Categories

Breakout Board

  • 8 Channel Bi-Directional Logic Level Converter Module

    SKU: 223517
     69.00

    (inc GST)

    ₹ 58.47 (+18% GST extra)

    Add to cart
  • ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier

    SKU: 43582
     375.00

    (inc GST)

    ₹ 317.8 (+18% GST extra)

    1. WIDE SUPPLY RANGE : 2.0V to 5.5V
    2. LOW CURRENT CONSUMPTION : Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
    3. PROGRAMMABLE DATA RATE : 8SPS to 860SPS
    4. It has Internal low-drift voltage reference
    5. Internal Oscillator.
    6. Internal PGA.
    Add to cart
  • AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module

    SKU: 31179
     51.00

    (inc GST)

    ₹ 43.22 (+18% GST extra)

    1. Input Voltage: 4.5V to 15V
    2. Output Voltage: 3.3V to 5V
    3. Output Current: 800mA
    4. Onboard AMS1117 chip
    5. Onboard power indicator to indicate power is turned on: Red LED
    6. Output voltage interface, connection to facilitate the experimental
    7. Small Compact Size, 3Pin Type, Breadboard Friendly
    Add to cart
  • APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino

    SKU: 456175
     399.00

    (inc GST)

    ₹ 338.14 (+18% GST extra)

    1. Operational Voltage: 3.3V.
    2. Ambient Light & RGB Color Sensing.
    3. Proximity Sensing.
    4. Gesture Detection.
    5. Operating Range: 4-8in (10-20cm).
    6. I2C Interface (I2C Address: 0x39).
    Read more
  • AT24C256 Serial EEPROM I2C IIC Interface Data Storage Module for Arduino

    SKU: 319269
     65.00

    (inc GST)

    ₹ 55.08 (+18% GST extra)

    1. 8P chip seat, installation of AT24C256 chip;
    2. Pin-powered on-board power indicator;
    3. I2C communications required pull-up resistor;
    Read more
  • AVR ISP 10 Pin to 6 Pin Adapter Board

    SKU: 31145
     72.00

    (inc GST)

    ₹ 61.02 (+18% GST extra)

    1. Made of high-quality material, practical and durable
    2. No. of Pinon USBASP side: 10.
    3. No. of Pinon Device under programming side: 6.
    4. Connector type on USBASP side: Male.
    5. Connector type on Device under programming side: Female.
    6. Header Pin Pitch: 2.54mm (0.1in).
    7. Pin Numbers Text: Yes on Top and Bottom sides of every pin.
    Add to cart
  • Breakout Board PS2 Connector

    SKU: 7441
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1. PS2 Connector breakout board
    2. Connectors pre-soldered
    3. Compatible with Lynxmotion PS2 V3 wireless controller
    4. Holes compatible with Arduino and Lynxmotion Electronics
    5. Dimensions: 45 x 22x 22 (L x W x H) mm
    6. Weight: 12gm
    Add to cart
  • CD74HC4067 High Speed ​​CMOS 16-Channel Analog/Digital Multiplexer Breakout Module

    SKU: 43953
     160.00

    (inc GST)

    ₹ 135.59 (+18% GST extra)

    1. 2V to 6V operation
    2. “On” resistance: 70 Ohms @ 4.5V
    3. 6ns break-before-make @ 4.5V
    4. Wide operating temperature range: -55C to 125C
    Add to cart
  • CH375B USB Disk Read-write Module USB Flash Disk For Arduino

    SKU: 43435
     450.00

    (inc GST)

    ₹ 381.36 (+18% GST extra)

    1. 2×8 connector, easy with the MCU mount.
    2. Jumper selectable can work in parallel or serial mode.
    3. On board 3.3 V LDO 1117, provides 800 mA current.
    4. 5 V power supply is powered by the target board.
    5. 12 MHZ crystal.
    Add to cart
  • CJMCU MCP4725 I2C DAC Breakout Development Board Module

    SKU: 43952
     149.00

    (inc GST)

    ₹ 126.27 (+18% GST extra)

    1. 12-bit resolution
    2. I2C Interface (Standard, Fast, and High-Speed supported)
    3. Small package
    4. 2.7V to 5.5V supply
    5. Internal EEPROM to store settings
    Add to cart
  • CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board

    SKU: 421239
     299.00

    (inc GST)

    ₹ 253.39 (+18% GST extra)

