Categories

Arduino UNO

  • 1602 LCD Board Keypad Shield Blue Backlight

    SKU: 12198
     225.00

    (inc GST)

    ₹ 190.68 (+18% GST extra)

    1. Provides a user-friendly interface that allows users to go through the menu, make selections etc.
    2. It consists of a 1602 white character blue backlight LCD.
    3. The keypad consists of 6 keys select, up, right, down, left and reset.
    4. To save the digital IO pins, the keypad interface only uses one ADC channel.
    5. The key value is read out through a 5 stage voltage divider.
    Add to cart
  • Advance kit for Arduino

    SKU: 31816
     2,750.00

    (inc GST)

    ₹ 2330.51 (+18% GST extra)

    1. All-in-one kit, a great starter kit for learning to code.
    2. Model Type: UNO Rev R3
    3. Microcontroller Chip: ATmega328
    4. Input Voltage(Recommended): 7-12V
    5. Operating Voltage: 5
    6. Analog I/O Pins: 6
    7. Digital I/O Pins: 14 (of which 6 provide PWM output)
    Add to cart
  • Arduino 37 in 1 Sensors Kit

    SKU: 31812
     1,199.00

    (inc GST)

    ₹ 1016.1 (+18% GST extra)

    1. For beginners who are interested in Arduino
    2. A complete set of Arduino’s most common and useful electronic components
    3. Infrared sensor receiving module
    4. Laser sensor module
    5. Temperature and humidity sensor module
    6. Infrared sensor module
    7. 5v relay module
    8. Obstacle avoidance sensor module.
    Add to cart
  • BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)

    SKU: 51659
     850.00

    (inc GST)

    ₹ 720.34 (+18% GST extra)

    1. ATmega328 chip on the module
    2. Compatible with for Arduino Uno
    3. Switch 5V or 3.3V GPIO
    4. Compatible with Processing code
    5. Expand SPI of Banana Pi
    6. Working voltage: 3.3V-4.5V
    7. GPIO voltage: 3.3V or 5.5
    8. 8 channel 10bit high-resolution ADC
    Read more
  • Cytron 2Amp Motor Driver Shield

    SKU: 16014
     829.00

    (inc GST)

    ₹ 702.54 (+18% GST extra)

    1. Logic control, 5V from Arduino main board
    2. Polarity protection for External motor power input
    3. 2 fast test buttons for each motor channel
    4. Motor Driven Voltage:6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source)
    5. Up to 2A current each channel
    6. Pin 4, 5,6,7 are used to drive two DC motor
    7. Support PWM speed control
    8. Support  advance speed control
    Add to cart
  • Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno

    SKU: 43298
     999.00

    (inc GST)

    ₹ 846.61 (+18% GST extra)

    1. Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
    2. Separate 3.3V voltage regulator for ESP8266-12 WROOM-02 module, 500mA max output.
    3. Each and every board is preassembled and tested before it is being shipped out to you.
    4. 802.11 b/g/n.
    5. Support Wi-Fi Direct (P2P), soft-AP.
    6. Integrated TCP/IP protocol stack.
    Add to cart
  • Cytron LCD keypad Shield High Quality

    SKU: 25582
     619.00

    (inc GST)

    ₹ 524.58 (+18% GST extra)

    1. Provides a user-friendly interface that allows users to go through the menu, make selections etc.
    2. It consists of a 1602 white character blue backlight LCD.
    3. The keypad consists of 6 keys select, up, right, down, left and reset.
    4. To save the digital IO pins, the keypad interface only uses one ADC channel.
    5. The key value is read out through a 5 stage voltage divider.
    Read more
  • Cytron XBee Shield

    SKU: 7981
     681.00

    (inc GST)

    ₹ 577.12 (+18% GST extra)

    1. Mounts directly onto your Arduino
    2. DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
    3. 3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
    4. Extra 0.1″ spaced prototyping holes
    5. Reset button brought out to shield
    6. Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
    Add to cart
  • Data Logger module Logging Shield data Recorder Shield

