Categories

Development Board

  • Advance kit for Arduino

    SKU: 31816
     2,750.00

    (inc GST)

    ₹ 2330.51 (+18% GST extra)

    1. All-in-one kit, a great starter kit for learning to code.
    2. Model Type: UNO Rev R3
    3. Microcontroller Chip: ATmega328
    4. Input Voltage(Recommended): 7-12V
    5. Operating Voltage: 5
    6. Analog I/O Pins: 6
    7. Digital I/O Pins: 14 (of which 6 provide PWM output)
    Read more
  • Aryabhatta 8051 Development Board AT89S52 with Onboard USB Programmer

    SKU: 28279
     489.00

    (inc GST)

    ₹ 414.41 (+18% GST extra)

    1. Quartz crystal 11.0592 MHz
    2. On board programmer.
    3. Reset button.
    4. Power plug-in jack.
    5. External pull-up resistors for Port 0.
    6. Port extensions for all ports.1.
    7. Good start for beginners.
    8. Easy to use.
    Add to cart
  • ATMEGA16 ATmega 32 ISP AVR Minimum Development System Board Module

    SKU: 43675
     249.00

    (inc GST)

    ₹ 211.02 (+18% GST extra)

    1. 32 I/O pin all the leads.
    2. Classic ATmega16 minimum system, eliminating the hassle of soldering.
    3. Support chips: ATmega16/ATmega32 and chip which pin-compatible.
    4. Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
    5. DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
    6. Reset: Power-on-reset and reset button.
    7. Power LED (D1) and the program run indicator (D2).
    8. Standard ISP download interface.
    Add to cart
  • ATTINY85 USB Development Board

    SKU: 31126
     149.00

    (inc GST)

    ₹ 126.27 (+18% GST extra)

    1. Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
    2. Power via USB or External Source or 7-16 v to 5 v (automatic selection).
    3. The Onboard, 150 ma 5 v Regulator.
    4. Built-in USB and serial were debugging).
    5. 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
    6. 8 k Flash Memory (about 6 k after bootloader).
    7. The I2C and SPI (vis USI).
    8. The Power LED and the Test/Status LEDs.
    Add to cart
  • BeagleBone Black REV C

    SKU: 55793
     5,299.00

    (inc GST)

    ₹ 4490.68 (+18% GST extra)

    1. Sitara AM3358BZCZ100 ARM Cortex-A8 32-Bit RISC microprocessor, up to 1GHz
    2. Onboard HDMI to connect directly to TVs and monitors
    3. More and faster memory now with 512MB DDR3L 400MHz SDRAM, 4GB eMMC Memory
    4. Onboard storage frees up the microSD card slot for greater expansion
    5. Support for existing Cape plug-in boards
    6. TPS65217C PMIC regulator and one additional LDO
    7. Debug support: Optional onboard 20-pin CTI JTAG
    8. HS USB 2.0 Client and Host ports
    Add to cart
  • Core Board STM8S103F3P6 STM8 Development Board Minimum System Board

    SKU: 31263
     135.00

    (inc GST)

    ₹ 114.41 (+18% GST extra)

    1. Chipboard STM32F103C8T6
    2. On board, SWIM interface and reset button
    3. Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
    4. Power light and the Demo indicator light
    5. Leads all the pins and has detailed label for the Pins.
    6. Support SWIM debug mode.
    Add to cart
  • Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module

    SKU: 56432
     690.00

    (inc GST)

    ₹ 584.75 (+18% GST extra)

    1. SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
    2. USB Programming facilitated by the CH340
    3. Input voltage: USB 5V, from computer, power bank or standard USB adapter
    4. Piezo buzzer that will act as simple audio output
    5. 500mA (maximum) 3.3V voltage regulator
    6. 0-5V outputs with 3.3V compatible inputs
    7. 14 Digital I/O Pins (6 PWM outputs)
    8. 6 Analog Inputs
    9. ISP 6-pin Header
    Add to cart
  • D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

    SKU: 51888
     299.00

    (inc GST)

    ₹ 253.39 (+18% GST extra)

    1. Use BRT (Bias Resistor Transistor)
    2. Easier into flash mode.
    3.  30% increase in radiating area
    4. Good stability.
    Add to cart
  • Digispark ATTINY85 Mini USB Development Board