    1. Low Standby Current.
    2. 1-to-8 Bidirectional Translating Switches.
    3. I2C Bus and SMBus Compatible.
    4. 5-V Tolerant Inputs.
    5. Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
    Read more
  • CJMCU-123 WS2812 RGB LED Breakout Module

    SKU: 44120
     59.00

    (inc GST)

    ₹ 50 (+18% GST extra)

    1. Supply Voltage: 5V.
    2. Viewing angle: 120 degrees
    3. The color of the light was highly consistent
    4. Full-color module, Full-color soft lights a lamp strip.
    5. Built-in electric reset circuit and power lost reset circuit.
    6. Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
    Add to cart
  • CJMCU-2551 MCP2551 CAN Protocol Controller High-speed Interface Module

    SKU: 421234
     249.00

    (inc GST)

    1. Supports 1 Mb/s operation
    2. Implements ISO-11898 standard physical layer requirements
    3. Suitable for 12V and 24V systems
    4. Up to 112 nodes can be connected
    Add to cart
  • CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Sensor Module Breakout Board for Arduino

    SKU: 44580
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1.Wide Analog Input Voltage Range: +/-5V
    2.Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc = 9.0V
    3.Logic Level Translation: to enable 5V to communicate with +/-5V analog signals
    4.Board Size: 30 x 19 mm

    Add to cart
  • CJMCU-9833 AD9833BRMZ Programmable Sine Triangular Square Waveform Generator Module

    SKU: 421238
     599.00

    (inc GST)

    ₹ 507.63 (+18% GST extra)

    1. Working voltage: 2.3V-5.5V.
    2. Working temperature range: -40 ~ + 105.
    3. Onboard 25MHZ (accuracy of 50ppm) active crystal.
    4. On-board high-speed amplifiers
    Read more
  • CJMCU-TRRS 3.5mm Jack AV Stereo Module

    SKU: 31293
     72.00

    (inc GST)

    ₹ 61.02 (+18% GST extra)

    1. Mini design, portable and easy to use.
    2. It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
    3. Dimensions: 20 x 16 x 8(L x W x H) mm
    4. Weight: 2 gm
    Add to cart
  • CJMCU9813 Full Color LED RGB I2C Communication Drive Control Module

    SKU: 421235
     299.00

    (inc GST)

    ₹ 253.39 (+18% GST extra)

    1. IC input voltage: 5V-6.5V.
    2. Built-in LDO: 4.5V regulator output.
    3. Three-way drive: each drives current 0-45ma.
    4. Built-in ring oscillator(1.2MHZ) to support ongoing FREE-RUN modulation output.
    5. Maximum clock frequency: 15MHZ.
    Add to cart
  • Cytron Breakout USB A Type Male – Good Quality

    SKU: 7442
     131.00

    (inc GST)

    ₹ 111.02 (+18% GST extra)

    This is a breakout board for USB Connector A-Type. It is pre-soldered with the USB connector. Pins are broken out to 0.1″  for easy mounting on breadboard or donut board. Ideal for USB DIY project.

    Add to cart
  • DC 3-5V X9C103S Digital Potentiometer Board Module for Arduino

    SKU: 43886
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1. Supply voltage: 3V-5V
    2. Chip: X9C103S
    3. Dimensions : 28 x 14 x 4 (LxWxH) mm.
    4. 10K span potentiometer.
    5. Potentiometer center tap between the 0-10k slide in total 100 (potentiometer wiper typical impedance 40 ohms)
    Add to cart
  • DC Power Module DC Power Adapter Plate

    SKU: 31280
     72.00

    (inc GST)

    ₹ 61.02 (+18% GST extra)

    1. Compatible with connector size: 5.5×2.1 mm.
    2. Weight: 2 gm
    3. Power output interface: 2 VCC, 2-way GND
    4. Reliable and safe connection
    5. Size: 26×12×13(L×W×H) mm
    6. Hole Diameter: 6.5mm
    7. Pin Diameter: 2.1mm
    8. It has wide use for safe and reliable connection between various Application and power sources
    Add to cart
  • DHT11 Digital Relative Humidity & Temperature Sensor Module

    SKU: 28586
     149.00

    (inc GST)

    ₹ 126.27 (+18% GST extra)

