Categories

PIC Development Tool

View cart “PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable” has been added to your cart.
  • ICSP Programmer Socket – UIC-S

    SKU: 10048
     418.00

    (inc GST)

    ₹ 354.24 (+18% GST extra)

    1. No external power needed
    2. Power Indicator LED on board
    3. Fit perfectly with UIC00A and UIC00B
    4. Support 18-pin, 28-pin, and 40-pin 8-bit PIC microcontroller.
    5. Selector to program 18-pin or 28-pin&40-pin PIC
    6. Come with 40-pin ZIF socket for ease of plug and unplug of PIC
    Add to cart
  • USB ICSP PIC Programmer – UIC00B

    SKU: 10053
     1,039.00

    (inc GST)

    ₹ 880.51 (+18% GST extra)

    1. Program most of the +3.3V or +5V PIC
    2. Compatible with PICkit2’s UART Tool and Logic Tool
    3. The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
    4. Compatible with Windows XP, Vista, 7, 8 and 8.1.
    5. Compatible with Microchip’s PICkit 2.
    6. Powered directly from the USB port.
    7. NO EXTERNAL POWER REQUIRED for UIC00B to function.
    8. Compatible with PICkit2’s Logic Tool and UART Tool.
    Add to cart
  • 16-bit or 32-bit PIC Start-Up Kit – SK1632

    SKU: 10062
     628.00

    (inc GST)

    ₹ 532.2 (+18% GST extra)

    1. Input voltage range: 7V to 15VDC.
    2. 1 x Programmable push button (digital input, connected to A1)
    3. 1 x Programmable LED (active high, connected to A0)
    4. Replaceable Crystal (default 8MHz)
    5. Ready pads for 2×8 Character parallel interface LCD
    6. USB micro B socket for PIC that supports USB peripheral
    7. USB bootloader may be utilized if needed
    Add to cart
  • 18 Pins PIC Start-up Kit – SK18B

    SKU: 10064
     619.00

    (inc GST)

    ₹ 524.58 (+18% GST extra)

    1. Compact, powerful, flexible and robust start-up platform.
    2. No extra components required for the PIC to function.
    3. No more frustrated work plugging PIC out and back for re-programming.
    4. Perfectly fit for 18 pins PIC16F MCU.
    5. With UIC00A, the program can be loaded in less than 4 seconds.
    6. On/Off switch for main power
    7. DC adaptor socket as power input
    Add to cart
  • 28 Pins PIC Start-up Kit – SK28A

    SKU: 10080
     724.00

    (inc GST)

    ₹ 613.56 (+18% GST extra)

    1. Industrial grade PCB.
    2. Every board is being tested before it is shipped out.
    3. Compact platform and breadboard-friendly
    4. Suitable for hobbyists and expert.
    5. Save development and soldering time.
    6. Turn pin for crystal comes with 20MHz Crystal by default, the user may use crystal at various frequencies
    7. Mini USB socket on board may use PIC18F2550 for USB device development, example USB Bootloader.
    8. 2×8 Character Parallel LCD pad ready (optional).
    Add to cart
  • 40 Pins dsPIC Start-Up Kit – SKDS40A

    SKU: 10086
     1,144.00

    (inc GST)

    ₹ 969.49 (+18% GST extra)

    1. ICSP connector for UIC00A /B-simple and fast method to load program.
    2. Perfectly fit for 40 pins dsPIC (16-bit), NOT for the 40-pins 8-bit PIC.
    3. 2 x programmable switch.
    4. 2 x programmable LED indicator.
    5. Changeable Crystal – default 10MHz.
    6. Existing pad for 16 x 2 characters LCD display.
    Read more
  • Cytron 40 pins PIC Start-Up Kit SK40C

    SKU: 10095
     829.00

    (inc GST)

    ₹ 702.54 (+18% GST extra)

    1. ICSP connector for UIC00B -simple and fast method to load program.
    2. Perfect fit for 40 pins PIC16F and PIC18F.
    3. Operating Voltage Range: 7V – 15VDC
    4. 2 x programmable switch.
    5. 2 x LED indicator.
    6. Exchangeable Crystal.
    7. Existing pad for 16 x 2 characters LCD display.
    8. UART connection to interface with other controller or even computer.
    Add to cart
  • 40 pins PIC Start-Up Kit Combo 2 SK40C + PIC18F4550 (SK40C2)

    SKU: 10105
     1,459.00

    (inc GST)

    ₹ 1236.44 (+18% GST extra)

    1. ICSP connector for UIC00B -simple and fast method to load program.
    2. Perfect fit for 40 pins PIC16F and PIC18F.
    3. 2 x programmable switch.
    4. 2 x LED indicator.
    5. Exchangeable Crystal.
    6. Existing pad for 16 x 2 characters LCD display.
    7. UART connection to interface with other controller or even computer.
    8. USB on board for certain PIC18F.
    Add to cart
  • CIKU PIC PIC18F4550 based Arduino form factor starter kit

    SKU: 10107
     1,249.00

    (inc GST)

    ₹ 1058.47 (+18% GST extra)

    1. Comes with pre-programmed PIC18F4550 with USB bootloader.
    2. PIC18F4550 running at 48MHz (after PLL with 10MHz external crystal).
    3. Power via USB or external DC adapter (7 – 12V).
    4. On board 5V 800mA (Max 1A) voltage regulator.
    5. On board 3.3V 500mA (Max 500mA) voltage regulator.
    6. USB mini-B receptor for USB connection.
    7. 20 digital I/O pins.
    8. 6 analog input pin.
    9. 2 PWM output pin.
    Add to cart
  • Olimex Duinomite-Mini PIC32MX795 PIC 32Bit

