Cameras are complex devices that require expertise in hardware/software engineering and driver development. You don’t have to become a full-stack camera developer to start your project – we’ll provide the camera straightforward enough so you can concentrate on what you’re good at.
Arducam has been offering camera solutions for a decade, mainly by solving camera-related problems for prevailing hardware platforms among developers, such as Arduino, Raspberry Pi, Jetson Nano, and so on. We’re the camera local guide to help you get the work done.
Arducam
Showing 1–48 of 97 results
-
-
Arducam Cameras and Accessories
Arducam Camera Ribbon Flex Extension Cable Set (7Pcs), 5.9″ 7.87″ 11.8″ 19.69″ 39.37″ for Raspberry Pi
Arducam Cameras and AccessoriesArducam Camera Ribbon Flex Extension Cable Set (7Pcs), 5.9″ 7.87″ 11.8″ 19.69″ 39.37″ for Raspberry Pi
SKU: 869381- High-Quality Cables
- 5 Lengths for Normal Raspberry Pi Models
- 2 Length for Raspberry Pi Zero
- Comes With Both 15 pin as well as 22 pin cable connectors
SKU: 869381 -
-
Arducam Cameras and Accessories
Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera V3/V1/V2/HQ (Pack of 2, 1 Set)
Arducam Cameras and AccessoriesArducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera V3/V1/V2/HQ (Pack of 2, 1 Set)
SKU: 1496034- Natively Supported: Raspberry Pi Camera V3, V2, V1, HQ.
- Highly Compatible: Compatible with all Raspberry Pi 4B/3B+/3B/2B/A&B
- Software: Ready for the latest Raspberry Pi OS and camera software (libcamera).
- Headphone Jack: Reserved extra Pins for GPIO extension.
- Zero Configuration: Easy to set up, plug-n-play out of the box
- Reliability: Robust and durable. No worry about the fragileness and vulnerability of FPC cables’ crisp nature.
SKU: 1496034 -
Arducam Cameras and Accessories
Arducam Camera Breakout Board 0.3MP(OV7725) w/ M12 lens (6mm lens)
SKU: 869380- High Sensitivity Camera For Low-Light Operation
- Standard SCCB Interface
- Output support for Raw RGB, RGB (GRB 4:2:2, RGB565/555/444) and YCbCr (4:2:2) formats
- Supports image sizes: VGA, QVGA, and any size scaling down from CIF to 40×30
- Lens Shading Correction
- Saturation Level Auto Adjust (UV Adjust)
SKU: 869380 -
Arducam Cameras and Accessories
Arducam Auto Focus Camera, Autofocus for Raspberry Pi Camera Module, Motorized Focus Lens, OV5647 5MP 1080P, Compatible with Pi 4/3B+/3
Arducam Cameras and AccessoriesArducam Auto Focus Camera, Autofocus for Raspberry Pi Camera Module, Motorized Focus Lens, OV5647 5MP 1080P, Compatible with Pi 4/3B+/3
SKU: 1029204- Sensor: 5MP OV5647
- Still Picture: 2592×1944 Max
- IR sensitivity: Integral IR filter, visible light only
- Focus Type: Motorized focus
- Field of View: 54°×44° (H×V)
- Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms
SKU: 1029204 -
-
-
Arducam Cameras and Accessories
Arducam IMX219 Visible Light Fixed Focus Camera Module for Raspberry Pi
Arducam Cameras and AccessoriesArducam IMX219 Visible Light Fixed Focus Camera Module for Raspberry Pi
SKU: 1250096- Sensor: Sony 8MP IMX219 Sensor
- Frame Rates: 21fps@8MP, 30fps@1080P, 120fps@720
- IR sensitivity: Integral IR filter, visible light only
- Focus Type: Motorized focus
- View Angle: 62.2 (Diagonal)
- Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms
SKU: 1250096 -
Arducam Cameras and Accessories
Arducam 5MP OV5647 NoIR MINI Camera with Flex Cable
SKU: 869369- Sensor: 1/4 inch OV5647 sensor in a fixed-focus lens
- Angle of view: 72.4° diagonal
- Integral IR filter, visible light
- Still picture resolution: 2592 x 1944, Max video resolution: 1080p
- Dimension: 60mm × 11.5mm × 5mm.
