Welcome to Seeed Studio your go-to IoT hardware enabler! At Seeed, we’re dedicated to accelerating the realization of your IoT products. Our collaborations span from hardware to the cloud, offering a diverse array of platforms and sensor modules that seamlessly integrate with existing IoT ecosystems. As the authorized distributor of Seeed Studio at Robu, we’re excited to bring you a curated selection of their top-quality IoT products. Explore our page and find the perfect components to swiftly advance your IoT projects. With Seeed Studio’s innovation and Robu’s commitment, your journey in IoT development just got more exciting!
Seeed Studio
Showing 1–48 of 282 results
-
Beagle Board
Seeed Studio BeagleY-AI Single Board Computer
SKU: R110758- Processor: TI AM67A, Quad 64-bit Arm® Cortex®-A53 microprocessor subsystem at up to 1.4 GHz, multiple cores including Arm/GPU processors, DSP, and vision/deep learning accelerators up to 4 TOPS
- RAM: 4GBÂ LPDDR4
- Wi-Fi: Beagleboard BM3301, 802.11ax Wi-Fi
- Bluetooth: Bluetooth Low Energy 5.4 (BLE)
- Expansion Connect: 40-pin header
SKU: R110758 -
-
-
Seeed Studio SBC
Seeed studio J4011-Edge AI Device with NVIDIA Jetson Orin NX 8GB module
SKU: R101334- CPU: 6-core Arm Cortex -A78AE v8.2 64-bit CPU 1.5MB L2 + 4MB L3
- Memory: 8GB 128-bit LPDDR5 102.4GB/s
- DL Accelerator: 1x NVDLA v2
- Fan: 4 pin Fan Connector(5V PWM)
- Temprature: -10℃~60℃
- Â AI Performance:Â 70 Tops
- Dimension: 130mm x120mm x 58.5mm
SKU: R101334 -
-
IoT Development Boards
Seeed Studio Grove – Vision AI Module V2 – Arm Cortex-M55 & Ethos-U55, TensorFlow and PyTorch supported, Arduino, Raspberry Pi, Seeed Studio XIAO, ESP-based dev board
IoT Development BoardsSeeed Studio Grove – Vision AI Module V2 – Arm Cortex-M55 & Ethos-U55, TensorFlow and PyTorch supported, Arduino, Raspberry Pi, Seeed Studio XIAO, ESP-based dev board
SKU: R100188- Microcontroller: Himax WiseEye2 HX6538 with dual-core Arm Cortex-M55 and integrated Arm Ethos-U55
- Input Voltage (V): 5V
- Power Supply Option: Dual 7-pin connector, Type-C & Grove Connector
- Onboard: PDM Microphone, SD Card Slot
- Baud Rate: 115200
SKU: R100188 -
Bluetooth, WIFI and Trans-receiver ICs
Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
Bluetooth, WIFI and Trans-receiver ICsSeeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
SKU: 1881896- Model: Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
- Powered by the Nordic nRF52840 and Semtech LR1110.
- Multi-protocols.
- Onboard temperature sensor.
- Humidity sensor.
- 3-axis accelerometer.
SKU: 1881896 -
Distance Sensor, PIR / IR and Optical Sensor
Seeed Studio 24GHz mmWave for XIAO
SKU: 1840850- Model: Seeed Studio 24GHz mmWave for XIAO
- Comprehensive Detection
- Intelligent Parameter Adjustment
- Wide Detection Angle
- Long Sensing Distance
- Human body sensor light control
- Life safety protection
- Smart home appliances
SKU: 1840850 -
-
e-Ink Paper Display
1.02″ Flexible Monochrome ePaper Display with 128×80 Pixels
SKU: 1840847- Model: 1.02″ Flexible Monochrome ePaper Display with 128×80 Pixels.
