An Audio Module is a distinct piece of audio processing logic performing a relatively atomic function. An audio module may reside in the audio driver or in audio DSP. Audio playback components. An audio system typically consists of one or more source components, one or more amplification components, and (for stereo) two or more loudspeakers.
Signal cables (analog audio, speaker, digital audio etc.) are used to link these components. It includes devices like Amplification Module, Voice Sound Audio Player Module, Recording Module, Stereo FM Radio Module and many more module. You can easily get this all component here.
Audio Module/ Amplifier
Showing 1–48 of 74 results
-
Audio Module/ Amplifier
2*80W+100W Bluetooth 5.0 APTX-HD TPA3116D2 Power Amplifier Board 2.1 TPA3116 PCM5102A DAC Audio NE5532 Equalizer Class D Amp
Audio Module/ Amplifier2*80W+100W Bluetooth 5.0 APTX-HD TPA3116D2 Power Amplifier Board 2.1 TPA3116 PCM5102A DAC Audio NE5532 Equalizer Class D Amp
SKU: 1031022- Input voltage: DC12-24V
- Amp Chip: TPA3116D2
- Output impedance:4~8 ohm Speaker
- Current: ≥3A
- Output power: 80W*2
- Adopt a TPA3116D2 high-performance power amplifier chip.
- With total volume, subwoofer volume, and stereo volume control knobs.
SKU: 1031022 -
Audio Module/ Amplifier
2x6W DC 5V 3.7V speaker modified Stereo Bluetooth amplifier board can connected lithium battery
Audio Module/ Amplifier2x6W DC 5V 3.7V speaker modified Stereo Bluetooth amplifier board can connected lithium battery
SKU: 1150679- Item Type: Amplifier Board
- Model: HF69B
- Supply Voltage: 5VDC or 3.7V lithium battery
- Applicable Speaker Impedance: 4 ohms, 6 ohms, 8 ohms
- Charging Interface: When using a lithium battery, the charging interface can be charged with a 5 volt power supply or a mobile phone charger to charge a single lithium battery.
SKU: 1150679 -
-
-
Audio Module/ Amplifier
DFRobot DFPlayer – A Mini MP3 Player
SKU: 1495694- Sampling rates (kHz): 8/11.025/12/16/22.05/24/32/44.1/48
- 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB
- Fully supports FAT16 , FAT32 file system, maximum support 32G of the TF card, support 32G of U disk, 64M bytes NORFLASH
- A variety of control modes, I/O control mode, serial mode, AD button control mode
SKU: 1495694 -
-
Audio Module/ Amplifier
High Accuracy AD623 Programmable Gain Digital DC Instrument Amplifier Board Module
Audio Module/ AmplifierHigh Accuracy AD623 Programmable Gain Digital DC Instrument Amplifier Board Module
SKU: 975771- Gain range: 1 to 1000
- Noise: 35 nV/√Hz RTI noise at 1 kHz
- Single- or dual-supply instrumentation amplifier
- Low power, 550 μA maximum supply current
- 20 μs settling time to 0.01% (G = 10)
SKU: 975771 -
Audio Module/ Amplifier
JQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
Audio Module/ AmplifierJQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
SKU: 1150757- MP3 file format:
- support all bit rate 11172-3 and ISO13813-3 layer3 audio decoding
- Sample rate support (KHZ): 8/11.025/12/16/22.05/24/32/44.1/48
- support Normal, Jazz, Classical, Pop, Rock and other sound effects
- UART interface: standard serial port, TTL level, baud rate can be set
- Input voltage: 3.2V-5V (best 4.2V);
- Rated current: 20ma
SKU: 1150757 -
-
Audio Module/ Amplifier
SeeedStudio Grove Recorder v3.0
SKU: 1135217- Working Voltage: 3.â…—V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
SKU: 1135217 -
Audio Module/ Amplifier
Sipeed MAIX R6+1 Microphone Array
SKU: 1147656- Brand: Seeed Studio
- Supply voltage: 3.3V +-0.2V
- Sound Pressure Level: 140 dB SPL
- Sensitivity: -26(dB, dBFS @1kHz 1Pa)
- 6 MEMS microphones: MSM261S4030H0
- Supply current: >750mA(Full brightness)
- Range of working temperature: -30 ~ 85C
SKU: 1147656 -
Audio Module/ Amplifier
TDA8932 Digital Power Amplifier Board 35W Mono High-Power TDA8932 Low Power Consumption