    SKU: 31117
     198.00

    (inc GST)

    ₹ 167.8 (+18% GST extra)

    1. High Performance, Low Power AVR® 8-Bit Microcontroller
    2. Non-volatile Program and Data Memories
    3. 512 Bytes In-System Programmable EEPROM
    4. 512 Bytes Internal SRAM
    5. USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
    6. 10-bit ADC
    7. 4 Single Ended Channels
    8. Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
    9. Low Power Consumption
    10. Active Mode:1 MHz, 1.8V: 300 µA
    Add to cart
  • ESP 8266 ESP8266 serial WIFI wireless transmitter module gain antenna MT76813DBI

    SKU: 52699
     120.00

    (inc GST)

    ₹ 101.69 (+18% GST extra)

    1. Radome material: polyurethane
    2. Flexible cable
    3. Stable signal
    4. Best for indoor applications.
    5. Connector: IPX female to SMA-KY
    6. Frequency(Hz): 900/1800
    7. Gain: <3 dB
    8. VSWR: <1.5
    Add to cart
  • ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

    SKU: 11482
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1. 802.11 b/g/n Standards
    2. Wi-Fi Direct (P2P), soft-AP
    3. 1MB Flash Memory
    4. Integrated low power 32-bit CPU could be used as an application processor
    5. A-MPDU & A-MSDU aggregation & 0.4ms guard interval
    6. Wake up and transmit packets in < 2ms
    7. Standby power consumption of < 1.0mW (DTIM3)
    Add to cart
  • ESP8266 NodeMCU CP2102 board

    SKU: 18821
     390.00

    (inc GST)

    ₹ 330.51 (+18% GST extra)

    1. Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
    2. Arduino-like hardware IO
    3. Integrated TR switch, balun, LNA, power amplifier and matching network
    4. Integrated PLL, regulators, DCXO and power management units
    5. Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
    6. Embeds logic level converter circuits
    7. Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
    8. Easy access to the GPIO pins for easy prototyping
    9. ESP-12E Processor
    10. Easy to use breadboard friendly form factor
    Add to cart
  • ESP8266 Serial Port To Wi-Fi Module, FL-M1S

    SKU: 61977
     209.00

    (inc GST)

    ₹ 177.12 (+18% GST extra)

    1. 802.11 b/g/n
    2. Wi-Fi Direct (P2P), soft-AP
    3. Integrated TCP/IP protocol stack
    4. Integrated TR switch, balun, LNA, power amplifier and matching network
    5. Integrated PLL, regulators, DCXO and power management units
    6. +19.5dBm output power in 802.11b mode
    7. Power down leakage current of <10uA
    8. Integrated low power 32-bit CPU could be used as application processor
    Add to cart
  • LilyPad 328 ATmega328P Main Board 16M compatible with Arduino

    SKU: 28446
     270.00

    (inc GST)

    ₹ 228.81 (+18% GST extra)

    1. Microcontroller: ATmega168 or ATmega328V
    2. Operating Voltage: 2.7-5.5 V
    3. Digital I/O Pins: 14
    4. PWM Channels: 6
    5. Analog Input Channels: 6
    6. DC Current per I/O Pin: 40 mA
    7. Board will run from 2V to 5V.
    8. The latest version of the LilyPad supports automatic reset for even easier programming.
    9. The back side of the LilyPad is now completely flat!
    Add to cart
  • Nodemcu Baseboard NodeMcu Lua WIFI Development Board ESP8266 Serial Port Baseboard

    SKU: 31313
     198.00

    (inc GST)

    ₹ 167.8 (+18% GST extra)

    1. The perfect solution for breaking out the pins from Lua V3 Nodemcu.
    2. Lead-out all the IO ports of the ESP-12E development board
    3. Lead out the pins of 5V and 3.3V power supply
    4. Convenient to connect with peripheral modules
    5. Onboard 5V / 1A DC-DC step-down converter circuit
    6. Onboard power indicator
    7. With DC power jack 6-24V.
    Add to cart
  • NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board

    SKU: 62160
     339.00

    (inc GST)

    ₹ 287.29 (+18% GST extra)

