Arduino shields are boards that can be plugged on top of an Arduino PCB to extend its capabilities. There are many different types of shields available, each with its own unique functionality. Some popular shields include the Ethernet shield, the WiFi shield, and the LCD shield.
Arduino shields are easy to mount and cheap to produce, making them a great way to add new features to your Arduino projects. We carry a huge collection of Arduino shields, so you’re sure to find the one you’re looking for.
Shield for Arduino
Showing 1–48 of 60 results
-
-
Shield for Arduino
Arduino Opta WiFi AFX00002
SKU: 1723289- Input    : 8x configurable digital / analog (0-10V) input
- Processor: STM32H747XI Dual ARM® Cortex®:
Cortex -M7 core up to 480 MHz
Cortex -M4 core up to 240 MHz - Connectivity: Support 10/100 Ethernet (TCP/IP or Modbus TCP)
USB-C
Wi-Fi + Bluetooth® Low Energy
RS485 half duplex
SKU: 1723289 -
Shield for Arduino
ELECROW ELE Can-Bus Shield-V1.5
SKU: 1855133- Model: ELECROW ELE Can-Bus Shield-V1.5
- CAN-BUS is a common industrial bus
- long travel distance
- Medium communication speed and high reliability
- Widely used as the automotive diagnostic bus
- Also commonly used on modern machine tools
SKU: 1855133 -
Shield for Arduino
ESP8266 Web Server Serial WiFi Extension Board Shield ESP-13
SKU: 975741- Wifi protocol: 802.11 b/g/n
- STA/AP: work mode
- Integrated TCP/IP stack: support one socket
- Work as TCP/UDP Server or Client mode
- Serial port baud rate: 1200/2400/4800/9600/19200/38400/57600/74800/ 115200 bps
SKU: 975741 -
LORA Module, Shield for Arduino
Wireless Transmitter 915Mhz, Lora Shield for Leonardo,, UNO, Mega2560,, Duemilanove, Due
LORA Module, Shield for ArduinoWireless Transmitter 915Mhz, Lora Shield for Leonardo,, UNO, Mega2560,, Duemilanove, Due
SKU: 1121438- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
SKU: 1121438 -
Shield for Arduino
XBee Adapter Shield Breakout Board for XBee Module
SKU: 1150793- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket
SKU: 1150793 -
Shield for Arduino
3D Printer CNC Shield V4 Expansion Board For Arduino
SKU: 43461- Worked with Arduino nano.
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
- Released the I2C interface, you can connect to the LCD I2C or another I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
SKU: 43461 -
Shield for Arduino
Arduino Nano PRATHAM 1.0 Development Board
SKU: 567563- On-board ON/OFF switch and power LED
- Onboard Voltage Regulator for stable power supply
- Arduino Nano compatible (direct plug-in for Arduino Nano board)
- On-board direct plug-in for 16X2 Liquid Crystal Display with contrast adjustment
- On-board L293D Motor Driver chipset
- I2C communication pins available for IMU Sensor
- Pin header to connect Line Follower Sensor (up to an array of 6) with power pins
SKU: 567563 -
-
Shield for Arduino
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Shield for ArduinoCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU: 12202- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: 12202 -
-
Shield for Arduino
Colorduino LED RGB Dot Matrix Driver Board with 5mm 8*8 RGB LED for Arduino
SKU: 330167- 8bits colors support with 6bits correction for each color in every dots
- Hardware 16MHz PWM support
- 24 constant current channels of 100mA each
- Current Consumption(Except LED matrix): 20mA typical (40mA maximum)
- Drive current(Every channel):Â 500mA
- Drive current(Every dot) :Â 58mA
SKU: 330167 -
Shield for Arduino
Cytron Easy MP3 Shield
SKU: 7982-
Onboard high-quality MP3 decoder.
-
Onboard dual channel/Stereo 3W differential audio amplifier for an external speaker.
- A MicroSD status LED.
-
Onboard stereo 3.5mm audio jack socket for earphones.
