Raspberry Pi Hats
Showing 49–96 of 116 results
-
Raspberry Pi Hats
WIZnet W5100S-EVB-Pico
SKU: 1490026- RP2040 microcontroller with 2MByte Flash
- Dual-core cortex M0+ at up to 133MHz
- 264kByte multi-bank high-performance SRAM
- 30 multi-function General Purpose IO (4 can be used for ADC)
- 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
- 12-bit 500ksps Analogue to Digital Converter (ADC)
SKU: 1490026 -
-
-
-
-
-
Raspberry Pi Hats
Waveshare Isolated RS485 RS232 Expansion HAT for Raspberry Pi, SPI Control
SKU: 1231452- Serial port expansion chip: SC16IS752
- OPERATING VOLTAGE: 5V
- RS485 transceiver: SP3485
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboards
- Using SC16IS752 and SP3485, SP3232 multi-chip combination scheme, can realize SPI to RS485, RS232, the communication rate is up to 921600bps
- RS485 transceiver: SP3485
- RS232 transceiver: SP3232
- Communication Interface: SPI
- DATA RATE: Up to 921600bps
SKU: 1231452 -
-
Raspberry Pi Hats
Waveshare R800C GSM/GPRS HAT For Raspberry Pi
SKU: 1486413- Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
- UART interface, for connecting controller boards like Arduino/STM32
- Onboard voltage translator, 3.3V by default, switch to 5V via jumper
- 2x LED indicators, easy to monitor the working status
- SIM card slot, supports 1.8V/3V SIM card
SKU: 1486413 -
-
Raspberry Pi Hats
Waveshare Power over Ethernet HAT (E) for Raspberry Pi
SKU: 1486412- Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
- PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
- Fully isolated switched-mode power supply (SMPS)
- Smaller and more flexible with a more compact component layout
SKU: 1486412 -
Raspberry Pi Hats
Waveshare Extended 4-Ch PCIe Gen 2 ×1 Expander Stable Performance Driver-Free
SKU: 1219065- Extending 1-ch PCIe to 4-ch PCIe Gen 2 × 1 sockets, PCIe Gen 1 × 1 compatible
- Flexible power supply options: powered from either PCIe 12V, OR from 12V DC header
- Adopts ASM1184 controller, driver-free, plug and play
SKU: 1219065 -
-
Raspberry Pi Hats
Waveshare Mini Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4
Raspberry Pi HatsWaveshare Mini Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4
SKU: 1373105- Brand: Waveshare
- Networking: Dual Gigabit Ethernet RJ45 connector
- USB: USB 2.0 Port
- PIN Header: Raspberry Pi 40PIN GPIO header
- Storage:Â Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
SKU: 1373105 -
Raspberry Pi Hats
Waveshare Industrial IoT Wireless Expansion Module Designed for Raspberry Pi Compute Module 4 (Without Power Adapter)
Raspberry Pi HatsWaveshare Industrial IoT Wireless Expansion Module Designed for Raspberry Pi Compute Module 4 (Without Power Adapter)
SKU: 1144683- CM4 SOCKET: suitable for all variants of Compute Module 4
- NETWORKING: Gigabit Ethernet RJ45
- M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module
- Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication
- USB USB: 2.0 × 3
SKU: 1144683 -
-
-
-
Raspberry Pi Hats
Raspberry Pi GPIO UART HAT / Shield V1.0
SKU: 815864- Onboard Power Indicator Lamp
- Onboard Infrared Receiving Function
- GPIO Expansion Function:
- 16 independent GPIO with power and ground (3.3V level)
- 2 Independent SPI expansion interface and 1 I2C expansion interface
- 1 standard RS232 serial port: can directly connect with PC etc.
SKU: 815864 -
Raspberry Pi Hats
Waveshare UPS HAT (D) for Raspberry Pi, Supports 21700 Li battery (NOT included), 5V Uninterruptible Power Supply, Pogo Pins Connector
Raspberry Pi HatsWaveshare UPS HAT (D) for Raspberry Pi, Supports 21700 Li battery (NOT included), 5V Uninterruptible Power Supply, Pogo Pins Connector
SKU: 1782923- Output Voltage: 5V
- Control Bus: I2C
- Battery Support: 21700 Li battery × 2 (in parallel, NOT included)
- Charger Support: 5V (Type-C port)
SKU: 1782923 -
Raspberry Pi Hats
Argon ONE M.2 Expansion Board (NVME)
SKU: 1661068- Simply replace the bottom of the Argon ONE Case with the expansion board and the case can now use SSDs. It is recommended to use Raspberry Pi 4 Cases though due to the USB 3.0 ports the boards provide.
- Argon ONE M.2 is UASP Supported for the Raspberry Pi 4Â which means you can maximize the transfer speeds of your M.2Â NVME Drive.