    1. Power input: 4.5V ~ 9V (10VMAX), USB-powered
    2. Transfer rate: 110-460800bps
    3. Support UART / GPIO data communication interface
    4. Support Smart Link Smart Networking
    5. Working temperature: -40°C ~ + 125°C
    6. Drive Type: Dual high-power H-bridge
    7. Don’t need to download resetting
    8. A great set of tools to develop ESP8266
    9. Flash size: 4MByte
    10. Lowest cost WI-FI
    Add to cart
  • Olimex Duinomite-Mini PIC32MX795 PIC 32Bit

    SKU: 11133
     2,913.00

    (inc GST)

    ₹ 2468.64 (+18% GST extra)

    1. PIC32MX795 microcontroller
    2. micro SD card
    3. USB connector
    4. VGA connector
    5. PS-2 keyboard connector
    6. Arduino like format i.e. can work with Arduino shields
    7. UEXT connector i.e. can work with all our modules
    Read more
  • Olimex OLIMEXINO-STM32 ARDUINO/MAPLE like Board with STM32F103RBT60

    SKU: 11181
     2,499.00

    (inc GST)

    ₹ 2117.8 (+18% GST extra)

    1. STM32F103RBT6 microcontroller
    2. UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
    3. Allows RTC – Real Time Clock.
    4. CAN with driver allows automotive applications
    5. micoSD-card for data logging
    6. NOISE IMMUNE design.
    7. A mini USB connector is used, which is common.
    8. 4 mount holes make board attachment easier.
    Read more
  • PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable

    SKU: 43286
     620.00

    (inc GST)

    ₹ 525.42 (+18% GST extra)

    1. Support the most popular programming PIC chips, read, encryption and other features!
    2. No external power supply, communication, and power is only a USB cable to print complete, without any cable.
    3. PICSTARTPLUS much faster rate than programming.
    4. Can easily read the contents of the chip program area.
    5. Automatic programming verification.
    6. Comprehensive information prompts, allowing users to understand the working state.
    Add to cart
  • PICkit3 PIC KIT3 Debugger Programmer Emulator Controller Development Board

    SKU: 28352
     1190

    (inc GST)

    ₹ 1008.47 (+18% GST extra)

    1. Full-speed USB support using Windows standard drivers
    2. Real-time execution
    3. Processors run at maximum speeds
    4. Built-in over-voltage/short circuit monitor
    5. Low voltage to 5V (1.8 to the 5V range)
    6. Read/write program and data memory of the microcontroller
    7. Program up to 512K byte flash.
    Add to cart
  • Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino

    SKU: 110787
     479.00

    (inc GST)

    ₹ 405.93 (+18% GST extra)

    1. ATMEGA32U4 running in 5V / 16MHz
    2. Support Arduino IDE V1.0.1
    3. Micro USB interface programming on the board
    4. Four 10-bit ADC pin
    5. 12 digital I / O (5 PWM capability)
    6. Rx and Tx hardware serial connection
    Add to cart
  • SmartElex ATmega32 Development Board on-board Programmer

    SKU: 80650
     749.00

    (inc GST)

    ₹ 634.75 (+18% GST extra)

    1. Onboard 5V regulator (78M05) circuit.
    2. On-Board power supply on-off switch
    3. Power Status LED (RED)
    4. User LED D0, D1 connected to any port pin through D0, D1 Jumper respectively.
    5. User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
    6. Onboard 12 MHz crystal
    7. Port extensions for all ports with detailed pin labeling for easy identification of pins
    8. Onboard USB TO Serial – CH340 Chip.
    9. On-board Micro USB USBASP for loading HEX file.
    10. Servo motor Connector (Run only up to 300mA).
    Add to cart
  • Uno Learning kit for Arduino

    SKU: 31821
     750.00

    (inc GST)

    ₹ 635.59 (+18% GST extra)

    1. All-in-one kit, a great starter kit for learning coding.
    2. Microcontroller ATmega328 (SMD) – Interface CH340G
    3. Operating Voltage: 5V
    4. Input Voltage (recommended): 7-12V
    5. Input Voltage (limits): 5-20V
    6. Digital I / O Pins 14 (of which 6 provide PWM output)
    7. Analog Input Pins: 6
    Add to cart
  • Uno R3 Beginners Kit for Arduino

