Categories

Current and Voltage Sensors

  • 20A Range Current Sensor Module ACS712

    SKU: 23911
     249.00

    (inc GST)

    ₹ 211.02 (+18% GST extra)

    1. Low-noise analog signal path
    2. Device bandwidth is set via the new FILTER pin
    3. 5 µs output rise time in response to step input current
    4. Small footprint, low-profile SOIC8 package
    5. 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
    6. Supply Voltage: 4.5V~5.5V DC
    7. Measure Current Range: 20A
    8. Sensitivity: 100mV/A
    Add to cart
  • 30A range Current Sensor Module ACS712

    SKU: 12264
     220.00

    (inc GST)

    ₹ 186.44 (+18% GST extra)

    1. Low-noise analog signal path
    2. Device bandwidth is set via the new FILTER pin
    3. 5 µs output rise time in response to step input current
    4. Small footprint, low-profile SOIC8 package
    5. 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
    6. Supply Voltage: 4.5V~5.5V DC
    7. Measure Current Range: 30A
    8. Sensitivity: 100mV/A
    Add to cart
  • 5A 12V Overcurrent Protection AC Current Detection Sensor Module

    SKU: 400224
     449.00

    (inc GST)

    ₹ 380.51 (+18% GST extra)

    LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current

    Add to cart
  • 5A range Current Sensor Module ACS712

    SKU: 23910
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1. Low-noise analog signal path.
    2. Device bandwidth is set via the new FILTER pin.
    3. 5 µs output rise time in response to step input current.
    4. Small footprint, low-profile SOIC8 package.
    5. 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
    Add to cart
  • 5A range of single-phase AC current sensor module

    SKU: 28369
     149.00

    (inc GST)

    ₹ 126.27 (+18% GST extra)

    1. Onboard precision microcurrent transformer.
    2. Onboard sampling resistor.
    3. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA.
    4. Rated input current: 5A
    5. Rated output current: 5mA
    6. Change: 1000: 1
    7. The linear range: 0 ~ 10A (100 ohms)
    8. Linearity: 0.2%
    Add to cart
  • Current and Voltage Detection Module Arduino Compatible

    SKU: 396910
     169.00

    (inc GST)

    ₹ 143.22 (+18% GST extra)

    Test Voltage range: DC3 – 25V (for Arduino work on 5V) or DC3 – 16.5V (for Arduino work on 3.3V)

    Test Current range: DC0 – 3A PCB

    Size (LxWxH)mm : 22  x 21 x 7

    Read more
  • SCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor

    SKU: 43399
     619.00

    (inc GST)

    ₹ 524.58 (+18% GST extra)

    1. Input Current : 100A
    2. Frequency: 50HZ-150KHZ
    3. Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
    4. Output Plug 3.5mm
    5. Dielectric Strength 6000V AC/1min
    6. Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
    7. Meet UL94-V0 flame retardant properties
    Add to cart
  • SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A

    SKU: 28668
     550.00

    (inc GST)

    ₹ 466.1 (+18% GST extra)

    1. Input Current : 30A
    2. Frequency: 50HZ-150KHZ
    3. Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
    4. Output Plug 3.5mm
    5. Dielectric Strength 6000V AC/1min
    6. Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
    7. Meet UL94-V0 flame retardant properties
    Add to cart
  • Voltage Detection Sensor Module 25V

    SKU: 29802
     99

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. You can also use the IICLCD1602 LCD to display voltage.
    2. By 3P connector, connect this module with the expansion of board Arduino
    3. Voltage input range: DC 0-25 V
    4. Voltage detection range: DC 0.02445 V  to 25 V
    5. Voltage analog resolution : 0.00489 V
    Add to cart