Arduino Board is most popular amongst student s and the beginner who want to start from the basics of electronics, programming, and coding. We Robu.in selling a variety of Arduino boards including Arduino Uno, mini, Nano, Mega2560, Wemos, Lilypad & Due.
Arduino is an open-source platform used for building electronics projects. Unlike most previous programmable circuit boards, the Arduino does not need a separate piece of hardware (called a programmer) in order to load new code onto the board you can simply use a USB cable.
Boards Compatible with Arduino
Showing 1–48 of 64 results
-
Boards Compatible with Arduino
Adafruit ESP32 Feather V2 – 8MB Flash + 2 MB PSRAM – STEMMA QT
SKU: 1383196- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual-mode Bluetooth (classic and BLE)
- On-board PCB antenna
- Ultra-low noise analog amplifier
SKU: 1383196 -
-
-
-
Boards Compatible with Arduino
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
SKU: 1104417- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
SKU: 1104417 -
Boards Compatible with Arduino
Adafruit Feather RP2040
SKU: 1104419- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
SKU: 1104419 -
Boards Compatible with Arduino
Adafruit Metro Mini 328 – Arduino-Compatible – 5V 16MHz
SKU: 1178444- 5V logic with 3.3V compatible inputs can be converted to a 3.3V logic operation
- 32KB Flash Memory – 0.5K for bootloader
- Four indicator LEDs
- Easy reprogramming
- 31.5KB available after bootloading
- 16MHz Clock Speed
SKU: 1178444 -
-
-
Boards Compatible with Arduino
Adafruit Trinket M0 – for use with CircuitPython & Arduino IDE
SKU: 1383207- Same size, form factor, and pinout as a classic Trinket
- Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
- 256KB Flash – 32x as much as 8 KB on ATtiny85
- 32 KB RAM – 64x as much as 512 bytes on ATtiny85
- 48 MHz 32-bit processor – 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
- Native USB supported by every OS
SKU: 1383207 -
Boards Compatible with Arduino
Adiy Uno DIP R3 – Compatible CH340C
SKU: 1593946- Microcontroller: ATmega328
- Operating Voltage: 5V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB of which 0.5 KB is used by the bootloader
SKU: 1593946 -
Boards Compatible with Arduino
DFRduino Mega2560 (Arduino Mega 2560 R3 Compatible)
SKU: 1429646- Controller Model: ATmega2560
- Operating Voltage: 5V
- Input Voltage(VIN): 3-16V(20V max)
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Inputs: 16 I/O
- FLASH: 256 KB (of which 4 KB is used by the bootloader)
- Frequency: 16MHz
SKU: 1429646 -
-
-
-
Boards Compatible with Arduino
DFRobot Gravity: I2C 4-20mA DAC Module (Arduino Compatible)
SKU: 1551173- Chip Type: GP8302
- Input Signal Range: 12Bit, 0x000-0xFFF (0-25mA)
- Input I2C Signal High Level: 2.7V-5V
- Power Supply: 18V-24V (24V recommended)
- Accuracy: 0.5% before calibration, 0.2% after calibration
SKU: 1551173 -
Boards Compatible with Arduino
STMICROELECTRONICS Development Board, STM32 Nucleo-64 MCU, Arduino Uno V3 Connectivity, Flexible Power Supply
Boards Compatible with ArduinoSTMICROELECTRONICS Development Board, STM32 Nucleo-64 MCU, Arduino Uno V3 Connectivity, Flexible Power Supply
SKU: 1470147- Model: STM32 Nucleo-64 MCU
- STM32 microcontroller with LQFP64 package
- USB re-enumeration capability – Three different interfaces
- Voltage: 3.3V, 5V, 7 – 12V
- Applications: Embedded Design & Development
SKU: 1470147 -
Boards Compatible with Arduino
STMICROELECTRONICS Development Board, STM32F091RC MCU, mbed Enabled, Arduino Uno V3 and ST Morpho Connectivity
Boards Compatible with ArduinoSTMICROELECTRONICS Development Board, STM32F091RC MCU, mbed Enabled, Arduino Uno V3 and ST Morpho Connectivity
SKU: 1470135- Model: STM32F091RC MCU
- Flexible board power supply: USB VBUS or external source (3.3 V, 5 V, 7 – 12 V)
- Supported by wide choice of Integrated Development Environments (IDEs) including IAR , Keil , GCC-based IDEs
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector.
