Categories

Debugger

  • CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi

    SKU: 24628
     99

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Built-in USB to TTL Transfer chip.
    2. Designed to be used for USB to TTL electronic projects.
    3. TTL interface output, easy to connect to your MCU.
    4. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
    5. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
    6. Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
    Add to cart
  • DB9 Female Screw Terminal to RS232 RS485 Conversion Board

    SKU: 44051
     120.00

    (inc GST)

    ₹ 101.69 (+18% GST extra)

    1. Brings all 9 pins of a DB9 connector to screw terminal blocks
    2. Adapter used for communication debug
    3. 9 pcs signal line was all lead out, name and number clearly labeled;
    4. All-copper DR9 seat, anti-oxidation, better contact;
    5. Military board, three anti-paint sprays an entire board, corrosion-resistant;
    6. Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
    7. Use of environmentally friendly copper terminals, through IS0-9001.
    Add to cart
  • DB9 Male Screw Terminal to RS232 RS485 Conversion Board

    SKU: 44052
     120.00

    (inc GST)

    ₹ 101.69 (+18% GST extra)

    1. Brings all 9 pins of a DB9 connector to screw terminal blocks
    2. Adapter used for communication debug
    3. 9 pcs signal line was all lead out, name and number clearly labeled;
    4. All-copper DR9 seat, anti-oxidation, better contact;
    5. Military board, three anti-paint sprays an entire board, corrosion-resistant;
    6. Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
    7. Use of environmentally friendly copper terminals, through IS0-9001.
    Add to cart
  • PICkit3 PIC KIT3 Debugger Programmer Emulator Controller Development Board

    SKU: 28352
     1190

    (inc GST)

    ₹ 1008.47 (+18% GST extra)

    1. Full-speed USB support using Windows standard drivers
    2. Real-time execution
    3. Processors run at maximum speeds
    4. Built-in over-voltage/short circuit monitor
    5. Low voltage to 5V (1.8 to the 5V range)
    6. Read/write program and data memory of the microcontroller
    7. Program up to 512K byte flash.
    Add to cart
  • PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin

    SKU: 44534
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Adopt imported controller PL2303HX, which can stabilize the flash with high speed
    2. 500mA self-recovery fuse for protection
    3. Two data transmission indicator can monitor data transfer status in real time
    4. Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
    5. The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
    6. so that the board won’t be burnt down by material shortcut.
    7. Electrostatic package ensures the board will not be damaged before use
    Add to cart
  • PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial

    SKU: 28424
     156.00

    (inc GST)

    ₹ 132.2 (+18% GST extra)

    1. Built-in TTL COM PC-PL2303HX Chip.
    2. Standard USB type and TTL 4 pin connector
    3. Simple and Easy way to give USB support to your designs
    4. Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
    5. Cable Length: 1M
    6. Net Weight: 30gm
    Add to cart
  • PL2303HXD 6Pin USB TTL RS232 Convert Serial Cable

    SKU: 43645
     325.00

    (inc GST)

    ₹ 275.42 (+18% GST extra)

    1. Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
    2. Compatible with the RS422/RS485 interface
    3. Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection.
    4. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
    5. The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s FT232RQ USB to Serial
    6. Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V
    7. It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
    Add to cart
  • USB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS

    SKU: 43951
     175.00

    (inc GST)

    ₹ 148.31 (+18% GST extra)

    1. Fully compliant USB 2.0 standard, backward compatible with USB1.1
    2. Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
    3. Baud Rate Range: 75bps – 115200bps, up to 6Mbps
    4. Supports Plug, Play and hot-swap ( USB side)
    5. Better than using CH341D chip or similar chip to support the laptop USB port.
    6. Communication distance up to 1.2KM
    Add to cart
  • USB to RS485 TTL Serial Converter Adapter FT232

    SKU: 28453
     349.00

    (inc GST)

    ₹ 295.76 (+18% GST extra)

    1. Baud rate: 300 – 9216000bps, automatically detecting the serial signal data rate
    2. Load capacity: support multipoint, each converter allows RS485 interface device to connect 32
    3. Interface Protection: TVS tube protection, USB self-recovery protection
    4. Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac
    5. It can be up to 32 devices on the bus.
    Add to cart
  • USB To Serial Adapter Module USB TO TTL RS232 Arduino Cable With CTS RTS

    SKU: 43433
     450.00

    (inc GST)

    ₹ 381.36 (+18% GST extra)

    1. The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s.
    2. UART interface IC device which handles all the USB signaling and protocols. The cables provide a fast, simple way to connect.
    3. Devices with a TTL level serial interface to USB.
    4. Each TTL-232R cable contains a small internal electronic circuit board, utilizing the FT232R, which is encapsulated into the USB.
    5. the connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications.
    6. The USB side of the cable is USB powered and USB 2.0 full speed compatible.
    7. Each cable is 1.0m long and supports a data transfer rate up to 3 M baud.
    Add to cart
  • USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino

    SKU: 9707
     220.00

    (inc GST)

    ₹ 186.44 (+18% GST extra)

    1. Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
    2. Original FTDI FT232 chip, stable performance
    3. USB power has current protection, using 500MA self-restore fuse
    4. RXD/TXD transceiver communication indicator
    5. With power, sending, receiving indicator, working status LED indicators
    6. Mini USB Port Connection
    7. Support 3.3V, 5V
    Add to cart