Seeed Studio
Seeed Studio is the IoT hardware enabler providing services that empower IoT developers to swiftly realize their products. By partnering with technology providers from hardware to the cloud, Seeed offers a wide array of hardware platforms and sensor modules ready to be integrated with existing IoT platforms. With Shenzhen’s extensive and flexible supply chain, Seeed also offers customization and agile manufacturing services, ranging from a single unit to over 10,000 units. Seeed serves the global market from its headquarter in Shenzhen, with branch offices in the US and Japan.
Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN
SKU: 758019₹ 3,949.00(inc GST)
- Powerful MCU: Microchip ATSAMD51P19 with ARM Cortex-M4F core running at 120MHz
- Reliable Wireless Connectivity: Equipped with Realtek RTL8720DN, dual-band 2.4Ghz / 5Ghz Wi-F
- Raspberry Pi 40-pin Compatible GPIO
- Compatible with over 300 plug&play Grove modules to explore with IoT
- USB OTG Support
- Support Arduino, Micropython, ArduPy, AT Firmware, Visual Studio Code
- TELEC certificate
Sipeed MAIX-I module w/o WiFi ( 1st RISC-V 64 AI Module, K210 inside )
SKU: 755023₹ 929.00(inc GST)
- Up to 8 channels of audio input data, ie 4 stereo channels
- Simultaneous scanning pre-processing and beamforming for sound sources in up to 16 directions
- 16-bit wide internal audio signal processing
- Dual-core RISC-V 64bit IMAFDC, on-chip huge 8MB high-speed SRAM (not for XMR :D), 400MHz frequency
- Up to 192kHz sample rate
Sipeed M1 dock suit ( M1 dock + 2.4 inch LCD + OV2640 ) K210 Dev. Board for Edge Computing
SKU: 788883₹ 3,420.00(inc GST)
- 28nm process, dual-core RISC-V 64bit IMAFDC, on-chip huge 8MB high-speed SRAM (not for XMR :D), 400MHz frequency (able to 800MHz)
- KPU (Neural Network Processor) inside, 64 KPU which is 576bit width, supports convolution kernels, any form of the activation function.
- APU (Audio Processor) inside, support 8mics, up to 192KHz sample rate, hardcore FFT unit inside, easy to make a Mic Array (MAIX offer it too)
Sipeed Longan Nano RISC-V GD32VF103CBT6 Development Board
SKU: 755021₹ 729.00(inc GST)
- Chip built-in 128KB Flash, 32KB SRAM
- 4 x general purpose 16-bit timer, 2 x basic 16-bit timer, 1 x advanced 16-bit timer
- Watchdog, RTC, Systick
- 3 x USART, 2 x I2C, 3 x SPI, 2 x I2S, 2 x CAN, 1 x USBFS (OTG)
- 2 x ADC (10 channel), 2 x DAC
Sipeed Lichee Nano Linux Development Board 16M Flash Version
SKU: 755018₹ 849.00(inc GST)
- CPU -Allwinner F1C100s, ARM 926EJS processor, up to 900MHz
- Display – 40-pin RGB LCD FPC connector supporting 272×480, 480×800, 1024×600
- Supports 720P video output, support video stream decoding such as H.264 / MPEG
Sipeed Lichee Nano Linux Development Board 16M Flash & WiFi Version
SKU: 755019₹ 1,049.00(inc GST)
- CPU -Allwinner F1C100s, ARM 926EJS processor, up to 900MHz
- Display – 40-pin RGB LCD FPC connector supporting 272×480, 480×800, 1024×600
- Supports 720P video output, support video stream decoding such as H.264 / MPEG
SeeedStudio Grove Universal 4 pin 20cm Unbuckled Cable
SKU: 601463₹ 15.00(inc GST)
₹ 12.71 (+18% GST extra)
- Also known as Standard Grove Cable
- Length: 20 cm
- Pins: 4
- Dimension: 20 cm x 1 cm x 0.5 cm
- Multi-colored (red, black, yellow, and white) cable
- Compatible with all modules included in the Grove system.