- Exceptional Readability
- Ultra-Low Power Usage
- Flexibility and Portability
- Applications: Reading equipment, Mobile device, Electronic tags and price tags, Smart Wearables
SKU: 1840847 -
Sensor Kits
mmWave Human Detection Sensor Kit
SKU: 1840852- Model: mmWave Human Detection Sensor Kit
- Precision Human Detection
- Flexible Customization
- Easy Setup
- Wireless Updates
- Seamless Connectivity
- Application: Smart Home Automation, Building Security, Healthcare Monitoring, Automatic Doors, Elderly Care
SKU: 1840852 -
e-Ink Paper Display
5.65″ Seven-Color ePaper Display with 600×480 Pixels
SKU: 1840848- Model: 5.65″ Seven-Color ePaper Display with 600×480 Pixels
- Vibrant Display
- Enhanced Contrast
- The 5.65-inch e-paper display module
- Applications: Reading equipment, Mobile devices, Electronic tags and price tags, Smart Wearables
SKU: 1840848 -
PIR / IR and Optical Sensor
Seeed Studio Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
PIR / IR and Optical SensorSeeed Studio Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
SKU: 1770546- Infrared camera sensor: PAG7646J1
- Onboard LED fill light: AU3838A-ZRR-1000mA
- Power supply: 3.3v/5v
- Detection range: 5 to 40cm
SKU: 1770546 -
Other Ultrasonic Sensors
Seeed Studio Grove Ultrasonic Sensor (US5) ToF, distance detection, echo energy intensity value, materials distinguished, 1.6cm in diameter, 1.2cm in height
Other Ultrasonic SensorsSeeed Studio Grove Ultrasonic Sensor (US5) ToF, distance detection, echo energy intensity value, materials distinguished, 1.6cm in diameter, 1.2cm in height
SKU: 1770547- Product: Grove Ultrasonic Sensor
- Ranging Frequency: 100 Hz
- Supply Voltage: 3.3V
- Working current: 40 mA
- Operating Temperature: -10 to 40℃
SKU: 1770547 -
Boards Compatible with Arduino
Seeeduino V4.3 (ATMega328P) Development Board
SKU: 1691810- ATmega328P microcontroller
- Arduino UNO bootloader
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP Header
- Arduino UNO-R3 Shield Compatible
- Micro USB programming and power supply
- 3 on-board Grove connectors
- 3.3/5V system operation power switch
SKU: 1691810 -
ARM Microcontroller
ODYSSEY- STM32MP135D with eMMC, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
ARM MicrocontrollerODYSSEY- STM32MP135D with eMMC, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
SKU: 1682403- Processor: 32-bit Arm Cortex-A7 STM32 MPU
- Operating System: Yocto, Buildroot
- Connectivity: 2x 10/100M Ethernet ports, ETH0 supports WoL function,
-
- 1x USB Type-A,
- 1x CSI 30p FPC Connector,
- 1x LCD 40p FPC Connector,
- 40-pin RPI-compatible GPIO
- Storage: Kingston: 4Gb DRAM, additional TF card holder for up to 32GB, 4GB eMMC
-
- Power Supply: PoE through Ethernet, power supply through Type-C
SKU: 1682403 -
ARM Microcontroller
ODYSSEY – STM32MP135D, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
ARM MicrocontrollerODYSSEY – STM32MP135D, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
SKU: 1682405- Processor: 32-bit Arm Cortex-A7 STM32 MPU
- Operating System: Yocto, Buildroot
- Connectivity: 2x 10/100M Ethernet ports, ETH0 supports WoL function,
- 1x USB Type-A,
- 1x CSI 30p FPC Connector,
- 1x LCD 40p FPC Connector,
- 40-pin RPI-compatible GPIOStorage: Kingston: 4Gb DRAM, additional TF card holder for up to 32GB,
SKU: 1682405 -
Seeed Studio SBC
EdgeBox-RPI-200 – Industrial Edge Controller 4GB RAM, 16GB eMMC, WiFi