    1. The module can detect the surrounding environment of the humidity and temperature
    2. High reliability and excellent long-term stability
    3. The output from the digital output
    4. Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
    5. Temperature measuring range: 0~+50degree.
    6. Humidity measurement accuracy: ±5.0%RH.
    7. Temperature measurement accuracy: ±2.0degree.
    Add to cart
  • DS1302 Real Time Clock Module (With CR2032 Battery)

    SKU: 31187
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Dimensions: 16.5mm x 26.3mm x 1.6mm
    2. Crystal 32.768KHz, matching capacitance 6pF, size 2 * 6mm
    3. DS1302 8-pin SMD homemade chips
    4. Module operating voltage compatible 3.3V/5V can be connected with 5V and 3.3V microcontroller
    5. Operating temperature: 0 degree — 70 degree
    Add to cart
  • DS3231 Precise Real Time Clock Module I2C RTC AT24C32

    SKU: 11496
     110.00

    (inc GST)

    ₹ 93.22 (+18% GST extra)

    1. 1Hz output pin SQW.
    2. 32KHz output pin 32K.
    3. Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
    4. Time Format: HH: MM: SS (12/24 hr).
    5. Date Format: YY-MM-DD-dd.
    6. DS3231 based RTC with 2032 Battery Holder.
    7. Highly Accurate RTC
    8. Real-Time Clock Counts
    9. Digital Temp Sensor Output.
    10. Register for Aging Trim.
    11. Two Time-of-Day Alarms.
    12. Programmable Square-Wave Output Signal.
    13. Configurable I2C device Address for AT24C32 using SMD jumpers on PCB (A0, A1, A2).
    Add to cart
  • ESP-01 Adapter 3.3V 5V Board

    SKU: 62434
     149.00

    (inc GST)

    ₹ 126.27 (+18% GST extra)

    1. On-board level shift circuit
    2. Arduino UNO R3 and the compatible board can directly connect to this module;
    3. Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
    4. Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
    5. Working current: 240mA(MAX).
    Add to cart
  • ESP8266 Adapter Plate Serial Wireless WIFI Module-1pcs

    SKU: 31233
     49.00

    (inc GST)

    ₹ 41.53 (+18% GST extra)

    1. It features reserved land-pattern for the 3.3V regulator
    2. It has Pinouts on the top layer in black colour.
    3. Compatible with Latest ESP-12F ESP8266 Wifi Module
    4. It includes a 10K pull-up resistor populated on PCB.
    Add to cart
  • EZ-USB FX2LP CY7C68013A USB Development Board Logic Analyzer

    SKU: 408164
     699.00

    (inc GST)

    ₹ 592.37 (+18% GST extra)

    1. High-Speed USB2.0 specification at 480Mbps, compatible with USB 1.1
    2. USB2.0 Core, high speed 8051 core, 16K RAM.
    3. Built-in IDE interface for IDE devices
    4. Powered by USB Port
    5. Compact Design
    Add to cart
  • Frequency Adjustable Pulse Generator Module NE555

    SKU: 31287
     72.00

    (inc GST)

    ₹ 61.02 (+18% GST extra)

    1. Input Voltage: 5V-15VDC
    2. Output amplitude: 4.2V V-PP to 11.4V V-PP.
    3. Output Current : 15mA for 5V & 35mA for 12V.
    4. Color: Blue
    5. Working voltage: 5-12V
    6. Size: 31 x 22 x 3 mm (LxWxH)
    7. Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
    Add to cart
  • GY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module

    SKU: 488983
     899.00

    (inc GST)

    1. The built-in 24bit AD converter.
    2. Immersion gold PCB, high quality, machine welding process to ensure quality.
    3. Power supply: 3 – 5V ( internal low dropout regulator ).
    4. Communication modes: Standard the IIC / SPI communication protocol.
    Add to cart
  • ICSH044A ICSTATION Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module

    SKU: 51717
     590.00

    (inc GST)

    ₹ 500 (+18% GST extra)

    1. Operating Voltage: 2.5-5.25 V
    2. Operating Temperature:20~70 °C
    3. Material: Plastic.
    4. Application: Electronic Circuits.
    5. Dimensions: 28 x 22 x 8 (LxWxH) mm
    6. Weight: 2 gm
    Add to cart
  • IIC/I2C Serial Interface Adapter Module

    SKU: 31211
     79.00

    (inc GST)

    ₹ 66.95 (+18% GST extra)

    1. 5V power supply.
    2. Serial I2C control of LCD display using PCF8574.
    3. Backlight can be enabled or disabled via a jumper on the board.
    4. Contrast control via a potentiometer.
    5. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
    Add to cart
  • IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi

    SKU: 44050
     110.00

    (inc GST)

    ₹ 93.22 (+18% GST extra)

    1. Voltage: 3.3 – 5V.
    2. Ports: Digital Level.
    3. Output load voltage: 0-24 V.
    4. Output load current: <5A (1A above need to add heat sink).
    5. Platform: Arduino, MCU, ARM, raspberry pi.
    6. Using original IRF520 Power MOS, you can adjust the output PWM
    Add to cart
  • Laser Module 650NM 5V

    SKU: 44163
     90.00

    (inc GST)

    ₹ 76.27 (+18% GST extra)

    1. Voltage: 3.0 V – 5 V.
    2. Driver: APC circuit.
    3. Line length: about 135 mm.
    4. Transmit power: 58mW.
    5. Operating Current: 40mA.
    6. Operating Current: 40mA.
    7. Operating temperature: -36◦C ~ 65◦C.
    Add to cart
  • Level Converter- 4 Channel

    SKU: 16919
     61.00

    (inc GST)

    ₹ 51.69 (+18% GST extra)

     

    1. Material: ABS + metal
    2. Dimensions: 20 x 17 x 3 (L x W x H) mm
    3. Weight: 2gm
    4. Mutual transform between 5V TTL and 3.3V TTL
    5. Four channels of logic and high voltage low voltage logic can two-way transform
    6. Portable and lightness, with 2 rows 6 pin contact pins
    Add to cart
  • M274 360 Degree Rotary Encoder Brick Sensor Module

    SKU: 11517
     90.00

    (inc GST)

    ₹ 76.27 (+18% GST extra)

    1. Model : KY-040.
    2. Type : Incremental Encoder.
    3. Cycles per revolution (CPR) : 20.
    4. Working voltage : 0 – 5V.
    5. Material : PCB + Brass.
    6. Weight : 10 gm.
    Add to cart
  • MAX4466 Electret Microphone Amplifier with Adjustable Gain Module

    SKU: 456204
     215.00

    (inc GST)

    ₹ 182.2 (+18% GST extra)

    1. Supply Voltage Operation: +2.4V to +5.5V.
    2. Versions with 5nA Complete Shutdown Available only (MAX4467/MAX4468).
    3. Excellent Power-Supply Rejection Ratio: 112dB.
    4. Excellent Common-Mode Rejection Ratio: 126dB.
    5. High AVOL: 125dB (RL = 100kΩ).
    Read more
  • MCU-Micro USB Breadboard 5V Power Supply Module-2pcs

    SKU: 28401
     59.00

    (inc GST)

    ₹ 50 (+18% GST extra)

    1. Interface: USB OTG
    2. Connector Type: USB Micro Female
    3. Size: 15 x 13mm
    4. Breakout Signals Pin Spacing : 0.1 inch / 2.54mm
    5. Mounting Holes: Yes
    6. PCB Color: Blue
    Add to cart
  • Micro Minim OSD

    SKU: 29457
     649.00

    (inc GST)

    ₹ 550 (+18% GST extra)

    1. ATmega328P with Arduino bootloader
    2. MAX7456 monochrome on-screen display
    3. +5V 500mA regulator for up to +12V supply input
    4. FTDI cable compatible pinout
    5. The standard 6-pin ISP header
    6. Two LED indicators
    7. ATmega328P with Arduino bootloader
    8. Modifications for direct connection of two batteries (up to 4S)
    9. Standalone, or with APM/ Flip / Flip32+ flight controllers
    10. This board can be used for any MWC boards or ReadyToFlyer
    Add to cart
  • Micro SD card adapter for RAMPS

    SKU: 51912
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    1. SPI mode.
    2. Supply voltage: 4.5 – 5.5V.
    3. Up to 50 MB / sec data transfer rate.
    4. Located directly on a RAMPS.
    5. Also, be used with other microcontrollers.
    6. Dimensions: 27 x 17 x 11 mm(LxWxH).
    7. Weight: 5 gm.
    Add to cart
  • Micro SD Card Module

    SKU: 11566
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
    2. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
    3. Control Interface: GND, VCC, MISO, MOSI, SCK, CS
    4. Size: 45 x 28mm
    5. Net weight: 6g
    Add to cart
  • Micro USB Type B Mike Patch Straight Plug Adapter Plate Welding Head-2pcs.

