Cytron, an electronics company, based in Malaysia, was founded in 2004 by five Universiti Teknologi Malaysia (UTM) students. Their primary goal is to help others by sharing their robotics expertise and getting those hard-to-find parts for projects for Students and Educators. Robu.in has been Cytron’s exclusive partner in India since 2014 and we are proud to be sharing a common goal in empowering the DIY & Robotics community with innovative and useful products at economical prices. Cytron is famous throughout the world for its Motor Drivers as well as IoT based products!
Cytron
Showing 1–48 of 91 results
-
-
Cytron Motor Drivers
Cytron Maker Reflect: Simplifying IR Reflectance Sensor for Beginner
SKU: 718385- Operating Voltage: 3.3V and 5V Compatible
- Sensing Distance (Height): 1mm to 40mm (Vcc = 5V, Blackline on a white surface)
- Features a tiny reflectance sensor
- This sensor is used in line following robot
- Fits easily in the tightest space
SKU: 718385 -
-
PIC Programmer
ICSP Programmer Socket – UIC-S
SKU: 10048-
No external power needed
-
Power Indicator LED on board
-
Fit perfectly with UIC00A and UIC00B
-
Support 18-pin, 28-pin, and 40-pin 8-bit PIC microcontroller.
-
Selector to program 18-pin or 28-pin&40-pin PIC
-
Come with 40-pin ZIF socket for ease of plug and unplug of PIC
SKU: 10048 -
-
PIC Programmer
ICSP Universal Socket
SKU: 10061To ease user, Cytron has created this UIC-A so that user can use any programmer regardless of the development board. For example, a development board which uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
SKU: 10061 -
Cytron Motor Drivers
Cytron LCD keypad Shield High Quality
SKU: 25582- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: 25582 -
Cytron Motor Drivers
Cytron Maker Drive H-Bridge Motor Driver
SKU: 381588- Dual channel, Bi-directional control motor driver
- Support motor voltage from 2.5V to 9.5VDC
- Maximum current up to 1.0A continuous and 1.5A peak (<5 seconds)
- 5V Output (200mA) to power the controller.
- Inputs compatible with 1.8V, 3.3V and 5V logic (Arduino, Raspberry Pi, etc).
- Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
- Regenerative Braking
SKU: 381588 -
-
PIC Development board
18 Pins PIC Start-up Kit – SK18B
SKU: 10064-
Compact, powerful, flexible and robust start-up platform.
-
No extra components required for the PIC to function.
-
No more frustrated work plugging PIC out and back for re-programming.
-
Perfectly fit for 18 pins PIC16F MCU.
-
With UIC00A, the program can be loaded in less than 4 seconds.
-
On/Off switch for main power
-
DC adaptor socket as power input
SKU: 10064 -
-
PIC Development board
16-bit or 32-bit PIC Start-Up Kit – SK1632
SKU: 10062-
Input voltage range: 7V to 15VDC.
-
1 x Programmable push button (digital input, connected to A1)
-
1 x Programmable LED (active high, connected to A0)
-
Replaceable Crystal (default 8MHz)
-
Ready pads for 2×8 Character parallel interface LCD
-
USB micro B socket for PIC that supports USB peripheral
-
USB bootloader may be utilized if needed
SKU: 10062 -
-
Shield for Arduino
Cytron XBee Shield
SKU: 7981-
Mounts directly onto your Arduino
-
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
-
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
-
Extra 0.1″ spaced prototyping holes
-
Reset button brought out to shield
-
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
SKU: 7981 -
-
PIC Development board
28 Pins PIC Start-up Kit – SK28A
SKU: 10080-
Industrial grade PCB.
-
Every board is being tested before it is shipped out.
-
Compact platform and breadboard-friendly
-
Suitable for hobbyists and expert.
-
Save development and soldering time.
-
Turn pin for crystal comes with 20MHz Crystal by default, the user may use crystal at various frequencies
-
Mini USB socket on board may use PIC18F2550 for USB device development, example USB Bootloader.
-
2×8 Character Parallel LCD pad ready (optional).
