Battery Protection Board
-
TP5100 4.2v and 8.4v Dual One/Two Battery Protection Board
SKU: 62296₹ 190.00(inc GST)
₹ 161.02 (+18% GST extra)
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
-
Double 8.4v / 4.2v lithium rechargeable single .
-
Programmable charge current. 0. 1A-2A .
-
Programmable steady precharge current 10% -100%.
-
Wide operating voltage, maximum reach I8V.
-
Red and green LED charge status indicator.
-
Chip temperature protection, overcurrent protection, under voltage protection.
-
Battery temperature protection, reverse battery shutdown, short circuit protection.
-
Switching frequency 400Khz, usable inductance 20uH and more.
-
TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB
SKU: 53264₹ 90.00(inc GST)
₹ 76.27 (+18% GST extra)
- Input interface: Mini USB.
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection:Â 2.5 V
-
TP4056 1A Li-ion lithium Battery Charging Module – Mini USB
SKU: 9711₹ 61.00(inc GST)
₹ 51.69 (+18% GST extra)
- Input voltage : 4.5V ~ 5.5V.
- Input Interface: Micro USB port.
- Charging method: linear charge.
- A full charge voltage: 4.2V.
- Power: 4.2 w.
- Charging accuracy: 1.5%.
- Operating Temperature: -10 to +85ºC
- Charging indicator: Blue LED charging, Red LED full
-
TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
SKU: 34697₹ 61.00(inc GST)
₹ 51.69 (+18% GST extra)
- Input voltage : 4.5V ~ 5.5V.
- Input Interface: Micro USB port.
- Charging method: linear charge.
- A full charge voltage: 4.2V.
- Power: 4.2 w.
- Charging accuracy: 1.5%.
- Operating Temperature: -10 to +85ºC
- Charging indicator: Blue LED charging, Red LED full
-
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
SKU: 44232₹ 75.00₹ 29.00(inc GST)
₹ 24.58 (+18% GST extra)
You save: ₹ 46.00
- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
-
HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Plate
SKU: 299509₹ 111.00(inc GST)
₹ 94.07 (+18% GST extra)
- Overcharge voltage range: 4.25-4.35v ± 0.05v
- Charging voltage: 8.4V-9V
- Upper limit operating current: 5A
- Upper limit instantaneous current: 7A
- Quiescent current: less than 10uA
- Internal resistance: less than 300mΩ
-
6S 40A 18650 Lithium Battery Protection Board
SKU: 618355₹ 649.00(inc GST)
₹ 550 (+18% GST extra)
- Maximum discharge current: 40A
- Instantaneous discharge current: 70A
- Charging voltage: 25.5V
- Maximum charging current: 40A
- Overcharge detection voltage: 4.25±0.025V
- Overcharge protection delay: 1.0±0.5S
- Overcharge release voltage: 4.15±0.05V
- Battery balance detection voltage: 4.125±0.025V
- Battery balance release voltage: 4.125±0.05V
- Battery balance current: 41±5mA
- Working current: ≤40uA
-
6S 20A Li-ion Lithium Battery 24V 18650 Charger Protection Board Module
SKU: 456509₹ 399.00(inc GST)
₹ 338.14 (+18% GST extra)
- Charging voltage: 25.5V
- Charging current: 20A (MAX)
- Overcharge detection voltage: 4.28 ± 0.05V
- Overcharge protection delay: 0.1S
- Overcharge release voltage: 4.08 ± 0.05V
- Over discharge detection voltage: 2.55 ± 0.08V
- Overdischarge detection delay: 0.1S
- The overdischarge release voltage: 2.9 ± 0.1V
-
5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P
SKU: 62252₹ 99.00(inc GST)
₹ 83.9 (+18% GST extra)
- BAT Discharging Stop Voltage:2.9V
- Discharging Efficiency:85%(input 3.7V output 5V/1A)
- Charging and discharging indication
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ±1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
-
5S 40A 18650 Li-ion Lithium Battery Charger Protection Board
SKU: 618351₹ 419.00(inc GST)
₹ 355.08 (+18% GST extra)
- Charging current: 25A
- Discharging Current: 25A
- Charging voltage: 21V
- Single Cell overcharge protect voltage: 4.23 – 4.28V
- Overcharge Protect Delay: 0.5 – 1.5S
- Single Cell over-discharge protect voltage: 2.72 – 2.88V
- Single Cell over-discharge protect recover voltage: 2.9 – 3.1V
- Overcharge/Discharge Protect Current: 60A