    SKU: 31475
     1,990.00

    (inc GST)

    ₹ 1686.44 (+18% GST extra)

    1. Great for Starting with Arduino Programming
    2. Variety of components are included in this pack to try out different projects.
    3. The kit comes with quality components assured by Robu.in.
    4. All-in-one kit, a great starter kit for learning coding.
    5. Microcontroller ATmega328 (SMD) – Interface CH340G
    6. Operating Voltage: 5V
    7. Input Voltage (recommended): 7-12V
    8. Input Voltage (limits): 5-20V
    9. Digital I / O Pins 14 (of which 6 provide PWM output)
    10. Analog Input Pins: 6
    Add to cart
  • UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3

    SKU: 48065
     419.00

    (inc GST)

    1. A basic Arduino Kit including everything to get started.
    2. It includes a quality proven Arduino Cable.
    3. It includes a strong and sturdy Transparent Acrylic Case.
    4. Microcontroller ATmega328 (SMD) – Interface CH340G
    5. Operating Voltage: 5V
    6. Input Voltage (recommended): 7-12V
    7. Digital I / O Pins 14 (of which 6 provide PWM output)
    8. Analog Input Pins: 6
    Add to cart
  • Uno R3 CH340G ATmega328p Development Board Compatible with Arduino

    SKU: 44497
     299.00

    (inc GST)

    ₹ 253.39 (+18% GST extra)

    1. Microcontroller ATmega328 (SMD) – Interface CH340G
    2. Operating Voltage: 5V
    3. Input Voltage (recommended): 7-12V
    4. Input Voltage (limits): 5-20V
    5. Digital I / O Pins 14 (of which 6 provide PWM output)
    6. Analog Input Pins: 6
    Add to cart
  • Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3

    SKU: 48057
     525.00

    (inc GST)

    1. A basic Arduino Kit including everything to get started.
    2. It includes a quality proven Arduino Cable.
    3. It includes a strong and sturdy Transparent Acrylic Case.
    4. Micro-controller : ATmega328
    5. Operating Voltage: 5V
    6. Input Voltage (recommended) : 7-12V
    7. Digital I/O Pins: 14 (of which 6 provide PWM output)
    8. Analog Input Pins: 6
    Add to cart
  • Uno R3 Board without Cable compatible with Arduino

    SKU: 14140
     399

    (inc GST)

    ₹ 338.14 (+18% GST extra)

    1. Micro-controller : ATmega328.
    2. Operating Voltage : 5V.
    3. Input Voltage (recommended) : 7-12V.
    4. Digital I/O Pins : 14 (of which 6 provide PWM output).
    5. Analog Input Pins : 6.
    Add to cart
  • Uno R3 with Cable compatible with Arduino

    SKU: 6337
     425.00

    (inc GST)

    1. Micro-controller : ATmega328.
    2. Operating Voltage : 5V.
    3. Input Voltage (recommended) : 7-12V.
    4. Digital I/O Pins : 14 (of which 6 provide PWM output).
    5. Analog Input Pins : 6.
    Add to cart
  • Leonardo R3 Board Micro-USB compatible with Arduino

    SKU: 3348
     579.00

    (inc GST)

    ₹ 490.68 (+18% GST extra)

    1. Microcontroller: ATmega32u4
    2. Operating Voltage: 5V
    3. Input Voltage (Recommended): 7-12V
    4. Input Voltage (limits): 6-20V
    5. Digital I/O Pins: 20
    6. PWM Channels: 7
    7. Analog Input Channels: 12
    Add to cart
  • pcDuino3B – 1GHz Cortex Dual Core 1G RAM, Compatible With Arduino

    SKU: 3331
     5,999.00

    (inc GST)

    ₹ 5083.9 (+18% GST extra)

    1. 100% compatible with original Arduino Shields
    2. 100% compatible with Linux and Android
    3. Further support for:
    4. C, C ++ with GNU tool
    5. Java with standard Android SDK Python
    6. Arduino pin header, Arduino UNO Slots: 14x GPIO, 2x PW M, 6x ADC, 1x UART, 1xSPI, 1x I2C
    7. Ethernet 10M/100Mbps, WiFi, SATA
    Read more