Development Board/Kit
Showing all 37 results
-
Development Board/Kit
AC90-250V ESP8266, Wireless WIFI Relay, Module 1 Channel ESP-, 12F Wifi Development, Board AC/DC 5V/7-28V/5-, 80V Power Supply
Development Board/KitAC90-250V ESP8266, Wireless WIFI Relay, Module 1 Channel ESP-, 12F Wifi Development, Board AC/DC 5V/7-28V/5-, 80V Power Supply
SKU: 1121273- Onboard Mature and stable ESP-12F WiFi module, high capacity 4M Byte Flash
- The I/O port of the WiFi module and the UART program download port are all extracted, convenient secondary development
- Onboard AC-DC switch power module, supply power way support AC90-250V/DC7-12V/USB5V
- Onboard  Wifi module RST reset button
- ESP-12F support use Eclipse/Arduino IDE etc.
SKU: 1121273 -
-
-
-
Development Board/Kit
DFRobot Beetle ESP32 – C3 (RISC-V Core Development Board)
SKU: 1254403- Small size of 25*20.5 mm
- Onboard Lithium charging management function, safer charging and discharging
- Comes with expansion board, more convenient to make projects or use with a screen
- RISC-V 32bit core
- Support WiFi and Bluetooth 5(LE) dual-mode communication
SKU: 1254403 -
Development Board/Kit
DFRobot FireBeetle 2 ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth)
SKU: 1073417- WiFi+Bluetooth 4.0 Dual-mode Module
- GDI Display Port, easy to connect
- Operating Voltage: 3.3V
- Input Voltage: 3.3V~5.5V
- Support Low-Power: 10uA
- ESP32 Dual-core low power main controller, 10uA power consumption
SKU: 1073417 -
Development Board/Kit
DFRobot FireBeetle ESP32 IoT Microcontroller (Supports Wi-Fi & Bluetooth)
SKU: 1073419- Working voltage: 3.3V
- Input voltage: 3.3V~5V
- Support electric current of low power consumption: 10 μA
- Support maximum discharge current: 600mA
- Quick Response(the top frequency is 400KHz)
- Cost-effective
- Small size, convenient to install
SKU: 1073419 -
Development Board/Kit
JTAGulator with JTAG Exploitation Learning kit
SKU: 1051958- 24 I/O channels with input protection circuitry
- Adjustable target voltage: 1.2 V to 3.3 V
- Supported target interfaces (as of firmware v1.1): JTAG/IEEE 1149.1, UART/asynchronous serial
- USB interface for direct connection to the host computer
SKU: 1051958 -
Development Board/Kit
M5STACK FIRE IoT Development Kit (PSRAM 2.0)
SKU: 945399- ESP32: 240MHz dual-core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual-mode Bluetooth
- Flash Memory: 16MB
- PSRAM: 4MB
- Power Input: 5V @ 500mA
- IPS Screen: 2 inch, 320×240 Colorful TFT LCD, ILI9342C, max brightness 853nit
- MEMS: BMM150 + MPU6886
SKU: 945399 -
-
-
-
-
-
-
Development Board/Kit
GAPUINO GAP8 Developer Kit with RISC-V Processor
SKU: 921007- Fabric controller core: 16 kB data and 1 KB instruction cache.
- Cluster: 64 kB shared data and 4 kB shared instruction cache.
- All cores support the same extended RISC-V ISA. Extended instructions include SIMD vector, DSP, bit manipulation, etc.
- Multi-channel 1D/2D DMA.
- Specialized multi-channel micro DMA for autonomous peripheral support.
- Programmable Voltage Regulator.
- Real-Time Clock.
SKU: 921007 -
Development Board/Kit
LinkIt Connect 7681 – Wi-Fi HDK for IoT
SKU: 336555- Chipset Core: MT7681 ANDES N9
- Clock Speed: 80MHz
- Flash: 1MB, RAM: 64KB
- Power: on-board 1A 3.3V voltage regulator (can be powered from USB connector)
- Connectors: UART/GPIO/SPI pins are available on connectors (100mil/2.54mm pitch), micro USB connector.
- GPIO Voltage: 3.3V
- PWM Output pin Count: 5
- PWM levels: 0~20
- UART Voltage: 3.3V
- Wi-Fi Spec: 802.11 b/g/n for Station mode; 802.11 b/g for AP mod
SKU: 336555 -
-
-
-
-
Development Board/Kit
SeeedStudio LinkIt Smart 7688 Duo
SKU: 672585- 580 MHz MIPS CPU
- Single input single output(1T1R) Wi-Fi 802.11 b/g/n (2.4G)
- Pin-out for GPIO, I2C, SPI, SPIS, UART, PWM, and Ethernet Port
- 32MB Flash and 128MB DDR2 RAM
- USB host
- Micro SD slot
- Support for Arduino (ATmega32U4)
SKU: 672585
