We have an ST-LINK programmer for STM8 and STM32. ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. The programmer support multiple devices with the same I2C address.MCP2515 CAN Module can find it easy to control any CAN Bus device by SPI interface with your MCU.
Programmers
Showing all 35 results
-
-
Programmers
EZP2019+ High Speed USB SPI Programmer Support 24/25/26/93 Series Chip EEPROM Flash Bios Standard configuration
ProgrammersEZP2019+ High Speed USB SPI Programmer Support 24/25/26/93 Series Chip EEPROM Flash Bios Standard configuration
SKU: 1150751- Material: ABS+PCB
- Type: 1-3 (optional)
- USB interface: USB 2.0 interface
- Support 24/25/26/93 series chips
- Programmer size: 71 * 44 * 19mm
- Programmer weight: 37g
- Package size: 150 * 100 * 38mm
- Package weight: Type 1: 113g
SKU: 1150751 -
Programmers
MICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID
-6%ProgrammersMICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID
SKU: 1470126- Model: MICROCHIP Evaluation Kit, ATSAMD10 MCU
- Free Atmel IDE for development of C/C++ and assembler code for Atmel microcontrollers
- Programming and debugging the ATSAMD10 Xplained Mini
- You can programming the ATmega32U4 Using a Bootloader
- Xplained Pro extension headers can easily be strapped in
SKU: 1470126 -
Programmers
MICROCHIP Evaluation Kit, SAM C21 Xplained Pro, ATSAMC21J18A MCU, On Board Embedded Debugger
-10%ProgrammersMICROCHIP Evaluation Kit, SAM C21 Xplained Pro, ATSAMC21J18A MCU, On Board Embedded Debugger
SKU: 1470127- Model: SAM C21 Xplained Pro, ATSAMC21J18A MCU
- Product: On Board Embedded Debugger
- 3.3 and 5V selectable target voltages
- Level converters between target section and EDBG section
- 32.768kHz Crystal mounted
- 16MHz crystal footprint (not mounted)
SKU: 1470127 -
-
-
-
Programmers
STMICROELECTRONICS Development Board, STM32F302R8T6 MCU, On Board Debugger, Arduino Uno Compatible
ProgrammersSTMICROELECTRONICS Development Board, STM32F302R8T6 MCU, On Board Debugger, Arduino Uno Compatible
SKU: 1470138- Model: STM32F302R8T6 MCU
- Voltage: 3.3V, 5V, 7-12V
- Two push buttons for user and reset
- Three interfaces supported on USB. Virtual Com port, Mass storage and Debug port
- STM32 comprehensive software HAL library
- Supported by Integrated Development Environments (IDEs) including IAR, Keil, GCC based IDEs
SKU: 1470138 -
Programmers
STMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho
ProgrammersSTMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho
SKU: 1470141- USB VBUS or external source (3.3V, 5V, 7 to 12V) and power management access point
- USB communication (LD1), user LED (LD2), power LED (LD3)
- Two push buttons – USER and RESET
- USB re-enumeration capability – virtual com port, mass storage, debug port
- Supported by wide choice of IDEs including IAR, Keil, GCC-based IDEs
SKU: 1470141 -
Programmers
STMICROELECTRONICS Development Board, STM32L432KC MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino Connectivity
ProgrammersSTMICROELECTRONICS Development Board, STM32L432KC MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino Connectivity
SKU: 1470145- Model: STM32L432KC MCU
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- STM32 microcontroller in 32-pin package
SKU: 1470145 -
Programmers
STMICROELECTRONICS Development Kit, STM32F412ZG MCU, ST-LINK/V2-1 Debugger/Programmer, 240×240 Pixel TFT color LCD
ProgrammersSTMICROELECTRONICS Development Kit, STM32F412ZG MCU, ST-LINK/V2-1 Debugger/Programmer, 240×240 Pixel TFT color LCD
SKU: 1470152- 1.54 inch 240×240 pixel TFT color LCD with parallel interface and capacitive touchscreen
- I2S Audio CODEC, with a stereo headset jack, including analog microphone input and a loudspeaker output
- Stereo digital MEMS microphones
- MicroSDÂ Â card connector extension
- I2C extension connector
- 128 Mbit Quad-SPI Nor Flash
SKU: 1470152 -
Programmers
T48 Universal Programmer Kit with 6 IC AdaptersÂ
SKU: 1524476- T48 (TL866-3G) hardware Parameters: 32-bit MCU with 120MHZ, 4-layer PCB Design, USB2.0 HS 480MHZ;
- Volume: 10X6.5X2.8 cm (almost the same as TL866II);
- 16-channel ISP, total 56-channel dedicated IO, 56-channel high-speed high-voltage isolation;
- VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable;
- Power consumption: 5V <500MA.
