Browse the category of potentiometer where can find your desired variable resistance potentiometer. Here you will get the variety of potentiometers like Slider pot to equalize the resistance, trim pots for PCB or Breadboard prototyping, shaft potentiometer for your audio amplifier, or single-turn potentiometers, etc.
Potentiometer
Showing all 45 results
-
Potentiometer
Green 7 Decade 1R – 9999999R Programmable Resistor Resistance Board Module
SKU: 975768- Design based on the “resistors series” theorem.
- 1/2 watt tolerance +/-1% SMD resistors.
- Screw terminal blocks easy to connect wires.
- High-quality FR4 glass fiber PCB.
- With spare parts 10 pieces jumper caps (onboard 7 pieces, total 10 pieces).
- Programmable Resistance: 0 to 9,999,999 ohm, 1 ohm per step.
- Resistance Tolerance: +/-1%
SKU: 975768 -
Potentiometer
100kΩ 0.2W 6 Pin 2 Gang Rotary Carbon Potentiometer (15mm)
SKU: 872023- Potentiometer Type: Rotary
- Maximum Resistance: 100kΩ
- Number of Gangs: 2
- Number of Turns: 1
- Power Rating: 0.2W
- Electrical Taper: Linear
- Element Material: Carbon
- Mounting Type: Panel Mount
- Termination Style: PC Pin
- Shaft Length: 15mm
- Shaft Diameter: 6 mm
- Tolerance: ±20%
- Actuator Type: Knurled Shaft
SKU: 872023 -
Potentiometer
10kΩ 0.2W 6 Pin 2 Gang Rotary Carbon Potentiometer (15mm)
SKU: 872025- Potentiometer Type: Rotary
- Maximum Resistance: 10kΩ
- Number of Gangs: 2
- Number of Turns: 1
- Power Rating: 0.2W
- Electrical Taper: Linear
- Element Material: Carbon
- Mounting Type: Panel Mount
- Termination Style: PC Pin
- Shaft Length: 15mm
- Shaft Diameter: 6.35 mm
- Tolerance: ±20%
- Actuator Type: Knurled Shaft
SKU: 872025 -
-
-
-
-
-
-
-
-
Potentiometer
5kΩ 0.4W 6 Pin 2 Gang Rotary Carbon Potentiometer (15mm)
SKU: 872024- Potentiometer Type: Rotary
- Maximum Resistance: 5kΩ
- Number of Gangs: 2
- Number of Turns: 1
- Power Rating: 0.4W
- Electrical Taper: Linear
- Element Material: Carbon
- Mounting Type: Panel Mount
- Termination Style: PC Pin
- Shaft Length: 15mm
- Shaft Diameter: 6 mm
- Tolerance: ±20%
- Actuator Type: Knurled Shaft
SKU: 872024 -
Potentiometer
DC 3-5V X9C103S Digital Potentiometer Board Module for Arduino
SKU: 43886- Supply voltage: 3V-5V
- Chip: X9C103S
- Dimensions : 28 x 14 x 4 (LxWxH) mm.
- 10K span potentiometer.
- Potentiometer center tap between the 0-10k slide in total 100 (potentiometer wiper typical impedance 40 ohms)
SKU: 43886 -
Potentiometer
Digital Potentiometer 100kΩ (MCP4261-502E / ST TSSOP)
SKU: 872050- End To End Resistance: 100k ohm
- No. of Pots: Dual
- Control Interface: SPI
- Track Taper: Linear
- Resistance Tolerance: ± 20%
- Supply Voltage Min: 2.7V
- Supply Voltage Max: 5.5V
- Potentiometer IC Case Style: TSSOP
- No. of Pins: 14Pins
- No. of Steps: 257
- Temperature Coefficient: ± 150ppm/°C
- Operating Temperature: -40°C to 125°C
- Automotive Qualification Standard: AEC-Q100
SKU: 872050 -
