A pressure sensor is a device for pressure measurement of gases or liquids. The pressure is an expression of the force required to stop a fluid from expanding and is usually stated in terms of force per unit area. A pressure sensor usually acts as a transducer, it generates a signal as a function of the pressure imposed. Here is a huge collection of Load / Force Sensor.
Load cells (Weighing cell) are available in the range from 1kg to 20kg. Pressure sensors are used for control and monitoring in thousands of everyday applications. Pressure sensors can also be used to indirectly measure other variables such as fluid/gas flow, speed, water level, and altitude.
Load / Pressure / Force / Flex Sensor
Showing 1–48 of 50 results
-
Load / Pressure / Force / Flex Sensor
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
SKU: 16925- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution:Â 24 bit.
SKU: 16925 -
-
Load / Pressure / Force / Flex Sensor
BF350 High Precision Resistance Strain Gauge / Pressure Sensor / Weighing Sensor 350 Ohm
Load / Pressure / Force / Flex SensorBF350 High Precision Resistance Strain Gauge / Pressure Sensor / Weighing Sensor 350 Ohm
SKU: 975711- Technical Indexes: BF series
- Strain limit: 2.0%
- Fatigue life: ≥1M
- Resistance: 350 ohms
- Contrast: 800: 1 (Min) (transmission)
- Sensitivity coefficient: 2.00-2.20
SKU: 975711 -
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 5kg YZC-131 With Wires
SKU: 28646- Model: YZC-131A
- Dimensions: 75 x 13 x 13 mm (L x W x H)
- Range: 5 kg
- Cable Length: 18 cm
- Fitting ScrewHole Size:Â M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
- Hysteresis: 0.0% F.S
- Repeatability: 0.05% F.S
SKU: 28646 -
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
Load / Pressure / Force / Flex SensorWeighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
SKU: 28623- Weighing Range: 0 ~ 1 kg.
- Rated Output: 1.0 ± 0.1mV / V.
- Non Linear Output: ± 0.03% F.S.
- Input Impedance: 1066 ± 10% Ω.
- Output Impedance: 1000 ± 10% Ω.
- Insulation Resistance: 2000 MΩ.
SKU: 28623 -
-
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Load / Pressure / Force / Flex SensorWeighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
SKU: 28643This straight bar load cell (sometimes called a strain gauge) can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.
SKU: 28643 -
Load / Pressure / Force / Flex Sensor
FlexiForce A301/1 Force Sensor
SKU: 125465The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.
Applications
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: 125465 -
Load / Pressure / Force / Flex Sensor
GY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module
Load / Pressure / Force / Flex SensorGY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module
SKU: 488983- The built-in 24bit AD converter.
- Immersion gold PCB, high quality, machine welding process to ensure quality.
- Power supply: 3 – 5V ( internal low dropout regulator ).
- Communication modes: Standard the IIC / SPI communication protocol.
SKU: 488983 -
Load / Pressure / Force / Flex Sensor
FlexiForce A101 Force Sensor
SKU: 125462The A101 is our smallest sensor can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: 125462 -
-
Load / Pressure / Force / Flex Sensor
FlexiForce A401 Force Sensor
SKU: 125464The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: 125464 -
Load / Pressure / Force / Flex Sensor
Pressure Sensor,5kg+ HX711AD Module,+4P DuPont Wire + Shell, Weighing Electronic Weighing Sensor Kit
Load / Pressure / Force / Flex SensorPressure Sensor,5kg+ HX711AD Module,+4P DuPont Wire + Shell, Weighing Electronic Weighing Sensor Kit
SKU: 1140251- Shell Dimensions: 100 mm
- Range: 5 kg
- Converter Module: HX711 A
- Cable Length: 18 cm
- Fitting ScrewHole Size:Â M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
SKU: 1140251 -
Load / Pressure / Force / Flex Sensor
FlexiForce A502 Ultra Thin Force Sensor
SKU: 125463- Thickness 0.203 mm (0.008 in.)
- Length 81.3 mm (3.20 in.)
- Width 55.9 mm (2.20 in.)
- Sensing Area 50.8 mm x 50.8 mm (2 in. x 2 in.)
- Sensing Range: 0 to 22.6 Kg
- Connector 2-pin Male Square Pin
- Substrate Polyester
- Pin Spacing 2.54 mm (0.1 in.)
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: 125463 -
-
-
-
-
-
Load / Pressure / Force / Flex Sensor
Te Connectivity Piezoelectric Sensor, Voltage, 1.38nf
SKU: 1373979- Piezoelectric film sensor without lead attachments
- Silver ink electrode
- Available in different sizes and thicknesses
- Great for making your own sensor
- Thin Piezo polymer w/ high piezo activity
- Flexible silver ink metallization
SKU: 1373979 -
Load / Pressure / Force / Flex Sensor
Adafruit MPRLS Ported Pressure Sensor Breakout – 0 to 25 PSI RoHS Compliant
Load / Pressure / Force / Flex SensorAdafruit MPRLS Ported Pressure Sensor Breakout – 0 to 25 PSI RoHS Compliant
SKU: 1256911- A silicone-gel covered pressure sensing gauge with a pre-calibrated and compensated 24 bit ADC
- Measure absolute pressure 0 to 25 PSI
- The port is made of stainless steel and is 3.7mm long and 2.5mm diameter
- 3.3V power regulation and level shifting
- Weight: 2g
SKU: 1256911 -
-
Load / Pressure / Force / Flex Sensor
Conductivity Sensor, 100 µS/cm to 200 mS/cm, 100 Hz to 10 kHz, 0.3 mA, 4 Electrode
Load / Pressure / Force / Flex SensorConductivity Sensor, 100 µS/cm to 200 mS/cm, 100 Hz to 10 kHz, 0.3 mA, 4 Electrode
SKU: 1224049- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
SKU: 1224049 -
Load / Pressure / Force / Flex Sensor
OHMITE Force Sensitive Resistor, FSR Series, 20 g to 5 kg, Square, Connector Housing
Load / Pressure / Force / Flex SensorOHMITE Force Sensitive Resistor, FSR Series, 20 g to 5 kg, Square, Connector Housing
SKU: 1224054- Force Measuring Range: 20 g to 5 kg
- 39.70 x 39.70mm active area
- Standard square format
- Connector housing (female, equivalent to Nicomatic 14106-12 and OF02)
SKU: 1224054 -
Load / Pressure / Force / Flex Sensor
Piezoresistive differential pressure sensor APR5852
SKU: 1443646- Product: Piezoresistive differential pressure sensor APR5852
- Measure Range: -0.15~0.15psi (-1.03~1.03 kPa) -1.5~1.5psi(-10.3~10.3 kPa)
- Full Output Of Negative Pressure (V): 0.5
- Standard Output With Zero Pressure (V): 2.5
SKU: 1443646 -