SKU: 10080 -
-
Cytron Motor Drivers
Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
SKU: 381249- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Operating Voltage: DC 4V to 16V
- Maximum Motor Current: 3A continuous, 5A peak
- Buck-boost regulator to produce 5V output (200mA max).
- Buttons for quick testing.
SKU: 381249 -
Cytron Motor Drivers
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
SKU: 56432- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
SKU: 56432 -
PIC Development board
Cytron 40 pins PIC Start-Up Kit SK40C
SKU: 10095-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
Operating Voltage Range: 7V – 15VDC
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
-
UART connection to interface with other controller or even computer.
SKU: 10095 -
-
Shield for Arduino
Cytron G15 Shield
SKU: 6265-
Arduino reset button
-
4 x G15 Cube Servo ports.
-
External power port for a servo with polarity protection
-
Stackable I/O header pin
-
Selectable digital pins for the control pin with mini jumpers
-
TX and RX indicator LEDs to show communication activities, only on Rev2.0.
-
Selectable Serial pins, Either hardware serial or software serial via mini jumpers, only on Rev2.0
SKU: 6265 -
-
-
Cytron Motor Drivers
Cytron Maker Line: Simplifying Line Sensor For Beginner
SKU: 718381- Operating Voltage: DC 3.3V and 5V compatible (With reverse polarity protection).
- Recommended Line Width: 13mm to 30mm.
- Sensor Refresh Rate: 200Hz
- Easy calibration process.
- Supports a wide range of controllers such as Arduino, Raspberry Pi, etc.
SKU: 718381 -
-
-
Cytron Motor Drivers
Cytron 10 A Switch Control Potentiometer DC Motor Driver (MD10POT)
SKU: 234226The MD10-POT control circuit is designed to enable the speed to be controlled via a potentiometer (10K Ohm) which is included in the package. It does not work with analog voltage from an external controller The 3-way rocker switch is used for start/stop and direction control.
SKU: 234226 -
Cytron Motor Drivers
USB ICSP PIC Programmer – UIC00B
SKU: 10053- Program most of the +3.3V or +5V PIC
- Compatible with PICkit2’s UART Tool and Logic Tool
- The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
-
Compatible with Windows XP, Vista, 7, 8 and 8.1.
-
Compatible with Microchip’s PICkit 2.
-
Powered directly from the USB port.
-
NO EXTERNAL POWER REQUIRED for UIC00B to function.
-
Compatible with PICkit2’s Logic Tool and UART Tool.
SKU: 10053 -
Cytron Motor Drivers
Cytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C
SKU: 2777- Bi-directional control for 1 brushed DC motor, single channel
- Support motor voltage ranges from 5V to 30V.
- Maximum current up to 13A continuous and 30A peak (10 seconds).
- 3.3V and 5V logic level input.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: 2777 -
PIC Development board
40 Pins dsPIC Start-Up Kit – SKDS40A
SKU: 10086-
ICSP connector for UIC00A /B-simple and fast method to load program.
-
Perfectly fit for 40 pins dsPIC (16-bit), NOT for the 40-pins 8-bit PIC.
-
2 x programmable switch.
-
2 x programmable LED indicator.
-
Changeable Crystal – default 10MHz.
-
Existing pad for 16 x 2 characters LCD display.
SKU: 10086 -
-
Cytron Motor Drivers
10A Motor Driver Shield – MD10
SKU: 3408- Bi-directional control of 1 brushed DC motor.
- Support motor voltage ranges from 7V to 25V, .
- Maximum current up to 10A continuous and 15A peak (10 seconds).
- Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 10KHz.
- Selectable digital pins for PWM and DIR.
SKU: 3408 -
Shield for Arduino
PS2 Controller Starter Kit
SKU: 7438- Stable 5V powered, low current consumption, less than 150mA.
- 1 standard PS2 controller socket.
- Communicate with host microcontroller through 5V TTL UART.
- Simple inquiry command and button status feedback for the host process.
- Vibrator motor is controllable.
- Wired or wireless PS2 controller is fully compatible.
- A small LED as the indicator for communication between SKPS and PS2 controller.