    SKU: 31176
     49.00

    (inc GST)

    ₹ 41.53 (+18% GST extra)

    1. MICRO USB ( 5pin, B type, female connector )
    2. Base Material: FR4.
    3. Board Thickness: 1.6mm.
    4. Size: 1.5cm x 1.3cm .

    Add to cart
  • Mini Digital Power Amplifiers 3W Dual Track Red PAM8403

    SKU: 31250
     89.00

    (inc GST)

    ₹ 75.42 (+18% GST extra)

    1. Input Voltage : 2.5-5.5 V(USB power supply).
    2. Output Impedance : 4 ohm.
    3. Efficiency : 90%.
    4. Frequency Response : 150 Hz – 20 KHz.
    5. Input Impedance : 2 Kohm.
    6. Dimensions : 15 x 20 mm.
    Add to cart
  • Mini SD Card MP3 Sound Module For PIC Arduino WTV020-SD

    SKU: 28532
     249.00

    (inc GST)

    ₹ 211.02 (+18% GST extra)

    1. Supports FAT file system SD carrier
    2. Supports playing of 4Bit ADCPM format files
    3. Recognize the voice files automatically
    4. Support microprocessor and key control
    5. Audio output: 16bitDAC and PWM
    6. Maximum voice storage: 512 voice
    7. Operating voltage: DC 2.6 to 3.6V
    8. Quiescent current: 16 μA (SD card is not inserted)
    Add to cart
  • MP3-TF-16P MP3 Disk TF Card Module Serial Port

    SKU: 31193
     208.00

    (inc GST)

    ₹ 176.27 (+18% GST extra)

    1. Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
    2. 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
    3. Fully supports FAT16, FAT32 file system, maximum support 32G TF card, support U disk to 32G, 64M bytes of NORFLASH
    4. A variety of control modes are available. IO control mode, serial mode, AD key control mode
    Read more
  • NE555 + CD4017 Water Flowing Light LED Module DIY Kit

    SKU: 415925
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Chip: NE555, CD4017
    2. LED Quantity: 10pcs
    3. LED Color: Red
    4. Voltage: 2.5V – 14.5V
    5. PCB Size: 54mm x 21mm
    6. PCB Thickness: 1.6mm.
    Add to cart
  • NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board

    SKU: 31313
     198.00

    (inc GST)

    ₹ 167.8 (+18% GST extra)

    1. The perfect solution for breaking out the pins from Lua V3 Nodemcu.
    2. Lead-out all the IO ports of the ESP-12E development board
    3. Lead out the pins of 5V and 3.3V power supply
    4. Convenient to connect with peripheral modules
    5. Onboard 5V / 1A DC-DC step-down converter circuit
    6. Onboard power indicator
    7. With DC power jack 6-24V.
    Add to cart
  • PAM 8610 Digital Stereo Class-D Amplifier Board 2x15W Output

    SKU: 43918
     169.00

    (inc GST)

    ₹ 143.22 (+18% GST extra)

    1. Dual-Channel Stereo Output
    2. Run-on 7V to 15V power Supply
    3. 32 Steps DC volume control has a +32dB to -75dB range.
    4. 40pin QFN 6 x 6 mm package.
    5. Much higher efficiency in terms of cost and performance than competitors’ ICs
    Add to cart
  • PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier

    SKU: 33457
     69.00

    (inc GST)

    ₹ 58.47 (+18% GST extra)

    1. Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
    2. Double panel wiring solves crosstalk.
    3. Super mini design allows it to be easily placed in a variety of digital products.
    4. 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
    5. Filterless, Low Quiescent Current and Low EMI and Low Noise.
    6. Short Circuit Protection and Thermal Shutdown
    Add to cart
  • PCF8563 RTC Board For Raspberry Pi Real Time Clock Module-Blue

    SKU: 43604
     350.00

    (inc GST)

    ₹ 296.61 (+18% GST extra)

    1. Model: PCF8563
    2. Weight : 3 gm.
    3. I2C pin header,
    4. 3.3V battery.
    5. Dimensions : 61  x 16  x 11 mm (LxWxH).
    Read more
  • PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

    SKU: 28449
     208.00

    (inc GST)

    ₹ 176.27 (+18% GST extra)

