Arduino Nano
-
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
SKU: 4657₹ 294.00(inc GST)
₹ 249.15 (+18% GST extra)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
SKU: 7146₹ 245.00(inc GST)
- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
SKU: 110787₹ 349.00(inc GST)
₹ 295.76 (+18% GST extra)
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
-
Original Arduino Nano
SKU: 648418₹ 1,840.00₹ 1,428.00(inc GST)
₹ 1210.17 (+18% GST extra)
You save(22.4%): ₹ 412.00
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
SKU: 42940₹ 240.00(inc GST)
- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
NANO IO Shield Expansion Board For Arduino Screw Terminals
SKU: 28522₹ 249.00(inc GST)
₹ 211.02 (+18% GST extra)
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size.
- Leads all pins out, convenient for wiring and doing experiments.
- Dimensions: 53 x 36 x 12 (LxWxH) mm.
- Weight: 22 gm.
-
Nano IO Expansion Shield for Arduino NANO 328P
SKU: 28525₹ 290.00(inc GST)
₹ 245.76 (+18% GST extra)
- All digital and analog pins breakout
- XBee and nRF24L01+ module interface
- External power supply current support
- Compatible pin map for electronic brick
- Output Voltage-3.3V
- 7-12V external power supply.
-
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
SKU: 16906₹ 215.00(inc GST)
₹ 182.2 (+18% GST extra)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
-
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
SKU: 30888₹ 210.00(inc GST)
₹ 177.97 (+18% GST extra)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
-
Arduino Nano 3.0 Beginners Kit
SKU: 835781₹ 2,199.00(inc GST)
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
-
3D Printer CNC Shield V4 Expansion Board For Arduino
SKU: 43461₹ 249.00(inc GST)
₹ 211.02 (+18% GST extra)
- Worked with Arduino nano.
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
- Released the I2C interface, you can connect to the LCD I2C or another I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
