A temperature sensor is an electronic device that measures the temperature of its environment and converts the input data into electronic data to record monitor or signal temperature changes. There are many different types of temperature sensors. Here you can get a variety of Temperature & Humidity sensor which includes Digital Microcomputer Thermostat Switch, Humidity Controller Module, high-temperature resistance Probe, Moisture Sensor and many more modules.
There are Temperature Sensor applications in many industries including medical, motorsport, HVAC, agriculture, industrial, aerospace and automotive. In many applications where maintaining a specific temperature is vital there the temperature sensor is used, for example, if products must be kept at a certain temperature or for patient monitoring, the responsiveness and accuracy of the temperature sensor are critical.
Temperature & Humidity Sensor
Showing 1–48 of 269 results
-
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
SKU: 43950- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: 43950 -
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m)
SKU: 11500- A probe by new original installation import DS18B20 temperature sensor chip.
- Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof.
- Stainless steel tube encapsulation waterproof moistureproof prevent rust.
- Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability.
- Without the external components, the unique single bus;
SKU: 11500 -
Temperature & Humidity Sensor
DHT11 Digital Relative Humidity and Temperature Sensor Module
SKU: 28586- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Working voltage 3.3V-5V
- Humidity measurement range: 20%-95% (0-50 degrees range)
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement range: 0 degrees -50 degrees
- Temperature measurement accuracy: ±2.0degree.
SKU: 28586 -
Temperature & Humidity Sensor
PT100-S Waterproof 1m 30mm Stainless Steel Probe Temperature Sensor
SKU: 43973- Model number: FTARP05 series
- Mounting form Polish rod probe
- The Probe material: Stainless steel
- Probe diameter: 4mm
- Length of the probe: 30mm
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated)
- Accuracy ±(0.3°C+0.5%|t|)
- Thermal response time: <0.5s
SKU: 43973 -
Temperature & Humidity Sensor
DHT22 Digital Temperature and Humidity Sensor Module AM2302
SKU: 30772- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
SKU: 30772 -
Temperature & Humidity Sensor
DHT11 Temperature And Humidity Sensor Module with LED
SKU: 618487- Input Supply voltage (VDC): 3.3 ~ 5
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees
- Temperature measurement error: ±2 degrees
- Humidity measurement range: 20%~95%RH
- Humidity measurement error: ±5%RH
SKU: 618487 -
Temperature & Humidity Sensor
AHT10 High Precision Digital Temperature And Humidity Measurement Module
Temperature & Humidity SensorAHT10 High Precision Digital Temperature And Humidity Measurement Module
SKU: 890180- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
SKU: 890180 -
Temperature & Humidity Sensor
MAX6675 Thermocouple Sensor Module
SKU: 223518- High impedance differential inputs.
- Thermocouple break detection.
- 2000V of ESD signal.
- Embedded thermocouple break detection circuitry.
- Compatible with K-type temperature probe
- Simple SPI serial output temperature.
SKU: 223518 -
Temperature & Humidity Sensor
MAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature
Temperature & Humidity SensorMAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature
SKU: 43607- Internal integrated cold junction compensation circuit;
- With a simple three serial SPI interface;
- Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.
- High impedance differential inputs.
- Operating Voltage(VDC): 3 to 5.5
- Temperature Range(°C): 0 to +1024
- Cold Junction Compensation Range(°C): -20 to +80
SKU: 43607 -
Temperature & Humidity Sensor
DHT22/AM2302 Digital Temperature & Humidity Sensor
SKU: 181464- Ultra-Low Power.
- No Additional Components.
- Long Distance Signal Transmission.
- All Calibration, Digital Output & Completely Interchangeable.
- Relative Humidity & Temperature Measurement.
- Humidity Measurement Precision: ±2-5% RH.
- Temperature Measurement Precision: ±0.5 deg C.
SKU: 181464 -
Temperature & Humidity Sensor
DHT-11 Digital Temperature And Humidity Sensor
SKU: 16912- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
- Low power consumption.