-
5S 25A 18650 Lithium Battery Protection Board
SKU: 618348₹ 399.00(inc GST)
₹ 338.14 (+18% GST extra)
- Continuous discharge current: 15A(max)
- Instantaneous discharge current: 25A
- Charge voltage: 21V
- Charging current: 15A(max)
- Overcharge Protect:
- Over-charge detect: 4.28±0.05V
- Protect delay: 0.5s
- Over-charge release: 4.28±0.05V
- Working current: ≤30uA
- Sleep current: (when over-charge)≤10uA
- Working Temperature Range: -30-+80
-
5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery
SKU: 330018₹ 389.00(inc GST)
₹ 329.66 (+18% GST extra)
- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
-
4S High Current up to 30A Lithium Battery Protection Board four Series of 14.8V 16.8V
SKU: 502572₹ 349.00(inc GST)
₹ 295.76 (+18% GST extra)
- Overcharge detection voltage: 4.25 ± 0.025V
- Overcharge release voltage: 4.15 ± 0.05V
- Over-discharge detection voltage: 2.50 ± 0.08V
- Over-discharge termination voltage: 3 ± 0.1V
- Overcurrent: 20-30A
- Working current: 15A
-
4S 10A 18650 Lithium Battery Protection Board
SKU: 618341₹ 250.00(inc GST)
₹ 211.86 (+18% GST extra)
- Model;Â HX-4S-A01
- This protection board is suitable for 4 series Li-ion cell.
- Adopt a precision integrated circuit for fast and safe charging.
- Support overcharge protection, over-discharge protection, and short circuit protection.
-
4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
SKU: 223535₹ 369.00(inc GST)
₹ 312.71 (+18% GST extra)
- The Successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 cannot start the drill!!)
- Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
-
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
SKU: 223550₹ 360.00(inc GST)
₹ 305.08 (+18% GST extra)
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable, a Balance Board for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube.
-
3S 12V 25A 18650 Lithium Battery Protection Board
SKU: 43646₹ 259.00(inc GST)
₹ 219.49 (+18% GST extra)
- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
-
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality
SKU: 43799₹ 199.00(inc GST)
₹ 168.64 (+18% GST extra)
- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
-
3S 10A 12V 18650 Lithium Battery Charger Board Protection Module
SKU: 43921₹ 179.00(inc GST)
₹ 151.69 (+18% GST extra)
- Over discharge voltage range : 2.3-3.0 v ± 0.05.
- Recharge voltage range: 4.25-4.35 v ± 0.05 v.
- Operating current : 6-8A.
- Operating temperature : -40 to + 50 ℃.
- Current limit : 10-13A.
-
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
SKU: 223554₹ 299.00(inc GST)
₹ 253.39 (+18% GST extra)
- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
-
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
SKU: 223558₹ 230.00(inc GST)
₹ 194.92 (+18% GST extra)
- 3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power below 135W
-
2S 5A 8.4V 18650 Lithium Battery Charger Board Protection Module
SKU: 44010₹ 129.00(inc GST)
₹ 109.32 (+18% GST extra)
- Input Voltage: 8.4 – 9V.
- Overcharge Detection Voltage: 4.25-4.35V±0.05V.
- Over-Discharge Detection Voltage: 2.3-3.0V±0.05V.
- Maximum Working Current: 5A.
- Transient Current: 7A.
-
1S 18650 Li-ion Lithium Battery BMS Charger Protection Board for 3.7V Battery
SKU: 330131₹ 69.00(inc GST)
₹ 58.47 (+18% GST extra)
- High accuracy voltage detection circuit;
- Using high voltage device charging terminal;
- The built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit);
- The battery charge and discharge can control the MOS transistor;
-
1S 18650 3.7V lithium battery protection plate 6 MOS
SKU: 44100₹ 99.00(inc GST)
₹ 83.9 (+18% GST extra)
- Over charge detection voltage : 4.25 + 0.05V
- Over charge release voltage : 4.23 + 0.05V
- discharge detection voltage : 2.45 + 0.1V
- Ceiling continuous current : 12A
- Overcurrent detection current : 15A
- Input Charging voltage : 4.2V
- Product size : 35*7.4*2.2MM
- IC components : DW01+8205A
