Categories

Contactor

  • 1 channel 5V 10A Relay Control Board Module with Optocoupler

    SKU: 25289
     89.00

    (inc GST)

    ₹ 75.42 (+18% GST extra)

    1. Channel: 1 channel
    2. Relay Voltage: 5V
    3. High impedance controller pin
    4. Pull-down circuit for the avoidance of malfunction
    5. One normally closed contact and one normally open contact
    6. Triode drive, increasing relay coil
    Add to cart
  • 1 Channel 5V 10A Relay Module For Arduino PIC AVR DSP ARM

    SKU: 9716
     79

    (inc GST)

    ₹ 66.95 (+18% GST extra)

    1. Max Current : 20mA
    2. Relay Contact Current Capacity at AC250V: 10A
    3. Relay Contact Current Capacity at DC30: 10A
    4. One normally closed contact and one normally open contact
    5. One normally closed contact and one normally open contact
    6. Triode drive, increasing relay coil
    7. High impedance controller pin
    8. Pull-down circuit for the avoidance of malfunction
    9. Power supply indicator lamp
    Add to cart
  • 1 Road/Channel Relay Module (with light coupling) 12V

    SKU: 31186
     114.00

    (inc GST)

    ₹ 96.61 (+18% GST extra)

    1. Operating Voltage: 12V DC
    2. Equipped with high-current relay 10A@250VAC / 10A@30VDC
    3. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
    4. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
    5. Freewheeling diode to protect your microcontroller
    6. Input Signal Pin connected to Burg stick for easy accessibility
    7. LED Status indicators to indicate the relay ON/OFF status
    8. Mounting holes provided
    Add to cart
  • 1 Road/Channel Relay Module (with light coupling) 24V

    SKU: 31206
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Operating Voltage: 24V DC
    2. Equipped with high-current relay 10A@250VAC / 10A@30VDC
    3. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
    4. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
    5. Freewheeling diode to protect your microcontroller
    6. Input Signal Pin connected to Burg stick for easy accessibility
    7. LED Status indicators to indicate the relay ON/OFF status
    8. Mounting holes provided
    Add to cart
  • 12V 16 Channel Relay Module with Light Coupling LM2576 Power Supply

    SKU: 28443
     790.00

    (inc GST)

    ₹ 669.49 (+18% GST extra)

    1. 12V relay with AC contact capacity of 10A 250V and optocoupler protection.
    2. Onboard power supply module does not need an external power supply. I / O port driver is active low.
    3. The module can be used as microcontroller development board module and also as appliance control, PLC extended output.
    4. It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
    5. The 1-16 road can be any full on/off or any road.
    6. All interfaces can be directly connected through the terminal leads, very convenient.
    Add to cart
  • 12V Dual Channel Relay Module (with Light Coupling)

    SKU: 31210
     156.00

    (inc GST)

    ₹ 132.2 (+18% GST extra)

    1. Operating Voltage: 12V DC
    2. Two separate LEDs for On/Off indication of the Relay
    3. Triggering input voltage 3.3V – 5V 4)
    4. Back EMF protection
    5. Equipped with high-current relay 10A@250VAC / 10A@30VDC
    6. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
    7. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
    8. Freewheeling diode to protect your microcontroller
    9. Input Signal Pin connected to Burg stick for easy accessibility
    10. Mounting holes provided
    Add to cart
  • 24V 4-Channel Relay Module (with Light Coupling)

    SKU: 31227
     341.00

    (inc GST)

    ₹ 288.98 (+18% GST extra)

    1. Operating Voltage: 24V DC
    2. Two separate LEDs for On/Off indication of the Relay
    3. Triggering input voltage 3.3V – 5V 4)
    4. Back EMF protection
    5. Equipped with high-current relay 10A@250VAC / 10A@30VDC
    6. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
    7. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
    8. Freewheeling diode to protect your microcontroller
    9. Input Signal Pin connected to Burg stick for easy accessibility
    10. Mounting holes provided
    Add to cart
  • 24V Dual Channel Relay Module (with Light Coupling)

    SKU: 31217
     156.00

    (inc GST)

    ₹ 132.2 (+18% GST extra)

