Arduino Board is most popular amongst student s and the beginner who want to start from the basics of electronics, programming, and coding. We Robu.in selling a variety of Arduino boards including Arduino Uno, mini, Nano, Mega2560, Wemos, Lilypad & Due.
Arduino is an open-source platform used for building electronics projects. Unlike most previous programmable circuit boards, the Arduino does not need a separate piece of hardware (called a programmer) in order to load new code onto the board you can simply use a USB cable.
Boards Compatible with Arduino
Showing 1–48 of 64 results
-
Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
-30%
Boards Compatible with ArduinoUno R3 CH340G ATmega328p Development Board Compatible with Arduino
SKU: 44497- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 44497 -
Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board with Micro-USB
SKU: 1038553- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 1038553 -
Boards Compatible with Arduino
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
-28%Boards Compatible with ArduinoNano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
SKU: 16906- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 16906 -
Boards Compatible with Arduino
Nano R3 W/O USB Cable Compatible with Arduino (Soldered)
SKU: 1588183- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel MEGA328PB-U (Nano)
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 1588183 -
Boards Compatible with Arduino
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
-30%Boards Compatible with ArduinoNano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
SKU: 30888- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: 30888 -
-
Boards Compatible with Arduino
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
-62%Boards Compatible with ArduinoNano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
SKU: 7146- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 7146 -
Boards Compatible with Arduino
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
-62%Boards Compatible with ArduinoNano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
SKU: 42940- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 42940 -
Boards Compatible with Arduino
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
SKU: 43195- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: 43195 -
Boards Compatible with Arduino
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
Boards Compatible with ArduinoPro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
SKU: 110787- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
SKU: 110787 -
-
-
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M (Official Version)
SKU: 11458- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 11458 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
SKU: 31249- Microcontroller: ATmega328
- Circuit Operating Voltage: 3.3V
- Clock frequency: 8MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 31249 -
Boards Compatible with Arduino
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
-54%Boards Compatible with ArduinoUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
SKU: 48065- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 48065 -
Boards Compatible with Arduino
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board
SKU: 699585- The board is compatible with Mega 2560.
- excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
SKU: 699585 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
SKU: 409791- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
SKU: 409791 -
Boards Compatible with Arduino
Mega 2560 ATmega2560-16AU Board without USB Cable for Arduino
SKU: 14135- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: 14135 -
Boards Compatible with Arduino
Mega 2560 ATmega2560-16AU Board plus USB Cable compatible with Arduino
-32%Boards Compatible with ArduinoMega 2560 ATmega2560-16AU Board plus USB Cable compatible with Arduino
SKU: 3349- 54 Digital I/O terminals (14 of which have programmable PWM outputs).
- 16 Analog Inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: 3349 -
Boards Compatible with Arduino
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
SKU: 4657- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 4657 -
Boards Compatible with Arduino
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
-14%Boards Compatible with ArduinoMega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
SKU: 110695It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
SKU: 110695 -
Boards Compatible with Arduino
Atmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
-29%Boards Compatible with ArduinoAtmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
SKU: 48077- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
SKU: 48077 -
Boards Compatible with Arduino
CH376S USB Module U Disk Read Write Module
SKU: 815821- Supply Voltage: 5V
- Internal curing CH376S chip FAT file system, file operations simple and fast
- Support including USB thumb drives, USB hard drives, USB flash drives, and USB storage devices, USB card reader
- Compatible with CH372, host compatible with CH375
SKU: 815821 -
Boards Compatible with Arduino
UNO Based ESP8266 Nodemcu Development Board
SKU: 31279- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
SKU: 31279 -
Boards Compatible with Arduino
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
-39%Boards Compatible with ArduinoUno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
SKU: 48057- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 48057 -
Boards Compatible with Arduino
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
Boards Compatible with ArduinoDue AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
SKU: 3345- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: 3345 -
-
Boards Compatible with Arduino, Wearable Electronic
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
Boards Compatible with Arduino, Wearable ElectronicLilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
SKU: 28446- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: 28446 -
-
-
Boards Compatible with Arduino
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
SKU: 56432- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
SKU: 56432 -
Boards Compatible with Arduino
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
-15%Boards Compatible with ArduinoDue AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
SKU: 31273- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: 31273 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Black- Standard version
SKU: 498153- ATmega328 running at 16MHz with external resonator (0.5% tolerance).
- 100% Arduino compatible board.
- Max Output Current: 150mA.
- 0.8mm Thin PCB.
- USB connection off-board.
- Supports auto-reset.
- Onboard Power and Status LEDs.
SKU: 498153 -
Boards Compatible with Arduino
Mega 2560 Atmega2560-16au compatible with Arduino + Cable + Transparent acrylic case
-31%Boards Compatible with ArduinoMega 2560 Atmega2560-16au compatible with Arduino + Cable + Transparent acrylic case
SKU: 48069- Programmer: Atmel
- ATmega2560 microcontroller.
- 54 digital input/output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
SKU: 48069 -
Boards Compatible with Arduino
Unsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
Boards Compatible with ArduinoUnsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
SKU: 1150789- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
SKU: 1150789 -
Boards Compatible with Arduino
Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
SKU: 221161- It comes with USB and is more convenient to use.
- The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
- Built-in high precision RC, without external crystal oscillator, can be stable operation.
- Less peripheral parts, simple circuit design.
SKU: 221161 -
Boards Compatible with Arduino
Mega R3 Android Accessory Development Kit (ADK) + USB Cable
SKU: 28435- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
SKU: 28435 -
-
-
Boards Compatible with Arduino
Adafruit Feather RP2040
SKU: 1104419- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
SKU: 1104419 -
-
Boards Compatible with Arduino
STMICROELECTRONICS Development Board, STM32 Nucleo-64 MCU, Arduino Uno V3 Connectivity, Flexible Power Supply
Boards Compatible with ArduinoSTMICROELECTRONICS Development Board, STM32 Nucleo-64 MCU, Arduino Uno V3 Connectivity, Flexible Power Supply
SKU: 1470147- Model: STM32 Nucleo-64 MCU
- STM32 microcontroller with LQFP64 package
- USB re-enumeration capability – Three different interfaces
- Voltage: 3.3V, 5V, 7 – 12V
- Applications: Embedded Design & Development
SKU: 1470147 -
Boards Compatible with Arduino
Cytron Uno Board ATmega328 Microcontroller (Arduino Compatible)
SKU: 766269- A better version of Arduino Uno
- SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader
- USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable)
- Input voltage: DC7-15V
- 14 Digital I/O Pins (6 PWM outputs)
SKU: 766269 -
Boards Compatible with Arduino
STMICROELECTRONICS Development Board, STM32L476RG MCU, On-Board STLINK/V2-1, Arduino & ST Morpho Connectivity
Boards Compatible with ArduinoSTMICROELECTRONICS Development Board, STM32L476RG MCU, On-Board STLINK/V2-1, Arduino & ST Morpho Connectivity
SKU: 1470146- Model: STM32 Nucleo-64 boards
- Crystal oscillator: 32.768 kHz
- Board-specific features: 24 MHz or 48 MHz HSE
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration
SKU: 1470146 -
Boards Compatible with Arduino
Adafruit Metro Mini 328 – Arduino-Compatible – 5V 16MHz
SKU: 1178444- 5V logic with 3.3V compatible inputs can be converted to a 3.3V logic operation
- 32KB Flash Memory – 0.5K for bootloader
- Four indicator LEDs
- Easy reprogramming
- 31.5KB available after bootloading
- 16MHz Clock Speed
SKU: 1178444