    1. Module chip using PCF8951
    2. Module supports external voltage input of the 4-way acquisition (voltage input range of 0-5v)
    3. The module integrated photoresistor by AD collection precise value of the ambient light intensity
    4. Module integrated thermistor by the precise value of the ambient temperature of the AD acquisition
    5. Module integrated 1 channel 0-5V voltage input acquisition (the blue potentiometer to adjust the input voltage)
    6. Modules with power indicator (for the module power supply indicator lights)
    7. Modules with DA output indicator, when the module DA output interface voltage reaches a certain value, will be lit panel the DA output indicator, the higher the voltage, the more obvious indicator brightness
    Add to cart
  • PS2 Joystick Module Breakout Sensor

    SKU: 11484
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Dimensions: 40 x 27 x 15 (LxWxH) mm.
    2. Weight: 10gm (without Hat).
    3. 2.54mm pin interface leads.
    4. Operating Voltage: 5V.
    5. Long service life and stable performance.
    6. Standard interface and electronic building blocks.
    7. Widely use in Arduino DIY projects.
    Add to cart
  • QFN 56 64 SMD TURN TO DIP PCB Adapter

    SKU: 108049
     49.00

    (inc GST)

    ₹ 41.53 (+18% GST extra)

    This is a QFN 56 64 SMD TURN TO DIP PCB Adapter, The SMD adapter/reduction for SMF components QFN56 or QFN64.

    Add to cart
  • QFN/ TQFN/ LQFP QFP 16-80 PIN Switch Over DIP Double-sided PCB Adapter

    SKU: 107966
     229.00

    (inc GST)

    ₹ 194.07 (+18% GST extra)

    This double-sided QFN/ TQFN/ LQFP QFP 16-80 PIN Switch Over DIP Double-sided PCB Adapter pinboard features one side of the patch is 16 pin -80 pin turn DIP, 0.5mm spacing and the other side is 40 pin -64 pin, pitch 0.4mm pitch and 80 pins 0.65 spacing.

    Add to cart
  • QFN24 TO DIP Adapter

    SKU: 107327
     59.00

    (inc GST)

    ₹ 50 (+18% GST extra)

    QFN24 0.65mm 0.5mm to 2.54mm DIP Adapter PCB Board Converter IC test F24. This is a Double-Side PCB Circuit Board, Each PCB board has 24 pins. Aside for pin pitch size 0.5mm, It can be used to convert QFN24 ( Body 4x4mm,Pitch 0.5mm ) to DIP-24 (2.54mm pin pitch) B side for pin pitch size 0.65mm.

    Add to cart
  • QFN32 QFN40 SMD to DIP Adapter PCB Board-2Pcs.

    SKU: 107793
     49.00

    (inc GST)

    ₹ 41.53 (+18% GST extra)

    This adapter board provides an easier connection with the use of a male pin header type. You can do tests using this adapter and it is useful when you have a chip and have not yet decided what connections you need.

    Add to cart
  • QFP/TQFP/LQFP/FQFP/SOP/SSOP32 to DIP Adapter/ Breakout Board

    SKU: 107872
     49.00

    (inc GST)

    ₹ 41.53 (+18% GST extra)

    The PCB board has two sides. One side for pin pitch size 0.8mm can be used to convert QFP32, TQFP32, LQFP32, or FQFP32 to DIP32 2.54mm. Another side for pin pitch size 0.8mm can be used to convert SOP32, SSOP32 to DIP 2.54mm.

    Add to cart
  • RDA5807M FM Stereo Radio Module RRD-102 V2.0 Wireless Pro for Arduino Tuner

    SKU: 44080
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Supply voltage: 2.7 to 3.3 V.
    2. Output Impedance: 32Ω.
    3. Frequency band: 50 -115 MHz.
    4. Digital auto gain control (AGC).
    5. Only support 2-wire bus interface.
    Add to cart
  • Real Time Clock DS1307 RTC I2C Module AT24C32 + Battery

    SKU: 44162
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    Add to cart
  • SD Card Reading Writing Module for Arduino

    SKU: 44160
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. All SD SPI pins output, MOSI, SCK, MISO, and CS.
    2. Support 5V/3.3V input.
    3. Size:4.7  x 3.1 cm.
    4. LED indicator.
    5. SD Card Holder.
    6. Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
    Add to cart
  • Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232-2pcs.

