Boards Compatible with Arduino
Arduino Board is most popular amongst student s and the beginner who want to start from the basics of electronics, programming, and coding. We Robu.in selling a variety of Arduino boards including Arduino Uno, mini, Nano, Mega2560, Wemos, Lilypad & Due.
Arduino is an open-source platform used for building electronics projects. Unlike most previous programmable circuit boards, the Arduino does not need a separate piece of hardware (called a programmer) in order to load new code onto the board you can simply use a USB cable.
-
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board Compatible with Arduino
₹ 1,575.00(inc GST)
₹ 1334.75 (+18% GST extra)
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
-
Mega 2560 ATmega2560-16AU Board without USB Cable for Arduino
₹ 899.00(inc GST)
₹ 761.86 (+18% GST extra)
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
-
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
₹ 294.00(inc GST)
₹ 249.15 (+18% GST extra)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
₹ 309.00(inc GST)
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
₹ 299.00(inc GST)
₹ 253.39 (+18% GST extra)
- It comes with USB and is more convenient to use.
- The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
- Built-in high precision RC, without external crystal oscillator, can be stable operation.
- Less peripheral parts, simple circuit design.
-
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
₹ 649.00(inc GST)
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
-
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
₹ 399.00(inc GST)
₹ 338.14 (+18% GST extra)
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
-
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
₹ 499.00(inc GST)
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
-
Uno Learning kit for Arduino
₹ 750.00(inc GST)
₹ 635.59 (+18% GST extra)
- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
-
UNO Based ESP8266 Nodemcu Development Board
₹ 425.00(inc GST)
₹ 360.17 (+18% GST extra)
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
-
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
₹ 239.00(inc GST)
₹ 202.54 (+18% GST extra)
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
-
Pro Mini ATMEGA328P 5V/16M Black- Standard version
₹ 349.00(inc GST)
₹ 295.76 (+18% GST extra)
- ATmega328 running at 16MHz with external resonator (0.5% tolerance).
- 100% Arduino compatible board.
- Max Output Current: 150mA.
- 0.8mm Thin PCB.
- USB connection off-board.
- Supports auto-reset.
- Onboard Power and Status LEDs.
-
Pro Mini ATMEGA328P 5V/16M (Official Version)
₹ 289.00(inc GST)
₹ 244.92 (+18% GST extra)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
-
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
₹ 269.00(inc GST)
₹ 227.97 (+18% GST extra)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 3.3V
- Clock frequency: 8MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
-
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
₹ 469.00(inc GST)
₹ 397.46 (+18% GST extra)
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
-
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
₹ 279.00(inc GST)
- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
₹ 289.00(inc GST)
₹ 244.92 (+18% GST extra)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
₹ 259.00(inc GST)
₹ 219.49 (+18% GST extra)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
-
Mega R3 Android Accessory Development Kit (ADK) + USB Cable
₹ 3,139.00(inc GST)
₹ 2660.17 (+18% GST extra)
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
-
Mega 2560 Atmega2560-16au compatible with Arduino + Cable + Transparent acrylic case
₹ 999.00(inc GST)
- Programmer: Atmel
- ATmega2560 microcontroller.
- 54 digital input/output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
-
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
₹ 1,090.00(inc GST)
₹ 923.73 (+18% GST extra)
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
-
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
₹ 270.00(inc GST)
₹ 228.81 (+18% GST extra)
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
-
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
₹ 1,650.00(inc GST)
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
-
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
₹ 490.00(inc GST)
₹ 415.25 (+18% GST extra)
- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
-
CH376S USB Module U Disk Read Write Module
₹ 399.00(inc GST)
- Supply Voltage: 5V
- Internal curing CH376S chip FAT file system, file operations simple and fast
- Support including USB thumb drives, USB hard drives, USB flash drives, and USB storage devices, USB card reader
- Compatible with CH372, host compatible with CH375
-
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
₹ 1,003.00₹ 699.00(inc GST)
₹ 592.37 (+18% GST extra)
You save(30.3%): ₹ 304.00
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
-
Atmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
₹ 825.00(inc GST)
- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
-
Arduino Uno R3 Beginners Kit
₹ 1,990.00(inc GST)
₹ 1686.44 (+18% GST extra)
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
-
Arduino Nano 3.0 Beginners Kit
₹ 2,199.00(inc GST)
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
-
Advanced Kit for Arduino
₹ 2,750.00(inc GST)
₹ 2330.51 (+18% GST extra)
- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)