Categories

Robocon Motor Drivers

  • Sabertooth Dual 32A Motor Driver

    Product Code(SKU): 4702
     9,439.00 (inc GST)
    1. 32A continuous, 64A peak per channel
    2. 6-30V nominal, 33.6V absolute maximum
    3. Synchronous regenerative drive
    4. Ultrasonic 30 kHz switching frequency
    5. Thermal and overcurrent protection
    6. Battery protection mode
    7. USB control and monitoring
    8. USB serial converter mode for Kangaroo x2
    9. Configurable current limiting
    10. Custom user modes
    11. 12-bit motor outputs
    Add to cart
  • Cytron 30Amp DC Motor Driver (Peak 80Amp) MD30C R2

    Product Code(SKU): 2774
     3,045.00 (inc GST)
    1. Bi-directional control of 1 brushed DC motor.
    2. Motor Voltage: 5V – 25V.
    3. Maximum Current: 80A peak (1 second), 30A continuously.
    4. Reverse polarity protection.
    5. 3.3V and 5V logic level input.
    6. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
    Add to cart
  • SmartElex 15S DC Motor Driver 15A (30A Peak)

    Product Code(SKU): 47993
     750.00 (inc GST)
    1. Supply Voltage: 6.8-30 VDC.
    2. Continuous Current: 15 Amp.
    3. PWM Frequency: 20 KHz.
    4. Max Peak current: 30 Amp(For 10 Seconds).
    5. One brushed DC motor Bidirectional control.
    Add to cart
  • Cytron Dual channel 10A Motor Driver UNO Robot Controller

    Product Code(SKU): 49866
     2,510.00 (inc GST)
    1. Onboard 1A (maximum) 5V voltage regulator.
    2. Onboard 500mA (maximum) 3.3V voltage regulator.
    3. 0-5V digital outputs with 3.3V compatible inputs.
    4. 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver)
    5. 6 Analog Inputs (Can be digital I/O too).
    6. Maximum current up to 10A continuous and 30A Peak.
    7. ISP 6-pin Header.
    8. 32k Flash Memory.
    9. 16MHz Clock Speed.
    10. R3 Shield Compatible.
    Add to cart
  • Sabertooth Dual 25A Motor Driver

    Product Code(SKU): 4698
     9,082.00 (inc GST)
    1. 25A continuous, 50A peak per channel
      6-30V nominal, 33.6V absolute maximum
    2. Synchronous regenerative drive
    3. Ultra-sonic switching frequency
    4. Thermal and overcurrent protection
    5. Lithium protection mode
    6. Input modes: Analog, R/C, simplified serial, packetized serial
    Add to cart
  • Cytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C

    Product Code(SKU): 2777
     1,039.00 (inc GST)

     

    1. Bi-directional control of 1 brushed DC motor.
    2. Support motor voltage ranges from  5V to 25V.
    3. Maximum current up to 13A continuous and 30A peak (10 seconds).
    4. 3.3V and 5V logic level input.
    5. Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
    6. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
    Read more
  • SmartElex 15D Dual Channel DC Motor Driver

    Product Code(SKU): 55900
     1,449.00 (inc GST)
    1. Supply Voltage: 6.8-30 VDC.
    2. Continuous Current: 13 Amp.
    3. PWM Frequency: 20 KHz.
    4. Current limiting at 30A.
    5. 3V and 5V logic level input.
    Add to cart
  • 10A Motor Driver Shield – MD10

    Product Code(SKU): 3408
     1,564.00 (inc GST)
    1. Bi-directional control of 1 brushed DC motor.
    2. Support motor voltage ranges from 7V to 25V, .
    3. Maximum current up to 10A continuous and 15A peak (10 seconds).
    4. 3.3V and 5V logic level input.
    5. Speed control PWM frequency up to 10KHz.
    Add to cart

Shopping Cart
There are no products in the cart!
0