    SKU: 31380
     79.00

    (inc GST)

    ₹ 66.95 (+18% GST extra)

    1. High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
    2. Works with PCs or Laptops
    3. Supports microcontroller UARTs – 5V TTL signal levels.
    4. Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
    5. Small PCB footprint of 50´40mm
    6. Low current status LED(s)
    7. Very low power consumption
    Add to cart
  • SOIC TO DIP 20 PIN Adapter-2pcs

    SKU: 107400
     59.00

    (inc GST)

    ₹ 50 (+18% GST extra)

    SOIC TO DIP 20 PIN Adapter is a Perfect for use with Arduino / Raspberry Pi or any microcontroller. This is a Double-Side PCB Circuit Board, Each PCB board has 20 pins.

    Add to cart
  • SOP16 SOP28 TO DIP16 DIP28 PCB Adapter

    SKU: 108195
     53.00

    (inc GST)

    ₹ 44.92 (+18% GST extra)

    This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that You need not to buy the DIP chips for prototyping especially.Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping.

    Add to cart
  • SOP8 TSSOP8 SSOP8 TO DIP8 Adapter-2Pcs.

    SKU: 108022
     54.00

    (inc GST)

    ₹ 45.76 (+18% GST extra)

    1. This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips.
    2. The side for pin pitch size 1.27mm, It can be used for most of the SO、SOP、SOIC to 2.54mm DIP.
    3. B side for pin pitch size 0.65mm, It can be used for most of the SSOP、TSSOP、MSOP to 2.54mm DIP.
    Add to cart
  • SSOP-48 to DIP-48 SMT Adapter

    SKU: 107240
     69.00

    (inc GST)

    ₹ 58.47 (+18% GST extra)

    SSOP-48 (0.635 mm pin pitch) to DIP-48 (600 mil body width, 0.1″ pin pitch) surface mount adapter. PCB dimensions: 1000 mils x 2400 mils x 62.5 mils (25.4 mm x 60.96 mm x 1.6 mm). Topside of board fits surface mount footprint

    Add to cart
  • Stereo Wireless Speaker Bluetooth 4.0 Audio Receiver Module For DIY Modified Speaker

    SKU: 456203
     229.00

    (inc GST)

    ₹ 194.07 (+18% GST extra)

    Add to cart
  • TEA5767 Video FM Module with Detachable Antenna

    SKU: 410807
     549.00

    (inc GST)

    ₹ 465.25 (+18% GST extra)

    1. Directly plug antenna interface
    2. I2C bus communication
    3. Multi-capacitor combined filter
    4. Blue LED power indicator
    5. FM chip module TEA5767
    6. Onboard 3.5mm audio interface
    7. If connects with single-chip, only connect the Power Ground and two I2C communication cable
    8. LC harmonic oscillator uses low cost fixed chip
    9. No need to adjust Intermediate frequency
    10. High sensitivity(low noise RF input amplifier)
    11. High power auto gain control AGC circuit
    Add to cart
  • Tiny RTC Real Time Clock DS1307 I2C IIC Module for Arduino

    SKU: 318863
     59.00

    (inc GST)

    ₹ 50 (+18% GST extra)

    1. Operating Voltage: 5V
    2. Two wire I2C interface
    3. Hour: Minutes: Seconds AM/PM
    4. Leap year compensation
    5. Accurate calendar up to the year 2100
    6. Consumes Less than 500nA in Battery-Backup
    Add to cart
  • TPA3110 Mono Channel Digital Amplifier Board 30W Power Amplifier Module

    SKU: 456190
     249.00

    (inc GST)

    ₹ 211.02 (+18% GST extra)

    1. Amplifier Chip: TPA3110.
    2. Working Voltage: DC 8-26V.
    3. Output Power: 1 x 30W.
    4. Applicable Speaker Impedance: 4/6/8 ohm(8 ohms Best).
    5. PCB Board Size: 44 x 30 x 10 / 1.65 x 1.18in.
    Add to cart
  • TQFP32/44/64/80/100 to DIP PCB Board Converter Adapter-1Pcs.