SKU: 869369 -
-
-
Arducam Cameras and Accessories
Arducam IMX219 Auto Focus Camera Module, Drop-In Replacement for Raspberry Pi V2 Camera and Jetson Nano
Arducam Cameras and AccessoriesArducam IMX219 Auto Focus Camera Module, Drop-In Replacement for Raspberry Pi V2 Camera and Jetson Nano
SKU: 1324287- Model: Arducam IMX219 Auto Focus Camera Module
- Sensor: Sony 8 MP IMX219
- Optical Format: 1/4 inch
- Frame Rate: 30fps at 8MP, 60fps at 1080p, 180fps at 720p
- Data Format: RAW8/RAW10
SKU: 1324287 -
-
-
-
Arducam Cameras and Accessories
Arducam 2MP Ultra Low Light STARVIS IMX327 Motorized IR-CUT Camera for Raspberry Pi
Arducam Cameras and AccessoriesArducam 2MP Ultra Low Light STARVIS IMX327 Motorized IR-CUT Camera for Raspberry Pi
SKU: 1496031- Low Light: Ultra-low light Sony STARVIS IMX327 sensor
- Motorized IR-Cut: Motorized IR-CUT function under different lighting condition
- Native to Raspberry Pi: No need to install an additional driver
- High Frame Rate: 90fps at 1280×720 resolution, 46fps at 1920×1080
SKU: 1496031 -
Arducam Cameras and Accessories
Arducam 5MP OV5647 NoIR Camera Module for Raspberry Pi 4/3B+/3
SKU: 869372- 1/4″ 5MP NoIR Camera Module OV5647 Sensor with flex cable for Raspberry Pi
- High-Definition video camera for Raspberry Pi Model A/B/B+, Raspberry Pi 2/3/3B+/4
- 5MP Omnivision OV5647 sensor in a fixed-focus lens
- No IR filter, sensitive to IR light
SKU: 869372 -
Arducam Cameras and Accessories
Arducam 8MP IMX219 Camera Module with Fisheye Lens for Jetson Nano and Raspberry Pi Compute Module
Arducam Cameras and AccessoriesArducam 8MP IMX219 Camera Module with Fisheye Lens for Jetson Nano and Raspberry Pi Compute Module
SKU: 945450- Sony 8MP IMX219 Sensor
- Optical Format: 1/4 inch
- Frame Rate: 30fps@8MP, 60fps@1080p, 120fps@720p
- Data Format: RAW8/RAW10
- Lens part number: M32076M20
SKU: 945450 -
Arducam Cameras and Accessories
Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module CM3, CM3+ and CM4
Arducam Cameras and AccessoriesArducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module CM3, CM3+ and CM4
SKU: 869383- Based on the Sony 8MP IMX219 Sensor
- Comes With 175° Wide Angle M12 Lens
- Frame Rate up to 120FPS @720P
- Integrated IR Filter
- Fixed Focus Type
SKU: 869383 -
Arducam Cameras and Accessories
Arducam 5MP OV5647 NoIR Motorized IRcut filter M12 Mount LS-1820 Lens Camera for Raspberry Pi
Arducam Cameras and AccessoriesArducam 5MP OV5647 NoIR Motorized IRcut filter M12 Mount LS-1820 Lens Camera for Raspberry Pi
SKU: 869370- Comes With a Motorized IR Cut Filter and M12x0.5 Mount
- Compatible With Raspberry Pi 4/3B+/3
- Based on ov5647 5MP camera
- Automatic Switching Between Day and Night Mode
SKU: 869370 -
Arducam Cameras and Accessories
Arducam 5MP Autofocus USB Camera Module with Single Microphone for Windows, Linux, MacOS, Android
Arducam Cameras and AccessoriesArducam 5MP Autofocus USB Camera Module with Single Microphone for Windows, Linux, MacOS, Android
SKU: 1718472- Resolution: 5MP
- Color Filter Type: Color
- Shutter Type: Rolling shutter
- Optical Size: 1/4″
- Output Format: YUYV/MJPG
- Pixel Size: 1.4μmx1.4μm
- Sensor Active Area: 2592(H)×1944(V)
SKU: 1718472 -
Arducam Cameras and Accessories, Raspberry Pi Camera
Arducam IMX219 1080P Raspberry Pi Camera Module with ABS Case
Arducam Cameras and Accessories, Raspberry Pi CameraArducam IMX219 1080P Raspberry Pi Camera Module with ABS Case
SKU: 1263924- A fixed focus: 62.2 (H) and a focal length of 3.04mm.
- Sensor: 8MP IMX219
- Resolution is 3280 x 2464 pixels.
- Frame Rates: supports 1080p30, 720p60 and VGA90 video modes.
- Focal Length: 3.04 mm; Angle of View: H=62.2 degree, V=48.8 degree
- IR Sensitivity: Integral IR filter, visible light only
SKU: 1263924 -
Arducam Cameras and Accessories
Arducam 12MP IMX708 HDR 120° Wide Angle Camera Module with M12 Lens for Raspberry Pi
Arducam Cameras and AccessoriesArducam 12MP IMX708 HDR 120° Wide Angle Camera Module with M12 Lens for Raspberry Pi
SKU: 1651646- Image Sensor: IMX708
- Still Resolution: 11.9 Megapixels
- Sensor Resolution: 4608 x 2592 pixels
- Pixel Size: 1.4μm × 1.4μm
- Focus Type: Manual Focus
- Focal Length: 2.87mm
SKU: 1651646 -
-
Arducam Cameras and Accessories
Arducam 1080P Day & Night Vision USB Camera Module, 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam with IR LEDs
Arducam Cameras and AccessoriesArducam 1080P Day & Night Vision USB Camera Module, 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam with IR LEDs
SKU: 1373771- Sensor: 1/2.7” OV2710
- Day/Night Vision: IR-CUT Filter switched in and out automatically based on light condition
- HD Resolution: This camera adopts a 2MP OV2710 sensor for sharp image, Max. resolution: 1920*1080
- High Frame Rates: MJPG 30fps@1080P; YUY2 30fps@640x 480; High-speed USB 2.0 interface.
SKU: 1373771 -
Arducam Cameras and Accessories
Arducam 8MP IMX219 Motorized Focus Camera Module for NVIDIA Jetson Nano (NoIR)
Arducam Cameras and AccessoriesArducam 8MP IMX219 Motorized Focus Camera Module for NVIDIA Jetson Nano (NoIR)
SKU: 869376- Autofocus 8MP IMX219 Module (Visible light only)
- Mainly designed for the NVIDIA Jetson nano.
- Work with Raspberry Pi compute module but not other standard Raspberry Pi models.
SKU: 869376