- Low power consumption
SKU: 1470135 -
Boards Compatible with Arduino
STMICROELECTRONICS Development Board, STM32L476RG MCU, On-Board STLINK/V2-1, Arduino & ST Morpho Connectivity
Boards Compatible with ArduinoSTMICROELECTRONICS Development Board, STM32L476RG MCU, On-Board STLINK/V2-1, Arduino & ST Morpho Connectivity
SKU: 1470146- Model: STM32 Nucleo-64 boards
- Crystal oscillator: 32.768 kHz
- Board-specific features: 24 MHz or 48 MHz HSE
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration
SKU: 1470146 -
-
Boards Compatible with Arduino
Unsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
Boards Compatible with ArduinoUnsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
SKU: 1150789- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
SKU: 1150789 -
Boards Compatible with Arduino, Raspberry Pi Hats
Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
Boards Compatible with Arduino, Raspberry Pi HatsWaveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
SKU: 1231450- Power Input: 5V
- CM4 Socket: suitable for all variants of Compute Module 4
- Connector: M.2 M KEY slot, for connecting communication module or NVME SSD; Arduino compatible GPIO header
- USB: USB 2.0 Type A x 1
- Camera: MIPI CSI-2 × 1 (15pin 1.0mm FPC connector)
SKU: 1231450 -
Boards Compatible with Arduino
Atmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
-29%Boards Compatible with ArduinoAtmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
SKU: 48077- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
SKU: 48077 -
Boards Compatible with Arduino
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
SKU: 43195- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: 43195 -
Boards Compatible with Arduino
CH376S USB Module U Disk Read Write Module
SKU: 815821- Supply Voltage: 5V
- Internal curing CH376S chip FAT file system, file operations simple and fast
- Support including USB thumb drives, USB hard drives, USB flash drives, and USB storage devices, USB card reader
- Compatible with CH372, host compatible with CH375
SKU: 815821 -
Boards Compatible with Arduino
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
SKU: 56432- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
SKU: 56432 -
Boards Compatible with Arduino
Cytron Uno Board ATmega328 Microcontroller (Arduino Compatible)
SKU: 766269- A better version of Arduino Uno
- SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader
- USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable)
- Input voltage: DC7-15V
- 14 Digital I/O Pins (6 PWM outputs)
SKU: 766269 -
Boards Compatible with Arduino
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
-15%Boards Compatible with ArduinoDue AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
SKU: 31273- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: 31273 -
Boards Compatible with Arduino, Wearable Electronic
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
Boards Compatible with Arduino, Wearable ElectronicLilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
SKU: 28446- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: 28446 -
Boards Compatible with Arduino
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
-14%Boards Compatible with ArduinoMega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
SKU: 110695It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
SKU: 110695 -
Boards Compatible with Arduino
Mega 2560 Atmega2560-16au compatible with Arduino + Cable + Transparent acrylic case
-31%Boards Compatible with ArduinoMega 2560 Atmega2560-16au compatible with Arduino + Cable + Transparent acrylic case
SKU: 48069- Programmer: Atmel
- ATmega2560 microcontroller.
- 54 digital input/output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
SKU: 48069 -
Boards Compatible with Arduino
Mega R3 Android Accessory Development Kit (ADK) + USB Cable
SKU: 28435- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
SKU: 28435 -
Boards Compatible with Arduino
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board
SKU: 699585- The board is compatible with Mega 2560.
- excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
SKU: 699585 -
-
Boards Compatible with Arduino
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
-30%Boards Compatible with ArduinoNano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
SKU: 30888- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: 30888 -
Boards Compatible with Arduino
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
-28%Boards Compatible with ArduinoNano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
SKU: 16906- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 16906 -
Boards Compatible with Arduino
Nano R3 W/O USB Cable Compatible with Arduino (Soldered)
SKU: 1588183- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel MEGA328PB-U (Nano)
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 1588183 -
Boards Compatible with Arduino
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
-62%Boards Compatible with ArduinoNano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
SKU: 42940- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 42940 -
Boards Compatible with Arduino
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
Boards Compatible with ArduinoPro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
SKU: 110787- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
SKU: 110787 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
SKU: 31249- Microcontroller: ATmega328
- Circuit Operating Voltage: 3.3V
- Clock frequency: 8MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 31249 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M (Official Version)
SKU: 11458- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 11458 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Black- Standard version
SKU: 498153- ATmega328 running at 16MHz with external resonator (0.5% tolerance).
- 100% Arduino compatible board.
- Max Output Current: 150mA.
- 0.8mm Thin PCB.
- USB connection off-board.
- Supports auto-reset.
- Onboard Power and Status LEDs.
SKU: 498153 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
SKU: 409791- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
SKU: 409791