SKU: 1529205- CPU Core: 4-core Raspberry Pi CM4
- WiFi: 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac equipped
- Bluetooth: Bluetooth 5.0, BLE equipped
- Cellular: Mini-PCIe support 4G LTE(Quectel EC20/EC25 tested)
- LoRa: Mini-PCIe support LoRaWAN®(Seeed WM1302 tested)
SKU: 1529205 -
-
Temperature & Humidity Sensor
SenseCAP Indicator D1Pro, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator D1Pro, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670441- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution:Â 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
SKU: 1670441 -
Temperature & Humidity Sensor
SenseCAP Indicator D1, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator D1, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670439- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution: 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
- Flash:Â ESP32S3: 8MB/ RP2040: 2MB
- External Storage:Â Support up to 32GB Micro SD Card (not included)
SKU: 1670439 -
Temperature & Humidity Sensor
SenseCAP Indicator + D1S, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator + D1S, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670438- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution: 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
- Flash:Â ESP32S3: 8MB/ RP2040: 2MB
- External Storage:Â Support up to 32GB Micro SD Card (not included)
SKU: 1670438 -
Bluetooth, WIFI and Trans-receiver ICs
Seeed Studio Wio-WM1110 Dev Kit, built-in Semtech LR1110 and Nordic nRF52840
Bluetooth, WIFI and Trans-receiver ICsSeeed Studio Wio-WM1110 Dev Kit, built-in Semtech LR1110 and Nordic nRF52840
SKU: 1670444- LoRa®WAN Protocol: V1.0.4
- Frequency: 863~928MHz
- Sensitivity: -125dBm @125K/SF7 ,-141dBm @125K/SF12
- Output Power: 20dBm max @LoRa®
- Positioning Technology: GNSS(GPS,BeiDou),WiFi
SKU: 1670444 -
Battery Charging Boards
Seeed Studio Lipo Rider Plus (Charger/Booster) – 5V/2.4A USB Type C
SKU: 1670436- Support for shutdown output (IO control/manual switch)
- Onboard charge status indicator LED + Onboard 4-segment power indicator LED
- Ultra-small 2.5cm*4.1cm
- Single-layer layout easy mount.
SKU: 1670436 -
Gas and Dust Sensor
Seeed Studio Grove -Smart Air Quality Sensor-SGP41,MOX gas sensor for VOCs & NOx, Air Purifier, Smart Ventilation
Gas and Dust SensorSeeed Studio Grove -Smart Air Quality Sensor-SGP41,MOX gas sensor for VOCs & NOx, Air Purifier, Smart Ventilation
SKU: 1670432- Long-term Stability: It boasts exceptional long-term stability and durability, making it suitable for continuous monitoring of indoor air quality over extended periods.
- Compact and Flexible:Â It has a 4-pin Grove interface for easy microcontroller connection and supports both 3.3V and 5V power supply, making it versatile for various applications.
- Reliable and Reproducible:Â Sensirion’s state-of-the-art production process guarantees high reproducibility and reliability of the SGP41 module
SKU: 1670432 -
-
Seeed Studio SBC
reComputer Industrial J4012- Fanless Edge AI Device with Jetson Orinâ„¢ NX 16GB module, Aluminum case with passive cooling
Seeed Studio SBCreComputer Industrial J4012- Fanless Edge AI Device with Jetson Orinâ„¢ NX 16GB module, Aluminum case with passive cooling
SKU: 1613215- The product name is reComputer Industrial J4012.