    1. Operating Voltage: 24V DC
    2. Two separate LEDs for On/Off indication of the Relay
    3. Triggering input voltage 3.3V – 5V 4)
    4. Back EMF protection
    5. Equipped with high-current relay 10A@250VAC / 10A@30VDC
    6. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
    7. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
    8. Freewheeling diode to protect your microcontroller
    9. Input Signal Pin connected to Burg stick for easy accessibility
    10. Mounting holes provided
    Add to cart
  • 4 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM

    SKU: 9729
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1. Channel: 4 channel
    2. Relay Operating Voltage: 5V
    3. Triode drive, increasing relay coil
    4. High impedance controller pin
    5. Pull-down circuit for the avoidance of malfunction
    6. Power supply indicator and Control indicator lamp
    7. Power supply and relay instructions, lit, the disconnect is off;
    8. The input signal, signal, common Terminal and start conducting;
    Add to cart
  • 4 Road/Channel Relay Module (with light coupling) 12V

    SKU: 31219
     230.00

    (inc GST)

    ₹ 194.92 (+18% GST extra)

    1. Operating Voltage: 12V DC
    2. Equipped with high-current relay 10A@250VAC / 10A@30VDC
    3. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
    4. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
    5. Freewheeling diode to protect your microcontroller
    6. Input Signal Pin connected to Burg stick for easy accessibility
    7. LED Status indicators to indicate the relay ON/OFF status
    8. Mounting holes provided
    Add to cart
  • 5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse

    SKU: 28487
     236.00

    (inc GST)

    ₹ 200 (+18% GST extra)

    1. Has been assembled, and electrical test passed.
    2. Operating Voltage: 5V
    3. Operating Current: 12.5mA
    4. Maximum Load: 2A @ 240VAC
    5. Input control signal voltage:
      1. 0-2.5V status low level, relay OFF
      2. 3-5V status high level, relay ON
    Add to cart
  • 5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse

    SKU: 28500
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    1. 2 channel 2 AMP Solid State Relay board
    2. Control 2 loads of up to 2 amps each at 120V or 240V AC.
    3. Good for lighting, holiday displays etc.
    4. Input control signal voltage:
      1. 0-0.5V the state of low-level relay OFF
      2. 0.5-3.3V Unknown State
      3. 3.3-5V high-level relay ON
    5. Operating Voltage: 5V
    6. Operating Current: 16mA
    7. Maximum Load: 2A @ 240VAC
    Add to cart
  • 5V 2 channel USB PC Intelligent Control Relay Module

    SKU: 31305
     498.00

    (inc GST)

    ₹ 422.03 (+18% GST extra)

    1. Contact type: NC / COM / NO
    2. Input current: ≥300mA
    3. Input voltage: DC 5V
    4. Support Win7, XP 32-bit systems
    5. Onboard square USB interface, stable connection.
    6. Use imported high-performance USB control chip.
    7. Application code: Green indicates that the  relay is closed, the red disconnect
    8. Military grade PCB board production.
    Add to cart
  • 5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module

    SKU: 28508
     990.00

    (inc GST)

    ₹ 838.98 (+18% GST extra)

    1. 8 channel 2 AMP Solid State Relay board
    2. Control 8 loads of up to 2 amps each at 120V or 240V AC.
    3. Good for lighting, holiday displays etc.
    4. Has been assembled, and the electrical test passed.
    5. Input control signal voltage:
      1. 0-2.5V status low level, relay OFF
      2. 2.5-20V status high level, relay ON
    6. Operating Voltage: 5V
    7. Operating Current: 16mA
    8. Maximum Load: 2A @ 240VAC
    Add to cart
  • 5V 4 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse – Good Quality

    SKU: 28504
     690.00

    (inc GST)

    ₹ 584.75 (+18% GST extra)

    1. Has been assembled, and electrical test passed.
    2. Led indicator for each relay.
    3. Operating Voltage: 5V
    4. Operating Current: 12.5mA
    5. Maximum Load: 2A @ 240VAC
    Add to cart
  • 5V 4 Channel SSR Solid State Relay Module 240V 2A Output with Resistive Fuse

    SKU: 44448
     590.00

    (inc GST)

    ₹ 500 (+18% GST extra)