- Adds M.2 NVME SSD Compatibility to your Raspberry Pi 4. Only works with Argon ONE Raspberry Pi 4 Case which is sold separately.
SKU: 1661068 -
-
-
-
Raspberry Pi Hats
Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI
Raspberry Pi HatsWaveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI
SKU: 1486387- Product Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long-range communication through SPI
- Operating Voltage 3.3V~5V
- CAN Controller MCP2515
- CAN Transceiver SIT65HVD230DR
- Communication BUS SPI
SKU: 1486387 -
Raspberry Pi Hats
Waveshare Mini Base Board (C) Designed for Raspberry Pi Compute Module 4
SKU: 1486406- Product Waveshare Mini Base Board (C) Designed for Raspberry Pi Compute Module 4
- Networking Gigabit Ethernet RJ45 connector
- Connector M.2 M KEY, supports communication modules or NVME Solid State Drives, Raspberry Pi 40PIN GPIO header
- USB 2.0 Type A × 2
- Display LCD port (40pin 0.5mm FPC connector)
SKU: 1486406 -
-
Raspberry Pi Hats
Waveshare Dual ETH Quad RS485 Base Board (B) for Raspberry Pi Compute Module 4
SKU: 1231451- Power Input: 7-36V
- CM4 Socket: suitable for all variants of Compute Module 4
- Networking: Gigabit Ethernet RJ45 connector, 100M Ethernet RJ45 connector
- USB: USB 2.0 Type A × 2
- Camera: MIPI CSI-2 port × 2 (15pin 1.0mm FPC connector)
- Video: HDMI port × 1, supports 4K 30fps output
SKU: 1231451 -
Raspberry Pi Hats
Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Raspberry Pi HatsWaveshare Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
SKU: 1231453- Power Input: 5V
- Connector: Raspberry Pi 40PIN GPIO interface × 1
- USB: USB 2.0 Type A interface × 1
- Camera: MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
- Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
SKU: 1231453 -
-
Raspberry Pi Hats
ELECROW Crowtail shield for Raspberry Pi Pico (RP2040)
SKU: 1855107- Model: ELECROW Crowtail shield for Raspberry Pi Pico (RP2040)
Crowtail GPIO Expansion Board for Pico: Separate the pins and power supply of the board, providing 10 additional Crowtail ports - Rich Peripherals for Crowtail: Provides 10 Crowtail ports, including 2 I2C, 2 UART, 3 digital, 3 analogs, 1 SPI port, 1 power switch, 1 BAT interface, and SWD debugging interface.
- No soldering required, plug and play: support direct connection to Crowtail sensors
- Platform support: MicroPython & Arduino
SKU: 1855107 - Model: ELECROW Crowtail shield for Raspberry Pi Pico (RP2040)
-
-
Raspberry Pi Hats
Waveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
Raspberry Pi HatsWaveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
SKU: 1300107- POWER INPUT: 7-36V
- STORAGE: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
- FAN: allows speed adjustment and measurement, 5V / 12V
- INDICATOR: M.2 status LED
- CM4: status LED
SKU: 1300107 -
Raspberry Pi Hats
PiKVM v3 HAT for Raspberry Pi 4 by HiPi
SKU: 1248185- Fully open-source software and fine-tuned and pre-configured Linux-based OS.
- Access to the server via Web UI or VNC.
- HDMI video capture with extra-low latency using MJPEG or H.264/WebRTC (1080p 50Hz max).
- Keyboard & mouse emulation
SKU: 1248185 -
Raspberry Pi Hats
Waveshare RM500U-CN 5G HAT for Raspberry Pi Quad Antennas LTE-A Multi Band 5G/4G/3G
Raspberry Pi HatsWaveshare RM500U-CN 5G HAT for Raspberry Pi Quad Antennas LTE-A Multi Band 5G/4G/3G
SKU: 1254992- 5G NR 3GPP Release 15 NSA/SA operation, Sub-6 GHz
- 5G NR NSA n41, n78, n79
- LTE Category downlink Cat 12, uplink Cat 13
- Operating temperature -30 °C ~ +75 °C
- Supporting RM500U-CN core module, supporting 5G and LTE-A multiple network standards, supporting 5G NSA and SA networking, supporting four major domestic operators
SKU: 1254992 -
Raspberry Pi Hats
Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
Raspberry Pi HatsWaveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
SKU: 1254987- Region / Provider EMEA / APAC (except Japan and CMCC) / Brazil
- Module dimensions 42.0 × 30.0 × 2.3 (mm)
- Operating temperature -30°C ~ +70°C
- LTE-FDD B1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32)
- LTE-TDD B38, B40, B41
- B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41
SKU: 1254987