    SKU: 12191
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    1. SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
    2. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
    3. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
    4. The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
    5. A dedicated and well-designed data logging shield for Arduino.
    Add to cart
  • Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino

    SKU: 12205
     635.00

    (inc GST)

    ₹ 538.14 (+18% GST extra)

    1. Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
    2. Stackable Design, can directly be supported by for Arduino official Ethernet Library.
    3. Supports up to four simultaneous socket connections
    4. Can be used to store files for serving over the network.
    5. Can be accessed using the Mini SD TF library.
    6. IEEE802.3af compliant
    7. Low output ripple and noise (100mVpp)
    8. Overload and short-circuit protection
    Add to cart
  • JoyStick Shield Module Robotics Control

    SKU: 31190
     366.00

    (inc GST)

    ₹ 310.17 (+18% GST extra)

    1. 2-Axis joystick
    2. Bluetooth / Serial interface
    3. I2C interface
    4. nRF24L01 interface
    5. Nokia 5110 LCD interface
    6. Interface connector
    7. Power switch to switch between 3.3 and 5V
    Add to cart
  • L293D Motor Driver/Servo Shield for Arduino

    SKU: 9736
     179.00

    (inc GST)

    ₹ 151.69 (+18% GST extra)

    1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
    2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
    3. Can run motors on 4.5VDC to 25VDC.
    4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
    5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
    6. Pull down resistors keep motors disabled during power-up
    7. Big terminal block connectors to easily hook up wires (18-26AWG) and power
    8. 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
    Add to cart
  • Multifunction Shield For Arduino Uno / Leonardo

    SKU: 28516
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    1. 10K adjustable precision potentiometer.
    2. 3 x Independent push buttons.
    3. Piezo buzzer.
    4. DS18B20 temperature sensor interface.
    5. LM35 temperature sensor interface.
    6. Infrared receiver interface.
    Add to cart
  • Proto Screw Shield Assembled

    SKU: 31244
     359.00

    (inc GST)

    ₹ 304.24 (+18% GST extra)

    1. Arduino terminal to provide the IO, port connection.
    2. 3.81 posts quality, reliable, convenient, durable.
    3. Combined with the Proto Shield, the middle can be used as a prototype expansion board.
    4. Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
    5. The middle section can be placed small bread plate, convenient test extend
    Add to cart
  • Screw Shields V2 Terminal Expansion Board

    SKU: 31240
     313.00

    (inc GST)

    ₹ 265.25 (+18% GST extra)

    1. Dimensions : 66 x 19 x 16 (LxWxH) mm.
    2. Weight: 28 gm.
    3. I/O Screw terminals.
    4. Directly plug-able.
    5. Arduino Compatible.
    6. Compatible with Arduino UNO R3, Arduino UNO
    Add to cart
  • Sensor Shield V5 Expansion Board For Arduino

    SKU: 26598
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1. Retain the merits of the V4.0 version
    2. Laminated design
    3. PCB immersion gold processing technology
    4. IIC interface
    5. Bluetooth module communication interface
    6. SD card module communication interface
    7. APC220 wireless rf modules communication interface
    8. RB URF v1.1 ultrasonic sensors interface
    9. 12864 LCD string of line and parallel interface
    10. 32 servo controller interface
    Add to cart
  • Servo Driver Module Shield 16 Channel

    SKU: 31371
     550.00

    (inc GST)

    ₹ 466.1 (+18% GST extra)

    1. The I2C input, PWM output control 16 roads, steering gear can 16 roads.
    2. The steering gear power independent V + input maximum 6 V.
    3. Logic signals and logical power independent output for 3V to 5 V.
    4. 40-1000 Hz frequency.
    5. Terminal block for power input.
    6. Reverse polarity protection on the terminal block input
    7. Green power-good LED
    Add to cart
  • Uno Learning kit for Arduino

