Here you get various servo accessories like servo joints, connects, servo tester, etc. If you are want to
Make a waling robot, pan tilt or robotic arm, Use these servo accessories to simplify your projects with servo motors. Versatile set of different accessories to create almost any kind of servo based robots or machine.for more info visit us.
Other Accessories
Showing all 24 results
-
Other Accessories
Ready to Sky Digital Servo Tester/ESC Consistency Tester
SKU: 1010953- Input voltage: 4.8-6.0v
- Screen Display 1.18inch
- Easy to Read 4 Digit 7 segment Screen
- Synchronous output servo system and performance for steering gear for precise control of servo control output signal
- Turn on the transmitter and set throttle stick to maximum (full up).
- Connect the LiPo battery.
- You will hear a musical tone then two beeps.
SKU: 1010953 -
-
Other Accessories
Cellmeter 8 Multi-Functional Digital Power Servo Tester
SKU: 57763- Balance Discharge Current: 90mA × 8 Cell([email protected] Voltage 4.2v)
- Servo Test Frequency: 50Hz, 60Hz, 100Hz, 125Hz, 200Hz, 250Hz, 300Hz,
- Battery Voltage Test Precision: 0.001V
- Support Battery Type:Â Can test Li-Po, Li-ion, Li-Fe (2-8S), NiCd, NiMH(4-8S) battery
- High visibility LCD display screen
- Port for balance plug for up to 8 cell Lipo, LiFe, or Li-Ion batteries
- Can be used as Servo tester to test standard and narrow servos.
- Port for discharge plug of NiMh/NiCd batteries
SKU: 57763 -
Other Accessories
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
SKU: 14950- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
SKU: 14950 -
Other Accessories
Full Set DIY 2DOF Robot Arm Manipulator Claw+2pcs Servo Brackets(Not Assembly) Kit
SKU: 31112- Weight capacity is about 300 gm objects
- Material: Full aluminum alloy
- Weight: About 64gm
- Maximum angle: 54mm
- Total length: 110mm (paw when closed overall longest length)
- Total width: 94mm (the claws open when the maximum overall width)
- Servo bracket used in the shoulders and knees or another joint of humanoid robots, biped robots etc.
SKU: 31112 -
Other Accessories
Gripper with Servo Motor
SKU: 11429- Supply Voltage: 7 – 17VDC
- Gripper Opening: 0-70mm
- Max Grip Force: [email protected] (higher if higher supply voltage)
- Max Grip Speed: 440mm/[email protected] (Controllable)
- Max Current:[email protected]
- Communication: Half Duplex Serial
SKU: 11429 -
Other Accessories
GT POWER 3-Channel Multi Servo Tester
SKU: 57812- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
- Full aluminum alloy housing
SKU: 57812 -
Other Accessories
Robot Manipulator Mechanical Arm Metal claws
SKU: 31102- The degree of Freedom (DOF): 2
- Paw material: aluminum alloy
- Paw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed paw)
- Claws overall width: 98mm (maximum overall width of the paw when open)
- Paw maximum opening angle: 55mm
SKU: 31102 -
Other Accessories
Robot Manipulator Mechanical Arm Metal Claws Normal Quality
SKU: 835823- The degree of Freedom (DOF): 2
- Claw material: aluminum alloy
- Claw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed claw)
- Claws overall width: 98mm (maximum overall width of the claw when open)
- Claw maximum opening angle: 55mm
SKU: 835823