    1. Has been assembled, and electrical test passed.
    2. Led indicator for each relay.
    3. Operating Voltage: 5V
    4. Operating Current: 12.5mA
    5. Maximum Load: 2A @ 240VAC
    Add to cart
  • 5V Dual Channel Relay Module

    SKU: 31557
     130.00

    (inc GST)

    ₹ 110.17 (+18% GST extra)

    1.  Two separate LEDs for On/Off indication of the Relay.
    2. Triggering input voltage 3.3V – 5V
    3. Two separate LEDs for On/Off indication of the Relay
    4. Triggering input voltage 3.3V – 5V 4)
    5. Back EMF protection
    6. Back EMF protection 2 LEDs to indicate when relays are ON.
    7. Works with logic level signals from 3.3V or 5V devices
    8. Opto isolation circuitry
    9. Module with diode current protection, short response time
    10. AC Control Voltage: 250V @max.10A
    11. DC Control Voltage: 30V @max. 10A
    Add to cart
  • 8 Channel 12V Relay Module USB (PC Intelligent) Control Switch

    SKU: 28545
     1,190.00

    (inc GST)

    ₹ 1008.47 (+18% GST extra)

    1. Square onboard USB interface for connection stability
    2. The use of imported high-performance USB controller chip
    3. Use the special relay driver chip ULN2803, relay work more stable
    4. Military grade PCB board production
    5. Input voltage: DC 12 V
    6. Input Current: more than 300mA
    7. Connection : NC / COM / NO
    Add to cart
  • 8 Channel 5V Solid State Relay Module Board OMRON for Arduino

    SKU: 43107
     990.00

    (inc GST)

    ₹ 838.98 (+18% GST extra)

    1. 8-channel 2 AMP Solid State Relay board.
    2. Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
    3. Good for lighting, Holiday displays etc.
    4. With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
    5. Power supply: 5 V DC(160 mA)
    6. Trigger Current: 2mA
    7. Trigger Voltage: 3.3V-5V
    Add to cart
  • 8 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM

    SKU: 9728
     399.00

    (inc GST)

    ₹ 338.14 (+18% GST extra)

    1. Channel: 8 channel
    2. Relay Operating Voltage: 5V
    3. One normally closed contact and one normally open contact
    4. Triode drive, increasing relay coil
    5. High impedance controller pin
    6. Pull-down circuit for the avoidance of malfunction
    7. Power supply indicator and Control indicator lamp
    8. Power supply and relay instructions, lit, the disconnect is off;
    Add to cart
  • 8 Road/Channel Relay Module (with light coupling) 12V

    SKU: 31228
     576.00

    (inc GST)

    ₹ 488.14 (+18% GST extra)

    1. Operating Voltage: 12V DC
    2. Equipped with high-current relay 10A@250VAC / 10A@30VDC
    3. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
    4. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
    5. Freewheeling diode to protect your microcontroller
    6. Input Signal Pin connected to Burg stick for easy accessibility
    7. LED Status indicators to indicate the relay ON/OFF status
    8. Mounting holes provided
    Add to cart
  • 8 Road/Channel Relay Module (with light coupling) 24V

    SKU: 31236
     576.00

    (inc GST)

    ₹ 488.14 (+18% GST extra)

    1. Operating Voltage: 24V DC
    2. Equipped with high-current relay 10A@250VAC / 10A@30VDC
    3. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
    4. High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
    5. Freewheeling diode to protect your microcontroller
    6. Input Signal Pin connected to Burg stick for easy accessibility
    7. LED Status indicators to indicate the relay ON/OFF status
    8. Mounting holes provided
    Add to cart
  • DC 12V Switch Delay-Relay Module with Adjustable Delay Time 0~25 Second Signal Triggering Switch Module

    SKU: 118315
     149.00

    (inc GST)

    ₹ 126.27 (+18% GST extra)

    1. Module based on: NE555 chip.
    2. Precision Pulse Generation / Timing.
    3. Adjustable Duty Cycle.
    4. Monostable Operation.
    5. Standby no power consumption
    6. Countless Application and Information Sources.
    7. Time can be adjusted by a potentiometer, the default is 0-25 seconds.
    8. Module supplies a diode with an anti-power reverse connection.
    Add to cart
  • ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m

    SKU: 43225
     690.00

    (inc GST)