    SKU: 31821
     750.00

    (inc GST)

    ₹ 635.59 (+18% GST extra)

    1. All-in-one kit, a great starter kit for learning coding.
    2. Microcontroller ATmega328 (SMD) – Interface CH340G
    3. Operating Voltage: 5V
    4. Input Voltage (recommended): 7-12V
    5. Input Voltage (limits): 5-20V
    6. Digital I / O Pins 14 (of which 6 provide PWM output)
    7. Analog Input Pins: 6
    Add to cart
  • UNO Proto Shield prototype expansion board with SYB-170 mini breadboard

    SKU: 28256
     194.00

    (inc GST)

    ₹ 164.41 (+18% GST extra)

    1. It has a nice standard 0.1″x0.1″ prototyping grid with big pads
    2. Comes with Stacking headers and plain header, choose whichever you want when soldering together
    3. An IC pattern for adding DIP ICs up to 20 pins
    4. Power rails down the middle and sides
    5. A reset button and an extra general use button
    6. Two 3mm general use LEDs, red and green, as well as 2 matching resistors
    Read more
  • Uno R3 Beginners Kit for Arduino

    SKU: 31475
     1,990.00

    (inc GST)

    ₹ 1686.44 (+18% GST extra)

    1. Great for Starting with Arduino Programming
    2. Variety of components are included in this pack to try out different projects.
    3. The kit comes with quality components assured by Robu.in.
    4. All-in-one kit, a great starter kit for learning coding.
    5. Microcontroller ATmega328 (SMD) – Interface CH340G
    6. Operating Voltage: 5V
    7. Input Voltage (recommended): 7-12V
    8. Input Voltage (limits): 5-20V
    9. Digital I / O Pins 14 (of which 6 provide PWM output)
    10. Analog Input Pins: 6
    Add to cart
  • UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3

    SKU: 48065
     419.00

    (inc GST)

    1. A basic Arduino Kit including everything to get started.
    2. It includes a quality proven Arduino Cable.
    3. It includes a strong and sturdy Transparent Acrylic Case.
    4. Microcontroller ATmega328 (SMD) – Interface CH340G
    5. Operating Voltage: 5V
    6. Input Voltage (recommended): 7-12V
    7. Digital I / O Pins 14 (of which 6 provide PWM output)
    8. Analog Input Pins: 6
    Read more
  • Uno R3 CH340G ATmega328p Development Board Compatible with Arduino

    SKU: 44497
     269.00

    (inc GST)

    ₹ 227.97 (+18% GST extra)

    1. Microcontroller ATmega328 (SMD) – Interface CH340G
    2. Operating Voltage: 5V
    3. Input Voltage (recommended): 7-12V
    4. Input Voltage (limits): 5-20V
    5. Digital I / O Pins 14 (of which 6 provide PWM output)
    6. Analog Input Pins: 6
    Add to cart
  • Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3

    SKU: 48057
     525.00

    (inc GST)

    1. A basic Arduino Kit including everything to get started.
    2. It includes a quality proven Arduino Cable.
    3. It includes a strong and sturdy Transparent Acrylic Case.
    4. Micro-controller : ATmega328
    5. Operating Voltage: 5V
    6. Input Voltage (recommended) : 7-12V
    7. Digital I/O Pins: 14 (of which 6 provide PWM output)
    8. Analog Input Pins: 6
    Read more
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible for Arduino UNO

    SKU: 110750
     889.00

    (inc GST)

    ₹ 753.39 (+18% GST extra)

    1. USB-TTL converter.
    2. Logic Level: 5V.
    3. Operating Supply Voltage: 5V.
    4. Digital I/O Pins: 14.
    5. Analog I/O Pins: 6.
    Add to cart
  • XBee Shield V03 Module Wireless Control

    SKU: 12197
     350.00

    (inc GST)

    ₹ 296.61 (+18% GST extra)