-
Onboard microSD socket for MP3 audio files storage.
-
The interface from Arduino, UART, selectable to use soft serial.
-
Stackable side headers.
- Supply voltage: 5V.
SKU: 7982 -
-
Shield for Arduino
Cytron XBee Shield
SKU: 7981-
Mounts directly onto your Arduino
-
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
-
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
-
Extra 0.1″ spaced prototyping holes
-
Reset button brought out to shield
-
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
SKU: 7981 -
-
Shield for Arduino
Data Logger module Logging Shield data Recorder Shield
SKU: 12191- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
SKU: 12191 -
-
Shield for Arduino
ESP8266 Serial WiFi Expansion Board Module for Arduino
SKU: 815831- 32-bit RISC architecture
- The processor can operate at 80MHz / 160MHz
- 32MB flash memory
- 64kB for instructions
- 96kB for data
- Standard native WiFi 802.11b / g / n
- Operates in AP, Station or AP + Station mode
SKU: 815831 -
Shield for Arduino
Ethernet W5100 R3 Ethernet & SD Shield for Arduino
SKU: 815832- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
SKU: 815832 -
Shield for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
SKU: 12205- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
SKU: 12205 -
Shield for Arduino
HACK AF L293D Motor Driver/Servo Shield for Arduino Nano
SKU: 143257- Pin compatible with Adafruit Motor Shield
- Pin header to connect sensors and actuators.
- 4 H-Bridges L293D chipset.
- Surg Current Protection for IC L293D.
- Onboard On/Off Switch.
- Drive 4 bi-directional DC motors
- Drive 2 Servo motors (unipolar or bipolar)
- On-board slot to connect HC-05/HC-06 Bluetooth modules for Wireless control via Smartphone
SKU: 143257 -
-
-
Shield for Arduino
L293D Motor Driver/Servo Shield for Arduino
SKU: 9736- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: 9736 -
-
LORA Module, Shield for Arduino
LoRa Shield for Arduino V95
SKU: 127766- Compatible with 3.3v or 5v I/O Arduino Board.
- Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in a factory)
- Low power consumption
- Compatible with Arduino Leonardo, Uno, Mega, DUE
- External Antenna via I-Pex connector
SKU: 127766 -
Shield for Arduino
MINI USB Host Shield 2.0 ADK
SKU: 618157- Only supports 3.3V / 8M / 328 Promini and 3.3V FTDI.
- Mini USB host allows (Pro mini version only) to achieve USB HOST function, also USB HUB function.
- Provided compiled APK installation package and ADK source files compatible with hardware Mega 1280.
- Support For Google Android ADK function
- Support For Android phone type
SKU: 618157 -
-
-
-
-
-
-
Shield for Arduino
Proto Screw Shield 1.0 For Arduino Uno
SKU: 31244- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
SKU: 31244 -
Shield for Arduino
Prototype Shield V3.0 For Arduino Mega with breadboard
SKU: 28262- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
SKU: 28262 -
Shield for Arduino
PS2 Controller Starter Kit
SKU: 7438- Stable 5V powered, low current consumption, less than 150mA.
- 1 standard PS2 controller socket.
- Communicate with host microcontroller through 5V TTLÂ UART.
- Simple inquiry command and button status feedback for the host process.
- Vibrator motor is controllable.
- Wired or wireless PS2 controller is fully compatible.
- A small LED as the indicator for communication between SKPS and PS2 controller.
SKU: 7438 -
-
Shield for Arduino
SeeedStudio Grove Beginner Kit for Arduino
SKU: 601890- Operating voltage: 5 V
- Tutorials for guidance
- Fully compatible with Arduino UNO
- High performance, low power 8 bit ATmega328 MU microcontroller
- Serial converter CP2102N chip (to communicate the Seeeduino with a computer by using a micro-USB cable)
- 2 on-board Grove connectors
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog inputs
- ISP header
- Arduino UNO-R3 shield compatible
- Micro USB programming and power supply
- Supports Windows, Mac OS, and Linux
SKU: 601890