3D printer
-
12v 40W Ceramic Cartridge Heater
SKU: 12067₹ 149.00(inc GST)
₹ 126.27 (+18% GST extra)
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
-
2004 LCD Display RepRapDiscount Smart Controller with Adapter
SKU: 12060₹ 749.00(inc GST)
₹ 634.75 (+18% GST extra)
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
-
3D printer 128×64 Smart LCD controller for ramps 1.4
SKU: 12072₹ 829.00(inc GST)
₹ 702.54 (+18% GST extra)
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
-
3D Printer CNC Shield V4 Expansion Board For Arduino
SKU: 43461₹ 249.00(inc GST)
₹ 211.02 (+18% GST extra)
- Worked with Arduino nano.
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
- Released the I2C interface, you can connect to the LCD I2C or another I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
-
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
SKU: 16048₹ 588.00(inc GST)
₹ 498.31 (+18% GST extra)
- Supply Voltage: 12V
- Standard interfaces (as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A added to protect the component parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
-
3DEOMETRY INNOVATIONS NoisyBot 3D Printer
SKU: 47081₹ 55,000.00(inc GST)
₹ 46610.17 (+18% GST extra)
- Big Build Volume
- Portable
- Low Maintainance
- Build Volume: 180 mm diameter, 250 mm height.
- Layer Resolution: Up to 100 Microns.
- Filament Diameter: 1.75mm.
- Nozzle Diameter: 0.4mm.
- Power Supply: 220V-240V
- Nozzle Temperature: 260 °C.
- Heat Bed: 100 Degrees C.
-
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU: 12202₹ 190.00(inc GST)
₹ 161.02 (+18% GST extra)
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
-
Complete Kit of MK8 Extruder with 0.3mm Nozzle (Assembled)
SKU: 308450₹ 1,890.00(inc GST)
₹ 1601.69 (+18% GST extra)
- High-Quality Single End Cartridge Heater(Heating Element )
- High-quality stepper motor with larger torque and less heat buildup
- Uniform heating aluminium heater block
- Direct transmission, without the heavy gears, compact size and weight
- The lever mechanism makes filament insertion and extraction a breeze
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Black
SKU: 315610₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Blue
SKU: 316748₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Brown
SKU: 316800₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Gold
SKU: 316789₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Green
SKU: 316762₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Grey
SKU: 316778₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Orange
SKU: 316766₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Pink
SKU: 316770₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Purple
SKU: 316782₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Red
SKU: 316752₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Silver
SKU: 316774₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Skin Colour
SKU: 316794₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-White
SKU: 316744₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Yellow
SKU: 316758₹ 1,599.00(inc GST)
₹ 1355.08 (+18% GST extra)
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
-
LV8729 6V-36V Ultra Quiet 4-layer Substrate Stepper Motor Driver with Heatsink for 3D Printer
SKU: 130222₹ 499.00(inc GST)
₹ 422.88 (+18% GST extra)
1. In 64 subdivision or 128 subdivision to achieve a better ultra-quiet effect.
2. Operating voltage: 6V-36V, the proposed voltage is 12V.
3. The maximum current is 1.5A, the default is 0.8A.
4. Segment: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128. -
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
SKU: 18988₹ 690.00(inc GST)
₹ 584.75 (+18% GST extra)
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
-
MK8 Extruder Kit For Makerbot Prusa i3 3D Printer 1.75/0.4mm Printhead
SKU: 51496₹ 1,890.00(inc GST)
₹ 1601.69 (+18% GST extra)
- Extrusion nozzle: 0.4mm.
- Material Print: 1.75mm
- Nozzle Flow: About 24cc / hour
- Special ceramic heating insulation cotton guarantee stability; energy saving.
- Direct transmission, without heavy gear, compact size and weight
- There are a variety of specifications to choose the most suitable is the best
- 100K NTC thermistor, cooling fan
-
Nylon 12mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457716₹ 99.00(inc GST)
- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
-
Nylon 14mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457736₹ 99.00(inc GST)
- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
-
Nylon 16mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457743₹ 99.00(inc GST)
- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
-
Nylon 20mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457746₹ 99.00(inc GST)
- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
-
Nylon 25mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457748₹ 99.00(inc GST)
- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
-
Nylon 2mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 451058₹ 389.00(inc GST)
- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
-
Nylon 6mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 456976₹ 99.00(inc GST)
- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
-
Nylon 8mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457001₹ 99.00(inc GST)
- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
-
Sharp Edge Scraper 2 Inches for 3D Printers
SKU: 52264₹ 190.00(inc GST)
₹ 161.02 (+18% GST extra)
- Stainless steel blade is rustproof and strong.
