We offer a selection of 3D printer controller from top industry brands to enhance your printing experience. Our most popular items are Displays and Controller boards for building or replacing 3D printers. We feature various versions of Makerbase (MKS) motherboards that are in high demand by the maker community. Browse our selection to find the perfect display and controller for your needs.
3D Printer Display and Controller
Showing all 35 results
-
3D Printer Display and Controller
3D printer 128×64 Smart LCD controller for ramps 1.4
SKU: 12072- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
SKU: 12072 -
3D Printer Display and Controller
Makerbase MKS 1.4 Gen L V1.0- Mega2560 R3 RAMPS 3D Printer Controller Board
3D Printer Display and ControllerMakerbase MKS 1.4 Gen L V1.0- Mega2560 R3 RAMPS 3D Printer Controller Board
SKU: 723872- 2560 and Ramps 1.4 are integrated into the board
- Support 12V-24V power input
- Arduino MEGA compatible Atmega2560 and FT232 processors compatible with all RAMPS class firmware
- Easy DISPLAY + SD-CARD connector, RepRapDiscount SmartController compatible pin header on board
- Easy connect MKS TFT to AUX-1
- 3x temperature ADC connectors for thermistors
- Up 5 motor driver with A4982
- 4x PWM enable mosfet outputs voltage selector switch for MainPower. (Bed, Extruder0, Extruder1, Fans)
- 4 layers PCB, optimize heat dissipation.
SKU: 723872 -
3D Printer Display and Controller
2004 LCD Display RepRapDiscount Smart Controller with Adapter
SKU: 12060- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
SKU: 12060 -
3D Printer Display and Controller
MKS GEN V1.4 3D Printer Control Motherboard with 50cm USB Cable
SKU: 815798- High-quality MOSFET, and better heat dissipation.
- Dedicated power chip, support 12V-24V power input, the voltage converter chip to solve the heat problem Ramps.
- The firmware can use open-source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
SKU: 815798 -
3D Printer Display and Controller
Makerbase MKS TFT24 2.4 inch Mini 3D Printer LCD Splash Screen Touch Screen
3D Printer Display and ControllerMakerbase MKS TFT24 2.4 inch Mini 3D Printer LCD Splash Screen Touch Screen
SKU: 815789- Support power outage recovery, filament outage detection, auto-off after finish printing, etc functions.
- Ability to manual/auto bed leveling.
- Wirelessly remote control, Cloud printing
- Stm32 based processor.
SKU: 815789 -
3D Printer Display and Controller
BIGTREETECH BTT SKR MINI E3 V3.0 32 Bit Control Board for Ender 3/Ender 3 Pro/Ender 5/Ender 5 plus/CR-10
3D Printer Display and ControllerBIGTREETECH BTT SKR MINI E3 V3.0 32 Bit Control Board for Ender 3/Ender 3 Pro/Ender 5/Ender 5 plus/CR-10
SKU: 1604106- Improved heat dissipation signal functions and anti-interference
- Supports BLtouch, filament detection, power off resume, automatic shutdown (PS-ON), etc
- Improved cooling effect
- Multiple functioning
- Easy to operate
- Enhanced stability
SKU: 1604106 -
-
3D Printer Display and Controller
MakerBase MKS Gen_L v2.1 Control Board
SKU: 1632938- Model: MKS Gen_L v2.1
- Voltage supply: 12 – 24V
- Stepper drivers: Up to 5 x A4988, DVR8825, TMC2208, TMC2100, TMC2130 drivers (not included)
- Hot ends: Maximum 2
- Heated bed: Yes
- Controllable fans: Maximum 1
- Compatible display: LCD 2004, LCD 12864 or MKS touch screens
- Endstops: Min and Max for X, Y and Z axis
SKU: 1632938 -
3D Printer Display and Controller
GT2560 Mainboard, Mega2560
SKU: 112131012V 12A and 12V 5A power supply
Extended LCD & SD card interface
Six endstop input (X-MIN, Y-MIN, Z-MIN Y-MAX, X-MAX, Z-MAX)
Three inputs for thermistor (TEMP1, TEMP2 and TEMP3)
Three input for 12V cooling fan
One PWM outputSKU: 1121310 -
3D Printer Display and Controller
BIGTREETECH BTT SKR V1.4 Control Board for 3D Printer
SKU: 1604108- Â Adopt high-performance MOSFET tube, better heat dissipation effect
- The use of pluggable fuses makes the replacement process easier
- Reserve BLTouch interface SERVOS and Probe for easy use of BL Touch
- Â RGB light bar supporting Neopixel scheme
-  Use the power selection design to separate the USB power supply from the switching power supply, effectively avoiding short circuit Causes the computer’s USB port to be burned
SKU: 1604108 -
3D Printer Display and Controller
BIGTREETECH BTT SKR Pico V1.0 Control Board Compatible with Raspberry PI for Voron V0
3D Printer Display and ControllerBIGTREETECH BTT SKR Pico V1.0 Control Board Compatible with Raspberry PI for Voron V0
SKU: 1604113- Â RP2040 with 2MB external flash
- Designed specifically for use with Klipper
- Proximity switch input with jumper selectable external pull up
- Dedicated laser port
- PWM fan ports with flyback protection
- Thermistor short circuit protection inputs
- USB-C interface
- 5V output for powering an external Raspberry Pi
- Same size and hole location as an RPI, allowing stacking
SKU: 1604113 -
-
-
3D Printer Display and Controller
BIGTREETECH BTT Manta M4P Control Board for 3D Printer
SKU: 1611652- Installed with 32-bit 64MHz ARM Cortex-M0+ STM32G0BORE chip, more stable and faster.
- Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also available.
- TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.
- It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.
- 3 different voltages for fan connectors (5V, 12V and 24V)
SKU: 1611652 -
3D Printer Display and Controller
BIGTREETECH BTT SKR MINI E3 V2.0 32 Bit Control Board Integrated TMC2209 UART For Ender 3 3D Printer
3D Printer Display and ControllerBIGTREETECH BTT SKR MINI E3 V2.0 32 Bit Control Board Integrated TMC2209 UART For Ender 3 3D Printer
SKU: 1604105- Microprocessor: ARM Cortex-M3 STM32F103RCT6 chip with 32-bit CPU 72MHZ
- Input voltage: 12/24V
- Logic voltage: 3.3V
- Controller: TMC2209 with UART mode
- Connections for the two Z axis motors
SKU: 1604105 -
-
-
3D Printer Display and Controller
BIGTREETECH BTT SKR V1.4 Turbo Control Board for 3D Printer
SKU: 1604109- Reserved closed-loop drive interface, eliminating the trouble of plug-in transfer module;
- Â Dual Z-axis interface, eliminating the trouble of external drive expansion module;
- The thermistor interface is protected by a bile capacitor pressure sensitive resistor to enhance the resistance of the interface;
- More fan interfaces: 1 digitally controlled fan, 3 normally open fans;
- Â External DC5V power module can be plugged in to supply power to TFT screen, BLtouch, Neopixel.
SKU: 1604109 -
3D Printer Display and Controller
BIGTREETECH BTT Manta M8P Control Board
SKU: 1611654- Adopt 32-bit 64MHz ARM Cortex-M0+ series STM32G0B1VET6 as the main control chip;
- The output current of the chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi;
- There is a BOOT button reserved on the motherboard, users can update the bootloader through DFU
- The thermistor part includes a protection circuit that protects the main control chip from the possibility of burning caused by leakage of the heated bed or heater cartridge
- The thermistor can select the pull-up resistor value through the jumper, in this way, it supports PT1000 without an external module, which is convenient for customers to DIY
SKU: 1611654 -
3D Printer Display and Controller
BIGTREETECH BTT SKR PRO V1.2 32 Bit Control Board
SKU: 1604107- Supports Resume Printing While Power Off , Filament Break Detection, Automatic Shutdown After Printing and so on
- High performance MOSFET tube, better heat dissipation effect
- Using removable fuse makes the replacement process easier
- Reserved extended port SERVOS and Probe to support BL Touch
- Supports RGB light bar
SKU: 1604107 -
3D Printer Display and Controller
BIGTREETECH BTT Manta M5P Control Board
SKU: 1611653- Installed with 32-bit 64MHz ARM Cortex-M0+ STM32G0B1RET6 chip, more stable and faster.
- It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.
- TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.
- Selectable CNC fan voltage, 5V/12V/24V
SKU: 1611653 -
-
3D Printer Display and Controller
BIGTREETECH BTT Octopus Pro V1.0.1 (H723) 3D Printer Controller Board
3D Printer Display and ControllerBIGTREETECH BTT Octopus Pro V1.0.1 (H723) 3D Printer Controller Board
SKU: 1604103- Brand: BIGTREETECH
- MCU: STM32H723ZET6
- Support 60V Input: Supports up to 8 3D printer motherboards with a maximum 60V stepper motor. The motor drive power supply supports up to 60V input (only for the motor drive power supply).
- PCB Material
- Flash: 1MB
SKU: 1604103 -
3D Printer Display and Controller
BIGTREETECH BTT Octopus Max EZ for 3D Printer
SKU: 1604095- Onboard BOOT button to enable DFU mode to update the bootloader
- The thermistor circuit is protected to prevent MCU damage from shorted heated bed and heater cartridge connections
- Selectable voltage (24V, 12V, 5V) for CNC fan, no more need for external stepdown thus preventing board damage from user error
- Upgraded with eFuse protection, which response faster with strong protection, effectively protecting the motherboard from being damaged caused by short circuits, over-current, electric spark, etc
- Support power loss recovery, filament runout sensor, CAN, auto power-off, BL Touch, RGB, etc
- Replaceable fuse for easy maintenance
SKU: 1604095 -
3D Printer Display and Controller
BIGTREETECH BTT Octopus Pro V1.0.1 (F429)
SKU: 1604101- MCU: 180MHz ARM Cortex-M4 STM32F429
- Providing enough power to realize even the most demanding applications and ideas
- Supports up to 8 3D printer motherboards with a maximum 60V stepper motor
- The motor drive power supply supports up to 60V input (only for the motor drive power supply)
SKU: 1604101 -
3D Printer Display and Controller
BIGTREETECH BTT SKR 3 EZ Control Board Mainboard for 3D Printer
SKU: 1604097- Support all versions of our company’s serial screen, SPI screen and LCD screen.
- Upgrade the configuration firmware through an SD card, the operation is simple, convenient and efficient.
- On-board DIAG function pins can be used by simply plugging and unplugging the jumper cap.
- High-performance MOSFETs are used to reduce heat generation.
- Adopt a replaceable fuse for easy replacement.
SKU: 1604097
