GSM / GPRS
Connect your project with the Cellular network with the help of the GSM GPRS module. Embedding these modules to your application lets you add location-tracking, voice, text, SMS, and data to your project in an adorable little package. These modules come in shield form which can be easily interfaced with development board like Arduino and Raspberry Pi.
-
SmartElex GSM HAT for Raspberry Pi
₹ 1,490.00(inc GST)
₹ 1262.71 (+18% GST extra)
- Based on the Quectel M66 Module
- Send/Receive SMS
- Make/Receive voice call with 3.5mm audio jack.
- Quad-band module (850/ 900/ 1800/ 1900MHz).
- Include Onboard Bluetooth BT 3.0 with an antenna.
- Controlled via AT commands.
- Compatible with all Raspberry Pi Version
- Autobauding 4800bps to 115200bps.
-
SIM800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band with Antenna
₹ 1,199.00(inc GST)
₹ 1016.1 (+18% GST extra)
- Network support: Quad-Band 850/900/1800/1900 MHz – works on GSM networks in all countries across the world.
- TTL serial interface compatible with 3.3V and 5V MCU
- the small size is suitable for all kinds of sleeve belt type and embedded.
- Power supply: 5 -20 V.
- Power Interface: 2.54 mm Pin header or MICRO USB interface.
-
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
₹ 299.00(inc GST)
₹ 253.39 (+18% GST extra)
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
-
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
₹ 1,099.00(inc GST)
₹ 931.36 (+18% GST extra)
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
-
SIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board Raspberry Pi Compatible
₹ 5,999.00(inc GST)
₹ 5083.9 (+18% GST extra)
- Multi-band LTE-FDD/LTE-TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in LCC type
- Supports LTE CAT1 up to 10Mbps for downlink & 5Mbps for uplink data transfer
- Designed in the compact and unified form factor
- Compatible with SIMCom HSPA+ SIM5360 module/LTE CAT3 SIM7100 and LTE CAT4 SIM7600E-H module
-
SAM Head Sucker Antenna for SIM900A SIM908 Board GSM Antenna
₹ 250.00(inc GST)
₹ 211.86 (+18% GST extra)
- Frequency range: 800MHz, 900MHz, 1200MHz, 1500MHz, 1800MHz, 1900MHz.
- gain : 7 (dB).
- The antenna height (mm):90
- Cable Length: 2 Meter
- Connector Type:SMA(male)
- Standing wave ratio: ≤1.5
- Input impedance: 50 Ω
-
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
₹ 3,199.00(inc GST)
- Support GPS, COMPASS, Glonass, LBS Base Station Positioning, Omni-Positioning
- Bluetooth 3.0, Supports Data Transferring Through Bluetooth
- Onboard USB To UART Converter CP2102 for UART Debugging
- Compatible With Raspberry Pi Model Zero,3B/3B+,4
-
GSM GPRS SIM808 Module SMS Chip Development Board
₹ 2,499.00(inc GST)
- Quad-band 850/900/1800/1900MHz
- GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
- GPRS mobile station class B
- Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
- Supports charging control for Li-Ion battery
- Supports Real-Time Clock
- Integrated GPS/CNSS and supports A-GPS
- Low power consumption, 10mA in sleep mode
-
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
₹ 249.00(inc GST)
₹ 211.02 (+18% GST extra)
This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.