, three anti-paint sprays an entire board, corrosion-resistant;
- Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
- Use of environmentally friendly copper terminals, through IS0-9001.
SKU: 44052 -
Interface Module
HEXIN RS232 to RS485 serial port Data interface adapter Converter
SKU: 766352- Transmission distance: 1.2 mile (RS-485), 5 meters(RS-232)
- Transmission Speed: 300-115200 bps
- Working Modes: Asynchronous, half-duplex, differential transmission
- Transmission Media: Common wire, doule wire, UTP or Shielding Line
- Work Environment: -10°C to 85°C
SKU: 766352 -
Interface Module
MAX485 TTL To RS485
SKU: 29796- On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
- A low power consumption for the RS-485 communication
- Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
- Slew-rate limited transceiver
- All pins of the chip have been lead to can be controlled through the microcontroller.
- Convenient RS-485 communication wiring
- Multiple Units can be connected to the same RS-485 bus wiring.
- All Chip pins are brought out for proper controls
SKU: 29796 -
Interface Module
USB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS
SKU: 43951- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Baud Rate Range: 75bps – 115200bps, up to 6Mbps
- Supports Plug, Play and hot-swap ( USB side)
- Better than using CH341D chip or similar chip to support the laptop USB port.
- Communication distance up to 1.2KM
SKU: 43951 -
Interface Module
USB to RS485 TTL Serial Converter Adapter FT232
SKU: 28453- Baud rate: 300 – 9216000bps, automatically detecting the serial signal data rate
- Load capacity: support multipoint, each converter allows RS485 interface device to connect 32
- Interface Protection: TVS tube protection, USB self-recovery protection
- Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac
- It can be up to 32 devices on the bus.
SKU: 28453