- Power Supply is DC 12V-24V Terminal block 2 pin
- The display is 1*HDMI 2.0 Type A
- Dimensions (W x D x H) are 159mm*155mm*57mm
SKU: 1613215 -
Development Board on Sale, Seeed Studio SBC
reComputer Industrial J3011- Fanless Edge AI Device with Jetson Orin Nano 8GB module, Aluminum case with passive cooling
Development Board on Sale, Seeed Studio SBCreComputer Industrial J3011- Fanless Edge AI Device with Jetson Orin Nano 8GB module, Aluminum case with passive cooling
SKU: 1613213- The product name is reComputer Industrial J3011
- Camera is 2* CSI (2-lane 15pin)
- The display is 1*HDMI 2.0 Type A
SKU: 1613213 -
Development Board on Sale, Seeed Studio SBC
reComputer Industrial J2011- Fanless Edge AI Device with Jetson Xavier NX 8GB module, Aluminum case with passive cooling
Development Board on Sale, Seeed Studio SBCreComputer Industrial J2011- Fanless Edge AI Device with Jetson Xavier NX 8GB module, Aluminum case with passive cooling
SKU: 1613212- Product Name is reComputer Industrial J2011
- Memory Size is 8GB 128-bit LPDDR4x
59.7GB/s - Camera 2* CSI (2-lane 15pin)
- Power Supply is DC 12V-24V Terminal block 2 pin.
SKU: 1613212 -
TFT LCD Displays
reTerminal DM – 10.1” Integrated Device Master, Industrial HMI/PLC/Panel PC/Gateway in One, Raspberry Pi CM4 Core, NodeRed Integrated
TFT LCD DisplaysreTerminal DM – 10.1” Integrated Device Master, Industrial HMI/PLC/Panel PC/Gateway in One, Raspberry Pi CM4 Core, NodeRed Integrated
SKU: 1578725- Model: reTerminal DM – 10.1” Integrated Device Master
- CPU: CM4, Quad-core Cortex-A72 at 1.5GHz
- Power Range: 12~24 DC
- Operating Temperature: -10~50 °C
- Max. Resolution: 1280 x 800
SKU: 1578725 -
-
Seeed Studio SBC
A205E Carrier Board for NVIDIA Jetson Nano/Xavier NX/TX2 NX module
SKU: 1529201- Compatible with NVIDIA Jetson Nano/Xavier NX/TX2 NX modules.
- Includes a carrier board with various connectivity options, such as HDMI, USB, Ethernet, and CSI/DSI interfaces.
- Supports power input options, including 5V DC and POE (Power over Ethernet).
- Features an onboard DC-DC converter for efficient power management.
- Equipped with a variety of I/O interfaces, including GPIO pins, UART, I2C, SPI, and CAN.
- Supports expansion with M.2 Key E and M.2 Key M slots for additional storage and connectivity options.
SKU: 1529201 -
NVIDIA Boards
NVIDIA Jetson AGX Orin 32GB Developer Kit smallest and most powerful AI edge computer
SKU: 1249210- Product: AI edge computer
- AI Performance: 275 TOPS (INT8)
- GPU: NVIDIA Ampere architecture with 2048 NVIDIAn CUDA cores and 64 Tensor Cores
- Max GPU Freq: 1 GHz
- CPU: 12-core Arm Cortex-A78AE v8.2 64-bit CPU 3MB L2 + 6MB L3
- CPU Max Freq: 2 GHz
SKU: 1249210 -
NVIDIA Boards
NVIDIA Jetson AGX Orin 64GB Developer Kit smallest and most powerful AI edge computer
SKU: 1609327- Product: AI edge computer
- AI Performance: 275 TOPS (INT8)
- GPU: 2048-core NVIDIA Ampere architecture GPU with 64 Tensor Cores
- Max GPU Freq: 1.3 GHz
- CPU: 12-core Arm Cortex-A78AE v8.2 64-bit CPU 3MB L2 + 6MB L3
- CPU Max Freq: 2.2 GHz
SKU: 1609327 -
Seeed Studio SBC
EdgeBox RPI 200 -Industrial Edge Controller 2GB RAM 8GB eMMC WiFi
SKU: 1529204- CPU Core: 4-core Raspberry Pi CM4
- WiFi: 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac equipped
- Bluetooth: Bluetooth 5.0, BLE equipped
- Cellular: Mini-PCIe support 4G LTE(Quectel EC20/EC25 tested)
