-
Arducam Cameras and Accessories
Arducam 1MPx2 Stereo Camera for Raspberry Pi, Nvidia Jetson Nano/Xavier NX, Dual OV9281 Monochrome Global Shutter Camera Module
Arducam Cameras and AccessoriesArducam 1MPx2 Stereo Camera for Raspberry Pi, Nvidia Jetson Nano/Xavier NX, Dual OV9281 Monochrome Global Shutter Camera Module
SKU: 1250095- Brand: Arducam
- model: OV9281
- Product: Stereo Camera for Raspberry Pi
- Pixel Size: 3 μm x 3 μm
- Active Array Size: 1280 x 800
- Optical Size: 1/4 inch
SKU: 1250095 -
Other Servo motor
TowerPro MG958 Digital High Torque Metal Gear Servo Motor – Normal Quality
SKU: 1278743- Operating Voltage: 4.8v-6.6v
- Stall Torque (4.8v): 18.0kg.cm
- Stall Torque (6.6v): 20.0kg.cm
- Servo arms & screws included and fit with Futaba servo arm
- CE & RoHS approved
- Servo case: Alloy case in the middle
- Gear Type: Metal gear
- Bearing: Double ball bearing
SKU: 1278743 -
-
Arducam Cameras and Accessories
Arducam IMX219 Visible Light Fixed Focus Camera Module for Raspberry Pi
Arducam Cameras and AccessoriesArducam IMX219 Visible Light Fixed Focus Camera Module for Raspberry Pi
SKU: 1250096- Sensor: Sony 8MP IMX219 Sensor
- Frame Rates: [email protected], [email protected], [email protected]
- IR sensitivity: Integral IR filter, visible light only
- Focus Type: Motorized focus
- View Angle: 62.2 (Diagonal)
- Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms
SKU: 1250096 -
PVC wire
3 Meter UL1007 26AWG PVC Electronic Wire (Black)
SKU: 1279415The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 1279415 -
-
-
-
USB and SD Memory
M5Stack AtomU ESP32 Development Kit with USB-A
SKU: 1223440- product: Development Kit with USB-A
- Model: ESP32
- ESP32-PICO-D4: 240MHz dual core, 600 DMIPS, 520KB SRAM, 2.4G Wi-Fi
- Support PDM clock frequency 1.0 ~ 3.25MHz
- Standby working current 40.4mA
- Product size: 52 x 20 x 10mm
SKU: 1223440 -
Temperature & Humidity Sensor
PIMORONI MCP9600 Thermocouple Amplifier Breakout
SKU: 1243056- Model: MCP9600
- Product: Thermocouple Amplifier
- Operating Voltage: 3.3V or 5V
- Operating Current: 300 µA (typical)
- I2C interface, with address select via ADDR cuttable trace (0x66 or 0x67)
- Compatible with Arduino
SKU: 1243056 -
-
Raspberry Pi Hats
Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
Raspberry Pi HatsWaveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
SKU: 1254993- LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD: B34, B38, B39, B40, B41
- 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
- 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
- GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication
SKU: 1254993 -
Raspberry Pi Hats
Waveshare RM500U-CN 5G HAT for Raspberry Pi, Quad Antennas LTE-A, Multi Band, 5G/4G/3G
Raspberry Pi HatsWaveshare RM500U-CN 5G HAT for Raspberry Pi, Quad Antennas LTE-A, Multi Band, 5G/4G/3G
SKU: 1254992- 5G NR 3GPP Release 15 NSA/SA operation, Sub-6 GHz
- 5G NR NSA n41, n78, n79
- LTE Category downlink Cat 12, uplink Cat 13
- Operating temperature -30 °C ~ +75 °C
- Supporting RM500U-CN core module, supporting 5G and LTE-A multiple network standards, supporting 5G NSA and SA networking, supporting four major domestic operators
SKU: 1254992 -
-
Raspberry Pi Camera
Waveshare OV9281-120 Mono Camera for Raspberry Pi, Global Shutter, 1MP
SKU: 1254990- Sensor: OV9281
- CMOS size: 1/4 inch
- Camera type: mono
- Pixels: 1MP (1280 × 800)
- Optical Size: 1/4 inch
- Focusing Range: 65mm ~ infinite
- IR Sensitive: Visible light only, build-in 650nm IR cut filter
SKU: 1254990 -
-
Raspberry Pi Hats
Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
Raspberry Pi HatsWaveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
SKU: 1254987- Region / Provider EMEA / APAC (except Japan and CMCC) / Brazil
- Module dimensions 42.0 × 30.0 × 2.3 (mm)
- Operating temperature -30°C ~ +70°C
- LTE-FDD B1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32)
- LTE-TDD B38, B40, B41
- B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41
SKU: 1254987 -
Raspberry Pi Displays
Waveshare 2.8″ Touch Screen Expansion For Raspberry Pi Compute Module 4, Fully Laminated Display, Interface Expander Included
Raspberry Pi DisplaysWaveshare 2.8″ Touch Screen Expansion For Raspberry Pi Compute Module 4, Fully Laminated Display, Interface Expander Included
SKU: 1254986- Power input: 5V
- CM4 socket: suitable for all variants of Compute Module 4
- USB: USB 2.0 × 1
- Connector: MIPI CSI 22PIN 0.5mm camera connector
- Fully laminated touch screen. 2.8″ display with 5-point capacitive touch control, better touch experience from the fully laminated screen, together with 6H toughened glass panel, more safe to use.
- Outline dimensions.
- 1280 x 800 pixels resolution.
SKU: 1254986 -
-
-
Light/color Sensor
PIMORONI AS7262 6-channel Spectral Sensor (Spectrometer) Breakout
SKU: 1243053- Model: AS7262
- Product type: 6-channel Spectral Sensor (Spectrometer)
- Voltage: 3.3V or 5V
- Color: Black
- UART or I²C slave digital Interface
- Programmable LED drivers
- Compatible with Raspberry Pi (Python library)
SKU: 1243053 -
Gas and Dust Sensor
PIMORONI BME688 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity)
Gas and Dust SensorPIMORONI BME688 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity)
SKU: 1243055- Model: BME688
- Product: 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity)
- Operating Voltage: 1.71V to 3.6V
- Operating Current: 3.1µA
- Dimension: 3.0 mm x 3.0 mm x 0.93 mm
SKU: 1243055 -
Converter ICs
PIMORONI ADS1015 +/-24V ADC breakout
SKU: 1243052- Product type: ADC +/-24V
- Operating Voltage: 2.0 V to 5.5 V
- I2C Interface: Four Pin-Selectable Addresses
- Low Current Consumption: 150 μA (Continuous-Conversion Mode)
- 12-Bit Noise-Free Resolution
- Ultra-Small X2QFN Package: 2 mm × 1.5 mm × 0.4 mm
SKU: 1243052 -
-
-
Skip to navigation
Skip to content
