Explore our category page dedicated to Interface ICs, where you will find a wide selection of ICs designed to facilitate seamless communication and connectivity in various applications. Discover popular options such as Ethernet switch ICs, USB ICs, RS485 ICs, USB to UART ICs, RS232 ICs, UART ICs, and USB to Ethernet ICs.
These ICs play a crucial role in interfacing different devices, enabling data transfer, signal conversion, and protocol translation. Whether you need to establish network connections, connect USB devices, or convert between different communication standards, our range of interfacing ICs has you covered. Browse our collection and find the perfect ICs for your connectivity needs.
Interface ICs
Showing 1–48 of 65 results
-
Interface ICs
CH340G SOIC16 USB to Serial TTL-RS232 converter IC
SKU: 162175- ull speed USB device interface, conforms to USB Specification Version 2.0, only needs crystal and
capacitance external. - Emulate standard serial interface, used to upgrade the former peripheral device, or add excess serial
interface through USB. - Totally compatible with the serial application program in a computer endpoint Windows operation system.
- Hardware full duplex serial interface, set transceiver buffer, supports communication baud rate varies
from 50bps to 2Mbps. - Supports common MODEM liaison signal RTS, DTR, DCD, RI, DSR and CTS.
- Through adding level converter equipment to supply RS232, RS485, RS422 and another interface.
- Supports IrDA criterion SIR infrared communication, supports baud rate varies from 2400bps to
115200bps.
SKU: 162175 - ull speed USB device interface, conforms to USB Specification Version 2.0, only needs crystal and
-
-
Interface ICs
Ft232Rl Ssop-28 Usb Interface IC
SKU: 162012- Single chip USB to asynchronous serial data transfer interface
- Entire USB protocol handled on the chip – No USB-specific firmware programming required
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits & odd/even/mark/space/no parity
- Fully assisted hardware or X-On / X-Off software handshaking
- In-built support for event characters and line break condition
- New USB FTDIChip-ID™ feature
- New configurable CBUS I/O pins
- Auto transmit buffer control for RS485 applications
- Transmit and receive LED drive signals
SKU: 162012 -
Interface ICs
MAX232CSE SOIC-Narrow-16 RS-232 Interface IC (Pack of 2 ICs)
SKU: 162018- Operates With Single 5-V Power Supply
- LinBiCMOS Process Technology
- Two Drivers and Two Receivers
- ±30-V Input Levels
- Low Supply Current . . . 8 mA Typical
- Meets or Exceeds TIA/EIA-232-F and ITURecommendation V.28
- Designed to be Interchangeable WithMaxim MAX232
SKU: 162018 -
Interface ICs
ADS1115IDGST – 16-Bit 860SPS 4-Ch Delta-Sigma ADC PGA Oscillator Vref Comparator I2C 10-Pin VSSOP (Texas Instruments)
Interface ICsADS1115IDGST – 16-Bit 860SPS 4-Ch Delta-Sigma ADC PGA Oscillator Vref Comparator I2C 10-Pin VSSOP (Texas Instruments)
SKU: 1072495- Wide Supply Range: 2.0 V to 5.5 V
- Low Current Consumption: 150 μA
- Programmable Data Rate:8 SPS to 860 SPS
- 2C Interface: Four Pin-Selectable Addresses
SKU: 1072495 -
Interface ICs
PL2303HX SSOP28 USB-to-Serial Bridge Controller IC
SKU: 162173- Fully Compliant with USB Specification v2.0 (Full-Speed)
- Extensive Flow Control Mechanism
- Configurable 512-byte bi-directional data buffer
- Supports remote wake-up from MODEM input signals
- Two general purpose I/O (GPIO) pins
- Optional external EEPROM for startup device configurations
SKU: 162173 -
Interface ICs
MAX232CPE PDIP-16 RS-232 Interface IC (Pack of 2 ICs)
SKU: 162015- Operates With Single 5V Power Supply
- LinBiCMOS Process Technology
- Two Drivers and Two Receivers
- ±30-V Input Levels
- Low Supply Current . . . 8 mA Typical
- Meets or Exceeds TIA/EIA-232-F and ITURecommendation V.28
- Designed to be Interchangeable WithMaxim MAX232
SKU: 162015 -
Interface ICs
SN75176N RS-422/RS-485 Interface IC DIP-8 Package
SKU: 1072509- Supply Voltage(VCC): 7V
- Control Input Voltage: 7V
- Driver Input Voltage: 7V
- Driver Output Voltages: +15V/ −10V
- Receiver Input Voltage (DS75176B): +15V/ −10V
- Receiver Output Voltage: 5.5V
- Storage Temperature Range :−65°C to +150°C
SKU: 1072509 -
Interface ICs
PL2303HX SSOP28 USB-to-Serial Bridge Controller IC (Revision A)
SKU: 557997- Fully Compliant with USB Specification v2.0 (Full-Speed).
- On-Chip USB 1.1 transceiver, 5V ~ 3.3V regulator, and 12 MHz crystal oscillator.
- Supports RS232-like Serial Interface.
- Configurable 512-byte bi-directional data buffer.
- Supports remote wake-up from MODEM input signals.
- Two general-purpose I/O (GPIO) pins.
- Small footprint 28-pin SSOP IC package.
- RoHS compliant.
SKU: 557997 -
Interface ICs
MCP4802-E/P 8 Bit Dual Voltage Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
Interface ICsMCP4802-E/P 8 Bit Dual Voltage Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
SKU: 1072500- Fast Settling Time of 4.5 µs
- Selectable Unity or 2x Gain Output
- 2.048V Internal Voltage Reference
- 50 ppm/°C VREF Temperature Coefficient
- 2.7V to 5.5V Single-Supply Operation
- Extended Temperature Range: -40°C to +125°C
SKU: 1072500 -
Interface ICs
MCP4821T-E/MS 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
Interface ICsMCP4821T-E/MS 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
SKU: 1072501- Analogue Supply Voltage: 2.7 V to 5.5 V
- Digital Supply Voltage: 2.7 V to 5.5 V
- Product Category: Digital to Analog Converters – DAC
- Resolution: 12 bit
- Number of Channels: 2 Channel
- Settling Time: 4.5 us
SKU: 1072501 -