- LoRa: Mini-PCIe support LoRaWAN®(Seeed WM1302 tested)
SKU: 1529204 -
Microcontroller IC
Seeed Studio XIAO ESP32S3 Sense – 2.4GHz Wi-Fi, BLE 5.0, OV2640 camera sensor, digital microphone, battery charge supported, rich Interface, IoT, embedded ML
Microcontroller ICSeeed Studio XIAO ESP32S3 Sense – 2.4GHz Wi-Fi, BLE 5.0, OV2640 camera sensor, digital microphone, battery charge supported, rich Interface, IoT, embedded ML
SKU: 1587654- Item: Seeed Studio XIAO ESP32S3 Sense
- Processor: ESP32-S3R8 , Xtensa LX7 dual-core,32-bit processor that operates at up to 240 MHZ
- Wireless: Complete 2.4GHz Wi-Fi subsystem ,BLE: Bluetooth 5.0, Bluetooth mesh
- Built-in Sensors: oV2640 camera sensor for 1600*1200 ,Digital Microphone
SKU: 1587654 -
-
Seeed Studio SBC
reComputer J4011-Edge AI Device with NVIDIA Jetson Orin NX 8GB Module (Without Adapter)
Seeed Studio SBCreComputer J4011-Edge AI Device with NVIDIA Jetson Orin NX 8GB Module (Without Adapter)
SKU: 1529216- The reComputer J4011 is an Edge AI Device equipped with the powerful NVIDIA Jetson Orinâ„¢ NX 8GB module, making it ideal for high-performance computing applications.
- With 4xUSB 3.2 ports and M.2 Key E & Key M Slots, the reComputer J4011 provides a wide range of connectivity options, allowing users to easily connect and transfer data.
- The device’s aluminum case provides durability and strength, ensuring that it can withstand even the toughest conditions.
- The reComputer J4011 comes with a pre-installed JetPack System with NVIDIA JetPackâ„¢ on a 128GB NVMe SSD, making it ready to use straight out of the box.
SKU: 1529216 -
Seeed Studio SBC
reComputer J3010-Edge AI Device with NVIDIA Jetson Orin Nano 4GB Module
SKU: 1529214- The reComputer J3010-Edge AI Device is a high-performance computing device designed for AI and machine learning applications.
- It features the NVIDIA Jetson Orin Nano 4GB module, which provides excellent processing power for complex computations.
- The device comes with 4xUSB 3.2 ports, allowing for multiple peripheral connections.
- WiFi/BT connectivity is built-in, providing easy access to wireless networks and Bluetooth devices.
- The device has an M.2 Key E and Key M Slot, which allows for expansion with additional hardware.
SKU: 1529214 -
Seeed Studio SBC
reComputer J3011-Edge AI Device with NVIDIA Jetson Orinâ„¢ Nano 8GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPackâ„¢ on 128GB NVMe SSD (Without Adapter)
Seeed Studio SBCreComputer J3011-Edge AI Device with NVIDIA Jetson Orinâ„¢ Nano 8GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPackâ„¢ on 128GB NVMe SSD (Without Adapter)
SKU: 1529215- The reComputer J3011 is an advanced Edge AI device equipped with NVIDIA Jetson Orinâ„¢ Nano 8GB module for high-performance computing.
- It comes with 4 USB 3.2 ports, WiFi/BT, M.2 Key E & Key M Slot, and an aluminum case for durability and connectivity options.
- The device is pre-installed with the JetPack system using NVIDIA JetPackâ„¢ on a 128GB NVMe SSD for seamless performance and convenience.
SKU: 1529215 -
-
Microcontroller IC
Seeed Studio XIAO ESP32S3 – 2.4GHz WiFi, BLE 5.0
SKU: 1569230- Model: XIAO ESP32S3
- Processor: Xtensa LX7 dual-core, 32-bit processor running up to 240 MHz
- Wireless: Complete 2.4GHz WiFi subsystem, BLE: Bluetooth 5.0, Bluetooth mesh
- On-chip Memory: 8M PSRAM & 8MB Flash
- Working Temperature: -40°C ~ 65°C
SKU: 1569230