SKU: 7438 -
PIC Development board
40 pins PIC Start-Up Kit Combo 1 – SK40C PIC16F877A (SK40C1)
SKU: 10097-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
SKU: 10097 -
-
PIC Development board
CIKU PIC PIC18F4550 based Arduino form factor starter kit
SKU: 10107-
Comes with pre-programmed PIC18F4550 with USB bootloader.
-
PIC18F4550 running at 48MHz (after PLL with 10MHz external crystal).
-
Power via USB or external DC adapter (7 – 12V).
-
On board 5V 800mA (Max 1A) voltage regulator.
-
On board 3.3V 500mA (Max 500mA) voltage regulator.
-
USB mini-B receptor for USB connection.
-
20 digital I/O pins.
-
6 analog input pin.
-
2 PWM output pin.
SKU: 10107 -
-
Cytron Motor Drivers
MD13S 13Amp DC Motor Driver – GROVE Compatible
SKU: 24027-
Support motor voltage ranges from 6V to 30V
-
Maximum current up to 13A continuous and 30A peak (10 seconds).
-
GROVE compatible
-
3.3V and 5V logic level input.
-
SMD compatible
- Peak Current (A): 30 (10 seconds)
- Continuous Current (A): 1
- No. of Channels: 1
SKU: 24027 -
-
Cytron Motor Drivers
Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno
SKU: 43298- Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
- Separate 3.3V voltage regulator for ESP8266-12 WROOM-02 module, 500mA max output.
- Each and every board is preassembled and tested before it is being shipped out to you.
- 802.11 b/g/n.
- Support Wi-Fi Direct (P2P), soft-AP.
- Integrated TCP/IP protocol stack.
SKU: 43298 -
Cytron Motor Drivers
Cytron 2Amp Motor Driver Shield
SKU: 16014-
Logic control, 5V from Arduino main board
-
Polarity protection for External motor power input
-
2 fast test buttons for each motor channel
-
Motor Driven Voltage:6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source)
-
Up to 2A current each channel
-
Pin 4, 5,6,7 are used to drive two DC motor
-
Support PWM speed control
-
Support advance speed control
SKU: 16014 -
-
Cytron Motor Drivers
Cytron Maker UNO RP2040 : Simplifying Robotics with Raspberry Pi RP2040
SKU: R110639- Raspberry Pi RP2040 with dual-core Arm Cortex-M0+ processor.
- 264 KB RAM for efficient processing.
- Flash Memory 2 MB for storing programs and data.
- USB-C (5V) and LiPo/Li-Ion battery support.
6x Grove Ports and 1x Maker Port for versatile interfacing. - 4x dedicated ports for seamless servo motor integration.
SKU: R110639 -
Cytron Motor Drivers
Cytron Arduino PS2 Shield
SKU: 2506- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
SKU: 2506 -
PIC Development board
40 pins PIC Start-Up Kit Combo 2 SK40C + PIC18F4550 (SK40C2)
SKU: 10105-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
-
UART connection to interface with other controller or even computer.
-
USB on board for certain PIC18F.
SKU: 10105 -
-
Refurbished, Refurbished Motors | Drivers | Pumps | Actuators
Refurbished – Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
Refurbished, Refurbished Motors | Drivers | Pumps | ActuatorsRefurbished – Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
SKU: R104722- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: R104722 -
-
-
Shield for Arduino
Cytron Easy MP3 Shield
SKU: 7982-
Onboard high-quality MP3 decoder.
-
Onboard dual channel/Stereo 3W differential audio amplifier for an external speaker.
- A MicroSD status LED.
-
Onboard stereo 3.5mm audio jack socket for earphones.
-
Onboard microSD socket for MP3 audio files storage.
-
The interface from Arduino, UART, selectable to use soft serial.
-
Stackable side headers.
- Supply voltage: 5V.
SKU: 7982 -
-
Cytron Motor Drivers
Cytron Uno Board ATmega328 Microcontroller (Arduino Compatible)
SKU: 766269- A better version of Arduino Uno
- SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader
- USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable)
- Input voltage: DC7-15V
- 14 Digital I/O Pins (6 PWM outputs)
SKU: 766269