The heat bed of a 3D printer is a crucial component that ensures proper adhesion of the printing material to the build surface. It is a flat, conductive material such as aluminum or glass that is heated using a heating element to provide a consistent and stable temperature across the build surface.
Additionally, a level sensor is an essential accessory that helps balance the heat bed and other components like drivers and springs to produce high-quality prints and ensure a smooth and efficient printing process.
Check out our Online 3D printing service with doorstep delivery across INDIA. See More
3D Printer Heatbed and Accessories
Showing 1–48 of 53 results
-
3D Printer Heatbed and Accessories
220 x 220 x 0.5mm Frosted Heated Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer
3D Printer Heatbed and Accessories220 x 220 x 0.5mm Frosted Heated Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer
SKU: 141358- Suitable for PLA, ABS, HIPS, PETG, TPE filament, nylon, PC, RETT material. Usage for the Anet A6 A8 3D Printer
- Provides extra adhesive force between filament and heating board.
- Effectively prevents deformation of ABS, PLA filament.
- Simple design, fast installation.
- Dull polish treated surface, reusable 3D printer accessory.
- Installs much easier than masking tape or films typically used and with fewer chances of air bubbles
- Protects build plate
SKU: 141358 -
-
-
3D Printer Heatbed and Accessories
Sharp Edge Scraper 2 Inches for 3D Printers
SKU: 52264- Stainless steel blade is rustproof and strong.
- The rubber handle is comfortable and will offer a non-slip grip.
- The non-slip handle also features a ribbed thumb rest for ease of use during scraping.
- The rubber handle offers both comfort and a non-slip grip.
SKU: 52264 -
3D Printer Heatbed and Accessories
RepRap MK2B 3D printers Dual Power PCB Heat Bed
SKU: 12024- 2 layer, 35μm copper
- Copper plated holes
- The resistance between 1.0 and 1.2 ohm
- Active heated area: 200 mm x 200 mm.
- 209 mm center-to-center mounting holes (outside the active area).
- Support 12V, 24V power.
- Double-sided, the other side is no wiring, heating uniformity, smooth printing.
- Regardless of the positive and negative terminal, you can free wiring.
SKU: 12024 -
3D Printer Heatbed and Accessories
3D Printer Build Platform Glass Retainer Heated Bed Clip- 4Pcs
SKU: 52577- 100% brand new and high quality.
- Material: Stainless Steel
- Made of stainless steel material, sturdy and durable, long time to use.
- Suitable for Ultimaker 2 glass heated bed.
- Great replacements for 3D printer parts.
SKU: 52577 -
3D Printer Heatbed and Accessories
RepRap MK2B 3D printers Dual Power PCB Heat Bed With 14AWG Cable
SKU: 51686- Dimensions (Outer): 214 x 214 mm.
- Dimensions (Heat Bed): 200 x 200 mm.
- 2 layer, 35μm copper.
- Copper Plated Holes
- Very good in combination with RUMBA or Taurino Power.
- Power Input: 12V / 24V DC
- Weight: 190 gm.
SKU: 51686 -
-
3D Printer Heatbed and Accessories
Heated Bed Sticker for 3D Printer Build Plate With Adhesive Backing
3D Printer Heatbed and AccessoriesHeated Bed Sticker for 3D Printer Build Plate With Adhesive Backing
SKU: 890169- Provides Extra Adhesive Force Between Filament And Heating Bed.
- Simple Design, Fast Installation.
- Dull Polish Treated Surface, Reusable 3D Printer Accessory.
- Compatible With Bed Size 214*214mm
SKU: 890169 -
-
3D Printer Heatbed and Accessories
MKS MOSFET Heating Controller for 3D Printer heat Bed/Extruder
SKU: 354349- The superior performance of MOSFET (Max 280A).
- An extra-large heat sink, the maximum current can be up to 30A or more.
- Can use hot-bed output signal of Ramp1.4 and MKS series to control.
- Can use the digital signal of 5-24v to control.
SKU: 354349 -
3D Printer Heatbed and Accessories
3D printer parts heatingcontroller, MKS MOS25 V1.0, for heat bed extruder MOS, module support big current, 25A
3D Printer Heatbed and Accessories3D printer parts heatingcontroller, MKS MOS25 V1.0, for heat bed extruder MOS, module support big current, 25A
SKU: 1121241- The superior performance of MOSFET (Max 280A).
- An extra-large heat sink, the maximum current can be up to 30A or more.
- Can use hot-bed output signal of Ramp1.4 and MKS series to control.
- Can use the digital signal of 5-24v to control.
SKU: 1121241 -
3D Printer Heatbed and Accessories
Round Heated Bed Sticker for 3D Printer Build Plate With Adhesive Backing
3D Printer Heatbed and AccessoriesRound Heated Bed Sticker for 3D Printer Build Plate With Adhesive Backing
SKU: 890236- Provides Extra Adhesive Force Between Filament And Heating Bed.
- Simple Design, Fast Installation.
- Dull Polish Treated Surface, Reusable 3D Printer Accessory.
- Compatible With Build Plate of Diameter 220mm
SKU: 890236 -
-
-
3D Printer Heatbed and Accessories
EasyMech 16 Pcs Set of 1 mm SS Heat Bed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L12 to L30mm
3D Printer Heatbed and AccessoriesEasyMech 16 Pcs Set of 1 mm SS Heat Bed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L12 to L30mm
SKU: 990628- Material: Stainless Steel
- Outer Diameter (OD): 7.4
- Inner Diameter (ID): 5.4
- Length (MM) : 12 to 30 (see Package Includes)
- Quantity: 16
SKU: 990628 -
3D Printer Heatbed and Accessories
Two Trees – Honeycomb Working 400×400 Panel Set
SKU: 1645145- 400mm x 400mm Workbench Panel Set
- Large, applicable to various laser machines, including TS2 / TTS / TT-5.5s / TT-50.
- Used to place materials to be cut or engraved, working in combination with the aluminum panel to protect your desk.
- Made of iron and aluminum, stable, firm, durable, and rustproof.
SKU: 1645145 -
3D Printer Heatbed and Accessories
EasyMech 20 Pcs Set of 0.5 mm SS Heat Bed Spacer Compression Spring for 3D Printer OD 6mm X ID 5mm X L12 to L30mm
3D Printer Heatbed and AccessoriesEasyMech 20 Pcs Set of 0.5 mm SS Heat Bed Spacer Compression Spring for 3D Printer OD 6mm X ID 5mm X L12 to L30mm
SKU: 990627- Material: Stainless Steel
- Outer Diameter (OD): 6
- Inner Diameter (ID): 5
- Length (MM) : 12 to 30 (see Package Includes)
- Quantity: 20
SKU: 990627 -
3D Printer Heatbed and Accessories
Two Trees – Honeycomb Working 500×500 Panel Set
SKU: 1645146- 500mm x 500mm Workbench Panel Set
- Large, applicable to various laser machines, including TS2 / TTS / TT-5.5s / TT-50.
- Used to place materials to be cut or engraved, working in combination with the aluminum panel to protect your desk.
- Made of iron and aluminum, stable, firm, durable, and rustproof.
SKU: 1645146 -