    SKU: 11133
     2,913.00

    (inc GST)

    ₹ 2468.64 (+18% GST extra)

    1. PIC32MX795 microcontroller
    2. micro SD card
    3. USB connector
    4. VGA connector
    5. PS-2 keyboard connector
    6. Arduino like format i.e. can work with Arduino shields
    7. UEXT connector i.e. can work with all our modules
    Browse Wishlist
    Read more
  • Olimex DUINOMITE-IO

    SKU: 11176
     724.00

    (inc GST)

    ₹ 613.56 (+18% GST extra)

    1. PS-2 connector
    2. Audio jack 3.5 mm connector
    3. Composite Video and Audio for RCA jacks
    4. VGA monitor connector
    5. 10 pin IO connector for Duinomite with cable
    6. A small ribbon cable with IDC10 connectors on both ends
    Add to cart
  • Olimex PIC32-PINGUINO-OTG ARDUINO like PIC32MX440F256H USB-OTG

    SKU: 11194
     3,139.00

    (inc GST)

    ₹ 2660.17 (+18% GST extra)

    1. PIC32MX440F256H 80 Mhz microcontroller 256KB Flash 32KB RAM
    2. DC power supply allows power supply voltage from 9 to 30V DC
    3. Carefully selected, all of the components work reliably in the INDUSTRIAL temperature range -25+85C.
    4. ULTRA LOW POWER voltage regulators and the consumption is only a few microamps
    5. microSD card for data logging
    6. Allows RTC – Real Time Clock.
    7. NOISE IMMUNE design.
    Read more
  • Olimex PIC32-PINGUINO-MICRO ARDUINO like PIC32MX440F256H USB OTG

    SKU: 11189
     1,890.00

    (inc GST)

    ₹ 1601.69 (+18% GST extra)

    1. PIC32MX440F256H 80 Mhz microcontroller 256KB Flash 32KB RAM
    2. MicroSD card for data logging
    3. UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
    4. Two LEDs
    5. One BUTTON
    6. RESET button
    7. A Mini USB connector is used, which is common and used in most cell phones, so you do not have to buy other cables
    8. All PIC ports available on 0.1″ connectors
    Read more
  • Olimex PIC32-PINGUINO-MX220

    SKU: 28199
     1,459.00

    (inc GST)

    ₹ 1236.44 (+18% GST extra)

    1. PIC32MX220F032D 32 bit, 40 Mhz microcontroller 32KB Flash 8KB RAM
    2. Ultra Low Power design
    3. Li-Po battery connector for hand-held applications
    4. UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
    5. Two LEDs
    6. One USER BUTTON
    7. RESET button
    Read more
  • PICkit3 PIC KIT3 Debugger Programmer Emulator Controller Development Board

    SKU: 28352
     1,140.00

    (inc GST)

    ₹ 966.1 (+18% GST extra)

    1. Full-speed USB support using Windows standard drivers
    2. Real-time execution
    3. Processors run at maximum speeds
    4. Built-in over-voltage/short circuit monitor
    5. Low voltage to 5V (1.8 to the 5V range)
    6. Read/write program and data memory of the microcontroller
    7. Program up to 512K byte flash.
    Add to cart
  • PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable

    SKU: 43286
     580.00

    (inc GST)

    ₹ 491.53 (+18% GST extra)

    1. Support the most popular programming PIC chips, read, encryption and other features!
    2. No external power supply, communication, and power is only a USB cable to print complete, without any cable.
    3. PICSTARTPLUS much faster rate than programming.
    4. Can easily read the contents of the chip program area.
    5. Automatic programming verification.
    6. Comprehensive information prompts, allowing users to understand the working state.
    Add to cart
  • PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board

    SKU: 43671
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    The PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board is designed to work in conjunction with the popular PICkit 2 or PICkit3 programmer.

    Add to cart
  • ATMEGA16 ATmega 32 ISP AVR Minimum Development System Board Module

    SKU: 43675
     249.00

    (inc GST)

    ₹ 211.02 (+18% GST extra)

    1. 32 I/O pin all the leads.
    2. Classic ATmega16 minimum system, eliminating the hassle of soldering.
    3. Support chips: ATmega16/ATmega32 and chip which pin-compatible.
    4. Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
    5. DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
    6. Reset: Power-on-reset and reset button.
    7. Power LED (D1) and the program run indicator (D2).
    8. Standard ISP download interface.
    Read more
  • SmartElex IOIO OTG for Android

    SKU: 86932
     1,925.00

    (inc GST)

    ₹ 1631.36 (+18% GST extra)

    1. Recommended Input Voltage: 12V
    2. Input Voltage Range: 5-15V
    3. 2 Pin 2mm SMD JST Right-angle Connector for Input supply
    4. On-board TPS62133RGTT Synchronous step down DC-DC converter.
    5. Power Status LED (RED)
    6. Micro USB for Communication with Android.
    7. One start LED connected to boot pin (RC12 =Pin no. 39).
    8. User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
    Add to cart
  • SmartElex AT89S52 Development Board with LCD

    SKU: 464732
     1,329.00

    (inc GST)

    ₹ 1126.27 (+18% GST extra)

     

    1. Onboard 5V regulator (78M05) circuit.
    2. On-Board power supply on-off switch
    3. On-Board DC motor Driver L298P
    4. On-Board 4×4 Matrix Keypad.
    5. On-Board 4 bit 16×2 LCD Display.
    6. 0592MHz crystal.
    7. Port extensions for all ports with detailed pin labelling for easy identification of pins
    8. Onboard USB TO Serial – CH340 Chip.
    9. On-board Micro USB USBASP for loading HEX file.
    Read more