    SKU: 107149
     55.00

    (inc GST)

    ₹ 46.61 (+18% GST extra)

     

    1. High-quality PCB FR4 Grade with FPT Certified.
    2. QFP/TQFP/LQFP/FQFP 32/44/64/80/100 pin switch over DIP double-sided pinboard
    3. Double-sided FR-4PCB, unique design makes the board compatible with more models of IC packages QFP
    Add to cart
  • Transparent Acrylic Case for PS2 Game Joystick Module

    SKU: 334846
     59.00

    (inc GST)

    ₹ 50 (+18% GST extra)

    Add to cart
  • TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RL FTDI MWC Programmer

    SKU: 43742
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    1. USB Connector type: USB-Mini
    2. Chip Used: FT232RL
    3. Output Voltage 5v and 3.3v Indicator LEDs USB Connector
    4. Automatic detection of data transfer speeds up to 1Mbps
    5. Data exchange capability with an external interface with UART protocol
    6. Supports Windows 8, Windows 7,  Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
    Add to cart
  • TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter

    SKU: 62491
     149.00

    (inc GST)

    ₹ 126.27 (+18% GST extra)

    1. VCCA Voltage level: 1.2V-3.6V
    2. VCCB Voltage level: 1.65V-5.5V
    3. It can provide 3.3-5V, 1.8-3.3V level conversion
    4. Dimension Approx: 26 x 15 mm
    5. PCB Color: Blue
    6. 8-bit bi-directional 3.3V-5V/5V-3.3V logic level converter board
    7. Serial communication interface compatible with UART/IIC/SPI port easily to connect
    Add to cart
  • USB Mini Discharge Load Resistor 2A/1A with 1A green LED, 2A red LED

    SKU: 44049
     125.00

    (inc GST)

    ₹ 105.93 (+18% GST extra)

    1. Switch and USB interface design.
    2. Rated Power: 5W-10W.
    3. Type: Fixed Resistor.
    4. Size: 75 x 15 x 11.6 (LxWxH)mm.
    Add to cart
  • USB Type A Breakout Board – Male

    SKU: 42887
     61.00

    (inc GST)

    ₹ 51.69 (+18% GST extra)

    If you want to add a standard type A USB male plug to your project, this breakout board is for you. As simple as it is, this board breaks out all 4 pins of the USB connector into more manageable 2.54mm pitch soldering holes. You can then solder a 4-pin header to plug into a breadboard or solder wires directly to the holes.

    Add to cart
  • VS1003 VS1003B MP3 Module Decoding Containing Microphones STM32

    SKU: 43235
     690.00

    (inc GST)

    ₹ 584.75 (+18% GST extra)

    1. Separate analog, digital, and IO power supply
    2. Serial data and control interface (SPI)
    3. 1 headphone and audio output interface
    4. 1microphone for recording, support audio encoding format
    5. 1 line input interface; supports MP3 and WAV stream
    6. Power indicator light.
    Add to cart
  • W25Q64 Storage 64Mbit 8MByte Data Flash module SPI Interface BV/FV

    SKU: 411810
     249.00

    (inc GST)

    ₹ 211.02 (+18% GST extra)

    1. IC: W25Q64FV
    2. Capacity: 64M-bit / 8M-byte
    3. Clock frequency: <104MHz
    4. Working voltage: 2.7V ~ 3.6V
    5. Current: 4mA
    6. Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
    Add to cart
  • WT588D-16P Voice Sound Audio Player Module DC 2.8V-5.5V for Arduino

    SKU: 43667
     320.00

    (inc GST)

    ₹ 271.19 (+18% GST extra)

    1. Module package (with FLASH memory and peripheral circuits) have DIP16, DIP28, chip packaging has DIP18, SSOP20, and LQFP32 form
    2. Built 13Bit/DA converter, and 12Bit/PWM output
    3. PWM output can directly drive 0.5W/8Ω speakers, push-pull current abundant support DAC / PWM output of two ways;
    4. Support for loading WAV audio formats;
    5. USB download mode, support for online download / offline download;
    6. Power supply: 2.8V to 5.5V
    7. Current consumption in sleep mode: less than 10µA;
    8. Sampling frequency: from 6KHz to 22KHz
    Add to cart
  • XD-21 LM358 Gain Amplification Module Operational Amplifier Module

    SKU: 44081
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. LM358 chip onboard.
    2. 100 gain of the circuit design.
    3. 10K onboard adjustable resistance, you can adjust the magnification.
    4. Onboard power indicator.
    5. The chip has led major pin can be directly input and output signals.
    Add to cart
  • XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module

    SKU: 456188
     389.00

    (inc GST)

    ₹ 329.66 (+18% GST extra)

    • LCD display frequency and duty cycle, very clear, PWM output can be set separately frequency and duty cycle.
    • It can be used as a square wave signal generator, generate a square wave signal.
    • It is very simple, will save parameters automatically, power off is not lost.
    Add to cart