Operate your project wirelessly embedding it with Bluetooth. We carry a differential range of Bluetooth transmitter and Receiver modules which can be used for short-distance wireless Audio transmission or you can control your robots from your mobile device over Bluetooth.
Its communication is via serial communication which makes an easy way to interface with controller or PC.
Bluetooth and NRF Modules
Showing all 33 results
-
Bluetooth and NRF Modules, Compatible with Arduino Boards
BLE Nano Integrated CC2540, Bluetooth Module with, Soldering
Bluetooth and NRF Modules, Compatible with Arduino BoardsBLE Nano Integrated CC2540, Bluetooth Module with, Soldering
SKU: 1121280BLE chip: TICC2540Working channel: 2.4GInterface: Micro-USBInput voltage: Micro-USB power supply, Vin6~12V, 5VMicroprocessor: ATmega328P-MU QFN32Bootloader: Latest arduino1.8.8Pin: two rows 2.54mm-15PinSKU: 1121280 -
Bluetooth and NRF Modules
HC-02 6pin Bluetooth Module Compatible with HC-05 / HC- 06
SKU: 1150754- Working Frequency:Â 2.4G
- Communication Interface:Â UA pin 3.3V TTL level
- Input Voltage: 3.2Â ~ 6V
- Operating Voltage: 3.0 ~ 3.6V
- Communication Level:Â 3.3V
- Transmitted Power: 6dBm (max)
- Reference Distance: 10m
- Air Data Rate: 2Mbps
SKU: 1150754 -
Bluetooth and NRF Modules
HC-02 Wireless Bluetooth Module without Baseplate Compatible with HC-05 / HC- 06
Bluetooth and NRF ModulesHC-02 Wireless Bluetooth Module without Baseplate Compatible with HC-05 / HC- 06
SKU: 1150755- Supply voltage: 3.2 – 6V DC
- Signal voltage: 3.2 – 6V DC
- Range: ~10m (in open air)
- LED indication present (indicates status of Bluetooth connection)
- Interface: UART (RX and TX)
- Baud rate in standard modes: 9600 (adjustable)
SKU: 1150755 -
Bluetooth and NRF Modules
RF Nano Integrated NRF24L01 Wireless Module.
SKU: 1121399- Microcontroller: ATmega328P
- Â Nrf24L01+ 2.4G wireless
- Â Architecture AVR
- Â Operating Voltage 5 V
- Â Flash Memory 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Â Clock Speed: 16 MHz
- Â Analog I/O: 8 Pins
- Â EEPROM 1 KB
- Â DC Current per I/O Pins: 40 mA (I/O Pins)
- Â Input Voltage: 7-12 V
- Â Digital I/O: 22 Pins
- Â PWM Output: 6
- Â Power Consumption: 19 m
SKU: 1121399 -
-
Bluetooth and NRF Modules
TTGO T-Beam V1.1 ESP32 LORA 433MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
Bluetooth and NRF ModulesTTGO T-Beam V1.1 ESP32 LORA 433MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
SKU: 1031139-
Working voltage: 1.8~3.7v
-
Acceptable current：10~14mA
-
Transmit current: [email protected]+20dBm,[email protected]+17dBm,[email protected]+13dBm
-
Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
-
Transmit power: +20dBm
- 4MB flash memory,
- Low voltage detection, and temperature sensor,
- Fast wake-up and frequency hopping LED signal indicator, and battery with data backup.
SKU: 1031139 -
-
Bluetooth and NRF Modules
TTGO T8 V1.7 ESP32 8MB PSRAM TF CARD 3D ANTENNA WiFi &, Bluetooth ESP32-WROVER-Unsoldered
Bluetooth and NRF ModulesTTGO T8 V1.7 ESP32 8MB PSRAM TF CARD 3D ANTENNA WiFi &, Bluetooth ESP32-WROVER-Unsoldered
SKU: 1031137- Brand Name: TTGO
- Model Number: TTGO T8 V1.7 ESP32
- Compatible Audio and Video Equipment Style: Amplifier
- Weight:9.5g
- Lastest ESP32 Version: REV1
- WIFI & Bluetooth
- 4MB Flash & 8MB PSRAM
SKU: 1031137 -
Bluetooth and NRF Modules
Ubertooth One: Wireless Bluetooth Development Platform
SKU: 1051959- 2.4 GHz Transmit and Receive.
- Transmit power and receive sensitivity comparable to a Class 1 Bluetooth device.
- Standard Cortex Debug Connector (10-pin 50-mil JTAG)
- In-System Programming (ISP) Serial Connector
- Expansion connector intended for inter-Ubertooth communication or other future uses.
- Six Indicator LEDs
SKU: 1051959 -
-
-
-
Bluetooth and NRF Modules
HC-05 4pin Bluetooth Module(Master/Slave) with Button
SKU: 617819- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: 617819 -
-
Bluetooth and NRF Modules
HC-05 TTL Bluetooth Transceiver Module (Without Button)
SKU: 18596- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes
- Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support
- Incredible small size with 3.3V input, and RoHS Compliant
- UART interface and with baud rate setup function
SKU: 18596 -
-
Bluetooth and NRF Modules
HC-06 4pin Bluetooth Module (Slave) No Button
SKU: 617844- Bases at CSR BC04 Bluetooth technology.
- with build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
- Operating current in pairing is in the range of 30~40mA.
SKU: 617844 -
Bluetooth and NRF Modules
HC-06 6Pin Bluetooth Module Without Button
SKU: 617857- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
SKU: 617857 -
Bluetooth and NRF Modules
HC-08 4pin Bluetooth Module without Button
SKU: 617880- Bluetooth protocol: V4.0 BLE
- 80 meters of extreme Open space distance communication.
- Based on TI CC2540 chipset
- Bluetooth class 2
- Â Support for on-board applications
-  Operating frequency: 2.4 GHz ISM band
- Â Modulation method: GFSK (Gaussian Frequency Shift Keying
SKU: 617880 -
-
-
Bluetooth and NRF Modules
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
SKU: 51733- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- USB Protocol: USB V2.0
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
SKU: 51733 -
Bluetooth and NRF Modules
HM-BT4502 Bluetooth Low Energy (BLE) Pass-through Module
SKU: 755016- Universal serial port design, full-duplex two-way communication, minimum baud rate support 9600 bps
- Default connection interval is 30 millisecond, fast connection
- Support 2M symbol transmission and 244 bytes packet transmission
- Support AT commands for basic settings
SKU: 755016 -
-
-
-
-