SeeedStudio Grove Touch Sensor
SKU: 595624₹ 69.00(inc GST)
₹ 58.47 (+18% GST extra)
- Operating voltage: 2 V- 5.5 V
- Operating current (at Vcc=3V): 1.5 – 3.0μA
- Operating current (at Vdd=3V): 3.5 – 7.0μA
- Output response time: 60 – 220 mS
- Grove compatible interface
- Used chipset: TTP223-BA6
- Power indicator LED
SeeedStudio Grove Temperature, Humidity, Pressure and Gas Sensor
SKU: 672612₹ 2,200.00(inc GST)
- 4-in-1 multiple measurements: Temperature, Humidity, Pressure, Gas
- Low power consumption
- Wide measurement range
- Easy project operation: Grove compatible interface
- Optional output: Individual humidity, pressure and gas sensors can be independently enabled/disabled
SeeedStudio Grove Temperature & Humidity Sensor (DHT11)
SKU: 598801₹ 139.00(inc GST)
₹ 117.8 (+18% GST extra)
- Operating voltage: 3.3 V / 5 V
- Measuring current: 1.3 – 2.1 mA
- Measuring humidity range: 5% – 95% RH
- Measuring temperature range: -20 to 60 ℃
- Full range temperature calibrated compensation
- High precision capacitive humidity sensor
- Long term stability
- Long transmission distance (>20m)
- Low power consumption
SeeedStudio Grove Sound Sensor
SKU: 595946₹ 69.00(inc GST)
₹ 58.47 (+18% GST extra)
- Operating voltage range: 3.3V – 5V
- Operating current: 4 to 5 mA (at Vcc= 5 V)
- Voltage gain: 26 dB (at V=6 V, f=1 kHz)
- Microphone sensitivity: 52 to 48 dB (at f=1 kHz)
- Microphone impedance: 2.2 kΩ
- Microphone frequency: 16 to 20 kHz
- Microphone S/N Ratio: 54 dB
- Inbuilt potentiometer
- Grove compatible interface
- Minimum external parts
SeeedStudio Grove RTC
SKU: 599811₹ 165.00(inc GST)
₹ 139.83 (+18% GST extra)
- Vcc: 3.3 V to 5.5 V
- Battery voltage: 2.0V to 3.5 V
- ROHS: YES
- I2C serial interface
- Programmable square-wave output signal
- 56-byte, battery-backed, NV RAM for data storage
- Automatic power-fail detect and switch circuitry
- Counting of time intervals valid up to 2100
- Consumes less than 500nA in battery-backup mode
SeeedStudio Grove RGB LED Stick (10 – WS2813 Mini)
SKU: 600011₹ 249.00(inc GST)
₹ 211.02 (+18% GST extra)
- Gray levels of each pixel are of 256
- 6777216 full-color display
- Dual-signal wires version, signal break-point continuous transmission
- Intelligent reverse-connection protection.
- Refresh frequency: 2KHz (max)
- Color: Red, green, and blue
- WS2813B IC, 3535 LED components
- Operating voltage: 3.3V / 5V
- RGB channel constant current: 16mA
- Interface: Digital
SeeedStudio Grove Mini PIR Motion Sensor
SKU: 597041₹ 119.00(inc GST)
₹ 100.85 (+18% GST extra)
- Supply voltage: 3.3 V – 5 V
- Working current: 12 – 20 μA
- Sensitivity: 120 – 530 μV (adjustable)
- Max detecting range: 2m (25℃)
- Sensor chip: S16-L221D
- Low power consumption
- Grove compatible interface
- Compact size
- Cost-effective
SeeedStudio Grove Loudness Sensor
SKU: 597665₹ 119.00(inc GST)
₹ 100.85 (+18% GST extra)
- Operating voltage: 3.5-10VDC (nominal 5V )
- Working frequency: 50~2000 Hz
- Sensitivity: -48 to 66 dB
- S/N ratio: >58 dB
- Output signal range: 0 – 1023 (Analog signal)
- Gain adjustable via screw potentiometer
- Wide supply voltage range
- Built-in signal filtering
SeeedStudio Grove LoRa Radio 433MHz
SKU: 672598₹ 1,749.00(inc GST)
- Using RFM95 module based on SX1276 LoRa®
- ~28mA(Avg) @+20dBm continuous transmit
- ~8.4mA(Avg)@standby mode
- ~20mA(Avg) @receive mode, BW-500kHz
- Simple wire antenna or MHF Connector for external high gain antenna
- +20dBm – 100 mW Power Output Capability
SeeedStudio Grove Line Finder v1.1
SKU: 594154₹ 123.00₹ 109.00(inc GST)
₹ 92.37 (+18% GST extra)
You save: ₹ 14.00
- Working voltage (DC): 5 V
- Adjustable detecting range
- Comparator: LMV358
- Photo reflective diode: RS-06WD
- Digital output mode: TTL
- Includes a Grove 4 pin buckled connector cable
- Grove compatible interface
SeeedStudio Grove Inventor Kit for micro:bit
SKU: 602848₹ 2,990.00(inc GST)
₹ 2533.9 (+18% GST extra)
- Cool extension shield with rich and convenient peripherals
- 8 well selected Grove modules for working with micro:bit
- 12 awesome projects to let you get started quickly
- Well documented instruction set
- 4 Grove ports on Shield to cover different interfaces
- Edge connectors for crocodile clip and 4mm banana plugs
- On-board USB port to power up your micro:bit
SeeedStudio Grove Infrared Emitter
SKU: 598684₹ 119.00(inc GST)
₹ 100.85 (+18% GST extra)
- Operating voltage : 3.3V – 5V
- Operating temperature: -40°C to 80 °C
- Distance range: 10 meter (max)
- Peak wavelength : 940nm
- Angle of half intensity (ϕ) = ± 17°
- Radiant intensity : 72 mW/sr
- Grove compatible interface
- Plug and play
SeeedStudio Grove I2C Motor Driver (TB6612FNG)
SKU: 672607₹ 699.00₹ 659.00(inc GST)
You save: ₹ 40.00
- MCU Operating Voltage: 3.3V / 5V
- Motor Supply Voltage: 2.5 ~ 13.5 (5V Typical, 15V Max.)
- Output Current: 1.2 A(ave)/3.2 A (peak)
- Switching Frequency: 100kHz
- Logic Interface: I2C
- I2C Address: 0x14 (default)