    1. Stackable design, easy to plug into the ARDUINO development board.
    2. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
    3. 3.3v and 5v dual power output.
    4. 3.3v and 5v IO compatible.
    5. USB2.0 protocol.
    Add to cart
  • XD-216 Screw shield Screw Shield V1 Expansion Board

    SKU: 31175
     446.00

    (inc GST)

    ₹ 377.97 (+18% GST extra)

    1. Size: 29 x 71 mm
    2. Combines the function of Arduino Screw Shield and Sensor Shield.
    3. Expand all of IO interfaces from Arduino.
    4. 3-Pin male headers for easy sensor/servo connection.
    5. The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient.
    Add to cart
  • Yun Shield V2.4

    SKU: 127767
     3,399.00

    (inc GST)

    ₹ 2880.51 (+18% GST extra)

    1. Open source Linux (OpenWrt) inside
    2. Low power consumption
    3. Support Passive PoE Injector.
    4. Managed by Web GUI, SSH via LAN or WiFi
    5. Software upgradeable via network
    6. Built-in web server
    7. Support internet connection via LAN port, WiFi or 3G dongle.
    8. Support USB flash to provide storage for Arduino projects.
    9. Failsafe design provides a robust system.
    10. Compatible with Arduino Leonardo, Uno, Duemilanove, Diecimila, Mega, Due, Teensy,
    11. Compatible with Arduino IDE
    Add to cart
  • Uno R3 Board without Cable compatible with Arduino

    SKU: 14140
     399.00

    (inc GST)

    ₹ 338.14 (+18% GST extra)

    1. Micro-controller : ATmega328.
    2. Operating Voltage : 5V.
    3. Input Voltage (recommended) : 7-12V.
    4. Digital I/O Pins : 14 (of which 6 provide PWM output).
    5. Analog Input Pins : 6.
    Add to cart
  • Uno R3 with Cable compatible with Arduino

    SKU: 6337
     425.00

    (inc GST)

    1. Micro-controller : ATmega328.
    2. Operating Voltage : 5V.
    3. Input Voltage (recommended) : 7-12V.
    4. Digital I/O Pins : 14 (of which 6 provide PWM output).
    5. Analog Input Pins : 6.
    Read more
  • SHIELD-EKG-EMG

    SKU: 6320
     2,509.00

    (inc GST)

    ₹ 2240.18 (+12% GST extra)

    1. Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs
    2. Calibration signal generation by D4/D9 digital output
    3. Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
    4. Input connector for standard or active electrodes
    5. Works with both 3.3V and 5V Arduino boards
    Read more
  • ADK USB Host Shield compatible with Arduino

    SKU: 3366
     699.00

    (inc GST)

    ₹ 592.37 (+18% GST extra)

    1. Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
    2. Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
    3. Supports HID devices, such as keyboards, mice, joysticks, etc.
    4. Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
    Add to cart
  • Cytron Arduino PS2 Shield

    SKU: 2506
     1,349.00

    (inc GST)

    ₹ 1143.22 (+18% GST extra)

    1. 5V powered low current consumption.
    2. Simple to use UART protocol
    3. Vibrator motor on PS2 is controllable.
    4. Wired and Wireless PS2 controller is supported.
    5. PS2 Controller will automatically operate in analog mode.
    6. A status LED
    7. Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
    8. Jumper selectors to select different digital pin as UART TX and RX pin.
    Add to cart
  • FreeDuino w/ Data Cable for Arduino UNO R3

    SKU: 2431
     409.00

    (inc GST)

    1. The board is built on a high-quality FR-4(1.6 mm) double-sided PCB with a green solder mask and a clear and legible legend
    2. Great platform to learn embedded programming
    3. Compatible with all Arduino compatible shields and the Arduino IDE
    4. Power Input: 7- 10V (higher voltage will damage the board)
    5. Comes with an Atmega328 with a pre-burnt Arduino bootloader
    6. Has a standard 6×1 AVR ISP Header
    7. All I/O pins connected by a female header, perfect for prototyping
    Read more