
WANHAO
Showing all 19 results
-
3D Printer Extruder Kit
1.75mm Direct Extruder Full Kit
SKU: 12082- Nozzle diameter: 0.4mm
- Voltage: 12V.
- Power: 40W.
- Operating Temperature: 200ºC to 280ºC
- Compatible for ABS and PTEG material
- Feed diameter : For 1.75mm Filament (Direct)
- Heater size : 6 x 15mm (DxL).
- 1.75mm Direct Extruder Full Kit
SKU: 12082 -
ABS plus
WANHAO Black ABS 1.75 mm 1 KG Filament for 3D printer – Premium Quality
SKU: 18968- ABS material is tough and sturdy
- Can be used to print commercial grade parts
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Filament Diameter: 1.75mm
- Filament weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Heating bed temperature: 45 ° C – 60 ° C
- Density: 1.01g/cm3
- Melt Flow Index: 5 (10min, 2.16kg)
SKU: 18968 -
PLA plus
WANHAO Black PLA 1.75 mm 1 KG Filament for 3D printer
SKU: 18940- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
SKU: 18940 -
ABS plus
WANHAO Blue ABS 1.75 mm 1 KG Filament for 3D printer – Premium Quality
SKU: 29633- ABS material is tough and sturdy
- Can be used to print commercial grade parts
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Filament Diameter: 1.75mm
- Filament weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Heating bed temperature: 45 ° C – 60 ° C
- Density: 1.01g/cm3
- Melt Flow Index: 5 (10min, 2.16kg)
SKU: 29633 -
PLA plus
WANHAO Brown PLA 1.75 mm 1 kg Filament for 3D printer – Premium Quality
SKU: 67923- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
SKU: 67923 -
DIY 3D Printer Kits
Wanhao Duplicator i3 V2.1 3D Printer (Semi-Assembled)
SKU: 19053- Model: WANHAO i3 V2.1
- Pre-assembled steel frame Prusa i3 you ever had.
- Fully open source enables you to use any most up to date software.
- Extra-long 45mm LM8UU bearings guide the extruder assembly for better lateral tracking.
- Compatible Software: Repetier (Opensource), CURA (Opensource), MatterControl (Opensource), Simplify 3D (Details)
- File Transfer: microSD Card &Â USB
- Frame Color: Steel Frame (Powder Coated Black)
- The Z-Axis endstop switch comes secured to a height-adjustable bracket allowing the freedom to choose between any of your favorite build
SKU: 19053 -
PLA plus
WANHAO Gold color PLA 1.75 mm 1 kg Filament for 3D printer – Premium Quality
SKU: 67830- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
SKU: 67830 -
ABS plus
WANHAO Nuclear Green ABS 1.75 mm 1 KG Filament for 3D printer – Premium Quality
SKU: 29631- ABS material is tough and sturdy
- Can be used to print commercial grade parts
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Filament Diameter: 1.75mm
- Filament weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Heating bed temperature: 45 ° C – 60 ° C
- Density: 1.01g/cm3
- Melt Flow Index: 5 (10min, 2.16kg)
SKU: 29631 -
PLA plus
WANHAO Purple PLA 1.75 mm 1 KG Filament for 3D printer – Premium Quality
SKU: 67778- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
SKU: 67778 -
ABS plus
WANHAO Translucent Red ABS 1.75 mm 1 KG Filament for 3D printer – Premium Quality
SKU: 29636- ABS material is tough and sturdy
- Can be used to print commercial grade parts
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Filament Diameter: 1.75mm
- Filament weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Heating bed temperature: 45 ° C – 60 ° C
- Density: 1.01g/cm3
- Melt Flow Index: 5 (10min, 2.16kg)
SKU: 29636 -
PLA plus
WANHAO Transparent PLA 1.75 mm 1 kg Filament for 3D printer – Premium Quality
SKU: 67933- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
SKU: 67933 -
ABS plus
WANHAO White ABS 1.75 mm 1 KG Filament for 3D Printer – Premium Quality
SKU: 18958- ABS material is tough and sturdy
- Can be used to print commercial grade parts
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Filament Diameter: 1.75mm
- Filament weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Heating bed temperature: 45 ° C – 60 ° C
- Density: 1.01g/cm3
- Melt Flow Index: 5 (10min, 2.16kg)
SKU: 18958 -
PLA plus
WANHAO White PLA 1.75 mm 1 KG Filament for 3D printer – Premium Quality
SKU: 18945- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
SKU: 18945 -
ABS plus
WANHAO Yellow ABS 1.75 m 1 Kg Filament For 3D Printer – Premium Quality
SKU: 29638- ABS material is tough and sturdy
- Can be used to print commercial grade parts
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Filament Diameter: 1.75mm
- Filament weight and Length: 1 kg/ 330 meters ~ 1080 feet
- Heating bed temperature: 45 ° C – 60 ° C
- Density: 1.01g/cm3
- Melt Flow Index: 5 (10min, 2.16kg)
SKU: 29638