SKU: 1524476 -
Programmers
TW Link V2 Programmer For STM8 and STM32
SKU: 1268935- Voltage: 5V
- The wiring is very simple because the interface definition is marked directly on the aluminum housing protects
- Internal board of this programmer is with 500MA self-recovery fuse
- It’s convenient and practical, fast speed and stable
- The interface easy to use simple horns seat pitch of 2.54
- Weight: 10g
SKU: 1268935 -
Programmers
ATMEGA16 ATmega 32 ISP AVR Minimum Development System Board Module
SKU: 43675- 32 I/O pin all the leads.
- Classic ATmega16 minimum system, eliminating the hassle of soldering.
- Support chips: ATmega16/ATmega32 and chip which pin-compatible.
- Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
- DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
- Reset: Power-on-reset and reset button.
- Power LED (D1) and the program run indicator (D2).
- Standard ISP download interface.
SKU: 43675 -
Programmers
ICSP Programmer Socket – UIC-S
SKU: 10048-
No external power needed
-
Power Indicator LED on board
-
Fit perfectly with UIC00A and UIC00B
-
Support 18-pin, 28-pin, and 40-pin 8-bit PIC microcontroller.
-
Selector to program 18-pin or 28-pin&40-pin PIC
-
Come with 40-pin ZIF socket for ease of plug and unplug of PIC
SKU: 10048 -
-
Programmers
ICSP Universal Socket
SKU: 10061To ease user, Cytron has created this UIC-A so that user can use any programmer regardless of the development board. For example, a development board which uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
SKU: 10061 -
Programmers
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
SKU: 43820- Support CAN V2.0B technical standard, communication rate 1Mb / S.
- Module 5V DC power supply, SPI interface protocol control
- 0 to 8 bytes long data field.
- 8MHZ crystal oscillator
- 120Ω terminal resistance
- Use High-speed CAN transceiver TJA1050
- Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation
- The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
SKU: 43820 -
-
Programmers
PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 10 mm)
ProgrammersPIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 10 mm)
SKU: 913163- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
- Comprehensive information prompts, allowing users to understand the working state.
SKU: 913163 -
Programmers
PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
ProgrammersPIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
SKU: 43286- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
- Comprehensive information prompts, allowing users to understand the working state.
SKU: 43286 -
Programmers
PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
ProgrammersPIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
SKU: 1378250- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
- Comprehensive information prompts, allowing users to understand the working state.
SKU: 1378250 -
Programmers
PICkit3 Debugger Programmer Emulator Controller Development Board
SKU: 28352- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Program up to 512K byte flash.
SKU: 28352 -
Programmers
ST Link V2 Programmer For STM8 and STM32
SKU: 83581- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
SKU: 83581 -
Programmers
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
SKU: 304904- 5V power supplied by a USB connector
- USB 2.0 full speed compatible interface
- USB standard A to mini B cable
- 1.65V to 5.5V application voltage supported on SWIM interface
- SWIM low speed and high-speed modes supported
SKU: 304904 -
Programmers
TL866A Universal Programmer Kit with 6 IC Adapters
SKU: 781391- Support a wide range of chips:
- All kinds of 26, 27, 28, 29, 37, 39, 49, 50 parallel ROM, EPROM, EEPROM;
- 24, 25, 35, 85, 93, 95 Series EEPROM, Serial parallel ROM chips;
- Fully supporting to the 48-PIN chips of 64Mbits capacity;
- It also supports a variety of models of 51 series of microcontroller,
- AVR microcontroller, including ATMEGA series, ATtiny Series, AT90XXX Series MCU;
- MICROCHIP PIC10 PIC12 PIC16 PIC18 MCU;
- programming of GAL programmable logic device, SRAM test, 54/74, and CMOS4000 series.
- Compatible with Window’s XP, 200/03/07/08/10/Vista
SKU: 781391 -
Programmers
TL866II Plus Universal Programmer Kit with 6 IC Adapters
SKU: 781392- Model: TL866II Plus
- With Multi-functional ICSP interface
- 40pin ZIF socket, fully automatic, support fast mode SPI
- USB interface for both data transfer and power supply
- With over-voltage and over current protection
- Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
- English Language Support
- It can program faster than another programmer 500%~1000%
SKU: 781392 -
Programmers
USB ICSP PIC Programmer – UIC00B
SKU: 10053- Program most of the +3.3V or +5V PIC
- Compatible with PICkit2’s UART Tool and Logic Tool
- The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
-
Compatible with Windows XP, Vista, 7, 8 and 8.1.
-
Compatible with Microchip’s PICkit 2.
-
Powered directly from the USB port.
-
NO EXTERNAL POWER REQUIRED for UIC00B to function.
-
Compatible with PICkit2’s Logic Tool and UART Tool.
SKU: 10053