Audio Module/ AmplifierTDA8932 Digital Power Amplifier Board 35W Mono High-Power TDA8932 Low Power Consumption
SKU: 1150781- Module Type:Â TDA8932 35W
- Operating Voltage:Â Single DC10 ~ 30V
- Recommended Voltage: 24V
- Current:Â Above 2A Switching Power Supply
- Output Power:Â 35W x 1
- Speaker Impedance:Â 4-8 ohm, 8 ohm best
- Circuit configuration:Â Mono BTL Output
SKU: 1150781 -
-
Audio Module/ Amplifier
XH-M312 TPA3118D2 45W*2 Digital Amplifier Board Dual Channel Audio Amplifier Board Module
Audio Module/ AmplifierXH-M312 TPA3118D2 45W*2 Digital Amplifier Board Dual Channel Audio Amplifier Board Module
SKU: 1150794- Â Work voltage: DC 12V-28V
- Â IC: TPA3118D2
- Â Power interface: DC 5.5*2.1mm socket
- Â Audio channel: 2CH
- Â Output power: 45W*2
- Â Input current: >3A
- Â Output impedance: 4ohm-8ohm
SKU: 1150794 -
Audio Module/ Amplifier
5.1 channel USB Sound Card for Raspberry Pi and Computers
SKU: 815865- Plug and Play device no software installation needed
- Easy and portable
- Works and all major operating systems
- Supports 5.1 Surround and 3D sound
- No external power supply needed
- Boost the signals for Headsets
SKU: 815865 -
Audio Module/ Amplifier
AVR ISP 10 Pin to 6 Pin Adapter Board
SKU: 31145- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side:Â 6.
- Connector type on USBASP side:Â Male.
- Connector type on Device under programming side:Â Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
SKU: 31145 -
Audio Module/ Amplifier
Bluetooth Audio-ontvanger Module Audio Formaten MP3 WMA WAV FLAC Decoderen Board Lossless Bluetooth 4.2 Muziek Module Board
Audio Module/ AmplifierBluetooth Audio-ontvanger Module Audio Formaten MP3 WMA WAV FLAC Decoderen Board Lossless Bluetooth 4.2 Muziek Module Board
SKU: 804004- Excellent durability and coexistence
- Guarantee the stability of Bluetooth transmission through multiple technologies
- Intuitive LED indication
- Bluetooth 4.2 Version
- Wireless transmission distance ≥ 10 meters
- Adopt the latest Bluetooth 4.2 protocol, backward compatible with other versions of Bluetooth protocol
SKU: 804004 -
Audio Module/ Amplifier
Bluetooth MP3 Decoding Board Module with inbuilt SD Card Slot / USB / FM / and Remote Control
Audio Module/ AmplifierBluetooth MP3 Decoding Board Module with inbuilt SD Card Slot / USB / FM / and Remote Control
SKU: 354843- Comes with IR Remote Control
- Stereo Digital Audio Output
- Can be used as an audio receiver
- Support USB/TF Card Slot/Bluetooth/FM/AUX switching, also supports folder selection and playback
- Stereo Bluetooth with a call can also receive hands-free calls
SKU: 354843 -
-
-
Audio Module/ Amplifier
CSR8645 Wireless 4.0 Amplifier Board 5W+5W APT-X Stereo Receiver Amplifier Module
Audio Module/ AmplifierCSR8645 Wireless 4.0 Amplifier Board 5W+5W APT-X Stereo Receiver Amplifier Module
SKU: 699533- The board can be connected to two mobile phones.
- It comes with the call function and the default volume of the largest.
- Can be used for many applications like Bluetooth Headset
SKU: 699533 -
Audio Module/ Amplifier
DC12-24V TPA3116D2 2.1 Channel Digital Subwoofer Power Amplifier Board
SKU: 211241- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
SKU: 211241 -
-
-
Audio Module/ Amplifier
ISD1760 Recording Playback Module
SKU: 16689- Non-volatile message storage using patented multi-level storage (MLS)
- Full range of Record and Playback Durations (40 Seconds to 120 Seconds)
- 4.0 to 12.0KHz Sampling Frequency provides Industry-Leading Sound Quality
- Designed for Message Management
- Single/Multiple messages
- Low Voltage Operation
SKU: 16689 -
-
Audio Module/ Amplifier
MAX4466 Electret Microphone Amplifier with Adjustable Gain Module
SKU: 456204- Supply Voltage Operation: +2.4V to +5.5V.