- The rubber handle is comfortable and will offer a non-slip grip.
- The non-slip handle also features a ribbed thumb rest for ease of use during scraping.
- The rubber handle offers both comfort and a non-slip grip.
-
SK10 10MM linear bearing rail support XYZ Shaft Table CNC Router SH10A
SKU: 52486₹ 190.00(inc GST)
₹ 161.02 (+18% GST extra)
- Model description: SK10
- Shaft ID: 10mm
- Dimensions: 14 x 42 x 32 (LxWxH) mm
- Mounting Hole Diameter: Approx. 5.5 mm
- Center Hole Distance: Approx. 32 mm
- Material: Steel
- Net Weight: 25g
-
SK8 8MM linear bearing rail support XYZ Shaft Table CNC Router SH8A – 2Pcs
SKU: 52748₹ 149.00(inc GST)
₹ 126.27 (+18% GST extra)
- Model description: SK8
- Shaft ID: 8mm
- Dimensions: 14 x 42 x 32 (LxWxH) mm
- Mounting Hole Diameter: Approx. 5.5 mm
- Center Hole Distance: Approx. 32 mm
- Material: Steel
- Net Weight: 25g
-
Small 5V 0.3A Turbo Air Intake Fan (Size: 40x40x20mm)
SKU: 52674₹ 225.00(inc GST)
₹ 190.68 (+18% GST extra)
- Operating Voltage: 5V DC
- Operating Current: 300mA
- Normal Operating Temperature: 25°C-45°C.
- Weight: 26 gm.
- Life Expectancy: Dual Ball Bearing: 50000 hours.
- Sleeve Bearing: 20000-25000 hours.
- Reliable quality as well as Competitive price.
- Large volume flow and long life expectancy.
- High speed and large air flow.
- Low noise and high efficiency.
-
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor
SKU: 11993₹ 69.00(inc GST)
₹ 58.47 (+18% GST extra)
- Temperature range of use : – 30℃ ~ + 200℃.
- Dissipation power factor : ≥5 mW/℃ (static in the air).
- 100k Ohm NTC Thermistor.
- NTC Thin Film Thermistor Cable.
- Max power rating: 45 mW
- The hot time constant : ≤7 s(in the air)
-
Wanhao Duplicator i3 V2.1 3D Printer (Semi-Assembled)
SKU: 19053₹ 32,548.00(inc GST)
₹ 27583.05 (+18% GST extra)
- Model: WANHAO i3 V2.1
- Pre-assembled steel frame Prusa i3 you ever had.
- Fully open source enables you to use any most up to date software.
- Extra-long 45mm LM8UU bearings guide the extruder assembly for better lateral tracking.
- Compatible Software: Repetier (Opensource), CURA (Opensource), MatterControl (Opensource), Simplify 3D (Details)
- File Transfer: microSD Card & USB
- Frame Color: Steel Frame (Powder Coated Black)
- The Z-Axis endstop switch comes secured to a height-adjustable bracket allowing the freedom to choose between any of your favorite build
-
WANHAO White PLA 1.75 mm 1 KG Filament for 3D printer – Premium Quality
SKU: 18945₹ 1,299.00(inc GST)
₹ 1100.85 (+18% GST extra)
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
-
5th Gen Prusa i3 Desktop 3D Printer DIY Kit (Unassembled)
SKU: 3621₹ 23,089.00(inc GST)
₹ 19566.95 (+18% GST extra)
- AC Input Voltage: 100-120VAC/4.8A or 200-240VAC/2.4A
- Layer Resolution: ±0.10mm
- Printing Material: PLA, ABS, PVA, PEVA, HIPS
- 3D flatbed printer.
- Acrylic Plate, more stable and durable.
- Support ABS, PLA, PVA, WOOD, and NYLON easy to use.
- Support SD card with LCD for off-line printing (Included with the printer).
- Support Bowden extruder.
-
3D Printing Pen w/Filament and Power Adapter
SKU: 3605₹ 3,139.00(inc GST)
₹ 2660.17 (+18% GST extra)
- Input Voltage: 100-240 V AC.
- Temp: 160~230 Deg settable.
- Filament: 1.75 mm PLA or ABS.
- This 3D Pen is designed for the freehand drawing of 3-Dimensional objects
- Adjustable output speed, temperature
- Create projects horizontally or vertically