- Relative humidity and temperature measurement
- All calibration, digital output
- Excellent long-term stability
SKU: 16912 -
Temperature & Humidity Sensor
Flame Sensor Module
SKU: 31320- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
SKU: 31320 -
Other Measuring Instrument, Temperature & Humidity Sensor
GM320 Non-Contact Infrared (IR) Handheld Temperature Meter
Other Measuring Instrument, Temperature & Humidity SensorGM320 Non-Contact Infrared (IR) Handheld Temperature Meter
SKU: 45667- Temperature range: -50 to 330°C
- Accuracy: ±1.5% or ±1.5°C
- Resolution: 0.1°C or 0.1°F
- Repeatability: 1% of reading or 1°C
- Supply Voltage: 3V DC (2 x AAA Battery)
SKU: 45667 -
Temperature & Humidity Sensor
PT1000-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor
Temperature & Humidity SensorPT1000-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor
SKU: 43887- Model number: FTARP05 series.
- Mounting form Polish rod probe
- The Probe material: Stainless steel.
- Probe diameter: 4mm.
- Length of the probe: 30mm.
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated).
- Accuracy ±(0.3°C+0.5%|t|).
- Thermal response time: <0.5 sec.
SKU: 43887 -
-
Temperature & Humidity Sensor
10k Ohm NTC Thermistor (Pack of 5)
SKU: 871999- Temperature Coefficient Type: NTC
- Thermal Time Constant: 10s
- Resistance 10kΩ
- Tolerance: ±1%
- Maximum Power Rating: 75mW
- Maximum Operating Temperature: +150°C
- Minimum Operating Temperature: -80°C
- Dimensions(dia.): 2 mm
- Length: 30mm
- Application: Compensation, Control, Measurement, etc.
SKU: 871999 -
-
-
Temperature & Humidity Sensor
Flame Sensor infrared Receiver Ignition source detection module
SKU: 12249- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: 12249 -
Temperature & Humidity Sensor
AHT20 Integrated temperature and humidity Sensor -40 ~ + 85 ℃
SKU: 1151994- Operating Voltage: 2.0-5.5VDC
- Measuring Range (humidity): 0% to 100% RH
- Temperature Range: -40°C to +85°C
- Output Interface: Grove I2C Interface
- Â Excellent long-term stability
- SMD package suitable for reflow soldering
SKU: 1151994 -
Temperature & Humidity Sensor
AHT21B Temperature and humidity sensor Temperature: -40~+80°C; Humidity: 0~100%RH
Temperature & Humidity SensorAHT21B Temperature and humidity sensor Temperature: -40~+80°C; Humidity: 0~100%RH
SKU: 1151996- Supply voltage: 2.2 – 5.5V
- Scope of Work Temperature: -40~+80°C; Humidity: 0~100%RH
- Fully calibrated and processed digital output, I²C protocol
- Wide voltage support 2.2 to 5.5V DC
- Excellent long-term stability
SKU: 1151996 -
-
Temperature & Humidity Sensor
MAX31865 PT100-PT1000 RTD Platinum Resistance Temperature Detector Module
Temperature & Humidity SensorMAX31865 PT100-PT1000 RTD Platinum Resistance Temperature Detector Module
SKU: 890201- Integration Lowers System Cost, Simplifies Design
- Efforts, and Reduces Design Cycle Time
- High Accuracy Facilitates Meeting Error Budgets
- 15-Bit ADC Resolution; Nominal Temperature
- Resolution 0.03125NC (Varies Due to RTD Nonlinearity)
- Total Accuracy Over All Operating Conditions:
SKU: 890201 -
Temperature & Humidity Sensor
BK05 250V 5A 80°C Plastic Thermostatic Temperature Switch NC
SKU: 52978- Rated Voltage: 250V
- Current: 5A
- Temperature: 80° C
- Cable Length: 73 mm
- Head Dimension: 20 x 8 x 4 (LxWxH) mm
- Mechanical making and breaking of electrical circuits.
- Easy to use, small and handy module.
- Acts as temperature operated circuit breaker.
