Pololu
Showing all 16 results
-
Brushed / Brushless DC motor Driver
Pololu DRV8835 Dual Motor Driver Carrier
SKU: 1607672- Under-voltage lockout on the logic supply and protection against over-current and over-temperature
- Reverse-voltage protection on the motor supply
- Compact size (0.7″×0.4″) with the form factor of a 14-pin DIP package
- Inputs are 3V- and 5V-compatible
SKU: 1607672 -
-
Stepper Motor & Drivers
Pololu DRV8834 Low-Voltage Stepper Motor Driver Carrier
SKU: 1607671- Built-in regulator (no external logic voltage supply needed)
- Short-to-ground, short-to-supply, and shorted-load protection
- 4-layer, 2Â oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
- Simple step and direction control interface
SKU: 1607671 -
Robot Kits and Parts
Pololu 3pi+ 32U4 OLED Robot Kit with 30:1 MP Motors (Standard Edition Kit)
SKU: 1607667- Quadrature encoders on both motors for closed-loop position and speed control
- Graphical OLED display
- Full 9-axis IMU (three-axis gyro, accelerometer, and compass)
- Full wrap-around bumper to protect electronics from collisions
SKU: 1607667 -
Brushed / Brushless DC motor Driver
Pololu DRV8256E Single Brushed DC Motor Driver Carrier
SKU: 1607670- built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature
- simple two-pin speed direction interface
- Under-voltage lockout and protection against over-current and over-temperature
- Simple interface requires only two I/O lines (one for direction and another for speed)
SKU: 1607670 -
-
Brushed / Brushless DC motor Driver
Pololu DRV8838 Single Brushed DC Motor Driver Carrier
SKU: 1607673- Reverse-voltage protection on the motor supply
- H-bridge motor driver: can drive one DC motor
- Motor supply voltage: 0Â V to 11Â V
- Logic supply voltage: 1.8Â V to 7Â V
- easy to use with standard solderless breadboards
SKU: 1607673 -
-
Brushed / Brushless DC motor Driver
Pololu MAX14870 Single Brushed DC Motor Driver Carrier
SKU: 1607674- No separate logic supply needed; inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Carrier board adds reverse-voltage protection
- Compact size (0.6″×0.5″)
SKU: 1607674 -
Brushed / Brushless DC motor Driver
Pololu BD65496MUV Single Brushed DC Motor Driver Carrier
SKU: 1607669- Under-voltage lockout on the logic supply and protection against over-temperature
- Carrier board adds reverse-voltage protection on the motor supply
- Compact size (0.6″×0.6″)
- Built-in under-voltage and over-temperature protection
SKU: 1607669 -
Stepper Motor & Drivers
Pololu AMIS-30543 Stepper Motor Driver Carrier
SKU: 1607668- Compatible with 5Â V and 3.3Â V microcontrollers
- Integrated 5V regulator that can be used to supply an external microcontroller
- Integrated watchdog function
- Open coil detection
- Thermal warning indicates when the driver is close to the thermal shutdown temperature
- Over-current status and shutdown (short-to-ground and shorted-load protection)
- Reverse voltage protection
SKU: 1607668 -
Stepper Motor & Drivers
Pololu TB67S249FTG Stepper Motor Driver Compact Carrier
SKU: 1607681- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Open-load detection
- Active-low error outputs indicate over-current, over-temperature, or open-load condition
- Compact size (0.6″ × 0.8″)
- 4-layer, 2 oz copper PCB for improved heat dissipation
SKU: 1607681 -
Stepper Motor & Drivers
Pololu High-Power Stepper Motor Driver 36v4
SKU: 1607680- Inputs compatible with 1.8Â V, 3.3Â V, and 5Â V logic
- Under-voltage lockout, over-current protection, short circuit protection, and reverse-voltage protection (up to 40Â V)
- High-power: can deliver up to 4Â A continuous per phase without extra cooling (6Â A max with sufficient additional cooling)
- Highly configurable through SPI interface
- Optional STEP/DIR control pins (stepping can also be controlled through SPI interface alone)
SKU: 1607680 -
-
Stepper Motor & Drivers
Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
SKU: 1607675- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3Â V and 5Â V systems
- Over-temperature thermal shutdown, over-current shutdown, short circuit protection, and under-voltage lockout
- 4-layer, 2Â oz copper PCB for improved heat dissipation
SKU: 1607675