- Versions with 5nA Complete Shutdown Available only (MAX4467/MAX4468).
- Excellent Power-Supply Rejection Ratio: 112dB.
- Excellent Common-Mode Rejection Ratio: 126dB.
- High AVOL: 125dB (RL = 100kΩ).
SKU: 456204 -
-
-
Audio Module/ Amplifier
Mini SD Card MP3 Sound Module For PIC Arduino WTV020-SD
SKU: 28532- Supports FAT file system SD carrier
- Supports playing of 4Bit ADCPM format files
- Recognize the voice files automatically
- Support microprocessor and key control
- Audio output: 16bitDAC and PWM
- Maximum voice storage: 512 voice
- Operating voltage: DC 2.6 to 3.6V
- Quiescent current: 16 μA (SD card is not inserted)
SKU: 28532 -
Audio Module/ Amplifier
MT8870 DTMF Audio/Speech Decoding Telephone Module
SKU: 407537The MT8870 module is a low power device DTMF decoder chip. It is a complete DTMF receiver integrating both the band-split filter and digital decoding functions. This module is suitable for modem interfaces, mobile radios and other DTMF related applications.
SKU: 407537 -
Audio Module/ Amplifier
Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module
Audio Module/ AmplifierNon-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module
SKU: 52280- Support MP3 format, playing power on automatically.
- When mp3 is played the red LED flashes.
- Support U disk (test 32G), TF Card (test 16G) play mode;Â power on default.
- Buttons can be adjusted up and down to control songs, volume up and down, pause or play, mode switching.
- Press menu button enter the single / all song play mode.
SKU: 52280 -
Audio Module/ Amplifier
PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier
SKU: 33457- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
SKU: 33457 -
Audio Module/ Amplifier
PAM8403 Mini 5V Digital Amplifier Board With Switch Potentiometer
SKU: 44109- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
SKU: 44109 -
Audio Module/ Amplifier
PAM8406 Digital Amplifier Module With Volume Control Potentiometer 5Wx2 Stereo
Audio Module/ AmplifierPAM8406 Digital Amplifier Module With Volume Control Potentiometer 5Wx2 Stereo
SKU: 398264PAM8406 Digital Amplifier Module With Volume Control Potentiometer is an excellent noise suppression module. If you don’t receive input audio, you will not hear any noise on your ears.
SKU: 398264 -
Audio Module/ Amplifier
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire
-19%
Audio Module/ AmplifierPCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire
SKU: 28449- Module chip using PCF8951
- Module supports external voltage input of the 4-way acquisition (voltage input range of 0-5v)
- The module integrated photoresistor by AD collection precise value of the ambient light intensity
- Module integrated thermistor by the precise value of the ambient temperature of the AD acquisition
- Module integrated 1 channel 0-5V voltage input acquisition (the blue potentiometer to adjust the input voltage)
- Modules with power indicator (for the module power supply indicator lights)
- Modules with DA output indicator, when the module DA output interface voltage reaches a certain value, will be lit panel the DA output indicator, the higher the voltage, the more obvious indicator brightness
SKU: 28449 -
-
Audio Module/ Amplifier
TDA2030A 6-12V 18W Audio Amplifier Module
SKU: 815861- Operating voltage: 6 to 12V DC
- Onboard TDA2030A Audio amplifier IC
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- 10 k adjustable resistance to adjust the volume of the amplification
- Onboard power indicator light
- Chip has lead to the main pin, can directly input the audio signal
SKU: 815861 -
Audio Module/ Amplifier
TDA7297 12V Stereo Noiseless Audio Power Amplifier Module with 2 x 15W Output
Audio Module/ AmplifierTDA7297 12V Stereo Noiseless Audio Power Amplifier Module with 2 x 15W Output
SKU: 815874- Can be accessed by two 4-8Ω 10-50W speakers
- A large volume of small size
- High signal to noise ratio
- An upgraded version of the radiator, wider and thicker, better cooling effect
- Fit for Bookshelf speakers, CRT televisions, radios, and other small amplifiers
SKU: 815874