SKU: 52978 -
-
Temperature & Humidity Sensor
K-type Thermocouple
SKU: 1320794- Product: K-type Thermocouple
- Tolerance: ± 1.5
- Operating temperature: up to 2000°C
- Thermocouple length: 110cm
- Operating Voltage(VDC): 3 to 5.5
- Internal integrated cold junction compensation circuit
- With a simple three-serial SPI interface
SKU: 1320794 -
Temperature & Humidity Sensor
LM35D Analog Temperature Sensor Module + Cable
SKU: 130267- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
SKU: 130267 -
Temperature & Humidity Sensor
AM2301 Capacitive Digital Temperature & Humidity Sensor
SKU: 347581- Model: AM2301.
- Supply voltage: 3.3 ~ 5.2 V DC.
- Signal output form: Digital signal output.
- Temperature measurement range: -40 ~ +80 ºC.
- Temperature measurement precision: ± 0.5ºC
- Humidity range: 10%~90%RH.
- Humidity measurement precision: ±3%RH.
SKU: 347581 -
Temperature & Humidity Sensor
3 Pin NTC Thermistor Temperature Sensor Module
SKU: 365937- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
SKU: 365937 -
Temperature & Humidity Sensor
DS18B20 Temperature Sensor Module For Arduino
SKU: 12237- Multidrop capability simplifies distributed temperature sensing applications
- Thermometer resolution is user-selectable from 9 to 12 bits
- Converts temperature to the 12-bit digital word in 750ms (max.)
- User-definable nonvolatile (NV) alarm settings
- Supply Voltage (V): 3 to 5.5
- Temperature Range(°C): -55 to +125
- Measuring Accuracy(°C): ±0.5
- Resolution: 9bits to 12bits (Selectable)
SKU: 12237 -
Temperature & Humidity Sensor
AMT1001 Resistive Humidity and Temperature Sensor Module
SKU: 347782- Supply voltage (Vin): DC5V ± 5%.
- Current Consumption: 2mA (MAX 5mA).
- Operating temperature range: 0 to 60 ° C.
- Humidity range: 95% RH (non condensing).
- Humidity measuring range: 20 to 95% RH.
SKU: 347782 -
Temperature & Humidity Sensor
DHT20 SIP Packaged Temperature and Humidity Sensor -40 ~ + 80 ℃
SKU: 1152001- Supply voltage: DC : 2.2 – 5.5V
- Measuring range (humidity) 0 ~ 100% RH
- Measuring range (temperature) -40 ~ + 80 ℃
- Output signal I2C signal
- Excellent long-term stability
- Fully calibrated
SKU: 1152001 -
-
-
Temperature & Humidity Sensor
AHT21 Integrated temperature and humidity sensor -40 ~ + 120 ℃
SKU: 1151995- Supply voltage: DC : 2.2 – 5.5V
- Measuring range (humidity): 0 ~ 100% RH
- Measuring range (temperature): -40 ~ + 120 ℃
- Humidity accuracy: ± 2 % RH ( 25 ℃ )
- Excellent long-term stability
- SMD package is suitable for reflow soldering
SKU: 1151995 -
-
Temperature & Humidity Sensor
100k Ohm NTC Thermistor (Pack of 5)
SKU: 871986- Temperature Coefficient Type: NTC
- Thermal Time Constant: 10s
- Resistance 100kΩ
- Tolerance: ±1%
- Maximum Power Rating: 75mW
- Maximum Operating Temperature: +150°C
- Minimum Operating Temperature: -80°C
- Dimensions(dia.): 2 mm
- Length: 30mm
- Application: Compensation, Control, Measurement, etc.
SKU: 871986 -
Temperature & Humidity Sensor
SeeedStudio Grove Temperature & Humidity Sensor (DHT11)
SKU: 598801- Operating voltage: 3.3 V / 5 V
- Measuring current: 1.3 – 2.1 mA
- Measuring humidity range: 5% – 95% RH
- Measuring temperature range: -20 to 60 ℃
- Full range temperature calibrated compensation
- High precision capacitive humidity sensor
- Long term stability
- Long transmission distance (>20m)
- Low power consumption
SKU: 598801 -