    ₹ 584.75 (+18% GST extra)

    1. Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
    2. Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
    3. Transmission Distance : 400m (max)
    4. Relay : 5V,10A/250V AC 10A/30V DC
    5. Baud Rate: 9600.
    6. Diode effusion protection;
    7. Short response time
    Add to cart
  • NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V

    SKU: 43972
     120.00

    (inc GST)

    ₹ 101.69 (+18% GST extra)

    1. Module based on the NE555 chip.
    2. Input voltage: DC 12V
    3. Adjustable time: 0-10 s
    4. AC Control voltage: 250V/max. 10A
    5. DC Control Voltage: 30V/max. 10A
    6. Max. load: 2200W
    Add to cart
  • NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr

    SKU: 43889
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1. Timing from microseconds to long hours.
    2. Simple circuit design.
    3. Precision Pulse Generation / Timing.
    4. Adjustable Duty Cycle.
    5. Monostable Operation.
    6. Supply Voltage (V): 12
    7. Adjustable Time(s): 0 to 10
    8. AC Control Voltage(V): 0-250 @max. 10A
    9. DC Control Voltage(V): 0-30 @max. 10A
    Add to cart
  • SmartElex Battle Relay

    SKU: 55640
     590.00

    (inc GST)

    ₹ 500 (+18% GST extra)

    1. Max current and voltage:
      • 10A @ 125VAC
      • 7A @ 240VAC
    2. Relay resistance: 100 mΩ max
    3. 4.8V to 5.2V operating voltage
    4. 30mA typical draw from receiver
    5. Powerful auxiliary weapons control in RC combat.
    6. Glow plugs control in RC nitro vehicles.
    Add to cart
  • SmartElex Dual Channel Battle Relay

    SKU: 74971
     990.00

    (inc GST)

    ₹ 838.98 (+18% GST extra)

    1. Max current and voltage:
      • 10A @ 120VAC
      • 7A @ 250VAC
      • 10A @ 24VDC
    2. Relay resistance: 100 mΩ max
    3. Module operating voltage: 4.8V to 5.2V
    4. 30mA typical draw from receiver
    5. Powerful auxiliary weapons control in RC combat.
    6. Glow plugs control in RC nitro vehicles.
    Add to cart
  • Songle Single-channel 5V 30A Relay Module Power Failure Relay

    SKU: 62465
     249.00

    (inc GST)

    ₹ 211.02 (+18% GST extra)

    1. Voltage version: 5V
    2. The static current: 5mA
    3. Working current: 190mA
    4. Trigger current: 2-4mA
    5. Optical coupling isolation, driving ability is strong, stable performance; Trigger current is 5mA
    6. The module can be set high level or low-level trigger by the jumper
    7. Rated current of the interface is 16A
    Add to cart
  • USB Control 1 Channel Module 5V Relay Module

    SKU: 31300
     390.00

    (inc GST)

    ₹ 330.51 (+18% GST extra)

    1. Contact type: NC / COM / NO
    2. Input current: ≥300mA
    3. Input voltage: DC 5V
    4. Support Win7, XP 32-bit systems
    5. Onboard square USB interface, stable connection.
    6. Use imported high-performance USB control chip.
    7. Application code: Green indicates that the  relay is closed, the red disconnect
    8. Military grade PCB board production.
    Add to cart
  • BattleSwitch radio controlled 10A relay (Dimension Engineering)

    SKU: 6314
     1,984.00

    (inc GST)

    ₹ 1681.36 (+18% GST extra)

    1. 30mA typical draw from receiver
    2. 12-inch servo pigtail
    3. Max relay voltage: 240VAC
    4. Max relay current: 10A @ 28VDC, 12A @ 120VAC, 10A @ 240VAC.
    5. Relay resistance: 100 mΩ max
    6. operating voltage: 3.5V to 5.5V (on servo pigtail)
    Read more
  • Battle Switch (RCSwitch10)

    SKU: 4706
     1,018.00

    (inc GST)

    ₹ 862.71 (+18% GST extra)

    1. This is a Single Pole Double Throw(SPDT) type of relay
    2. Purposefully designed for RC Applications
    3. Max. AC voltage: 250V
    4. Max. DC voltage: 30VDC
    5. Max current: 10A
    Add to cart