ESP8266
-
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
₹ 449.00(inc GST)
₹ 380.51 (+18% GST extra)
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
-
WeMos D1 ESP Wroom 02 Board ESP8266 Mini WiFi Nodemcu Module 18650 Battery
₹ 950.00(inc GST)
₹ 805.08 (+18% GST extra)
- Operation and charging are possible at the same time.
- 18650 charging circuit including the 5V boosting circuit with TP5410.
- Overcharge protection, over-discharge protection built-in.
- One AD inputs.
- Micro USB inputs.
- The five buttons are controlled by FLATH, RSET, D5, D6, and D7 respectively.
-
USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip
₹ 149.00(inc GST)
₹ 126.27 (+18% GST extra)
- Driver Chip: CH340G
- Supports all basic windows versions.
- The adapter plate integrated 1000μF solid capacitors to ensure the current supply
- The power supply will not be a problem to make WIFI module crashes unresponsive.
- Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
- Working voltage: 4.5V – 5.5V (Onboard 3.3v LDO Regulator)
- Working current: 300mA (LDO regulator can supply)
-
UNO Based ESP8266 Nodemcu Development Board
₹ 425.00(inc GST)
₹ 360.17 (+18% GST extra)
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
-
NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board
₹ 339.00(inc GST)
₹ 287.29 (+18% GST extra)
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
-
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
₹ 198.00(inc GST)
₹ 167.8 (+18% GST extra)
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
-
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
₹ 471.00(inc GST)
₹ 399.15 (+18% GST extra)
- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
-
ESP8266 WiFi 5V 1 Channel Relay Module
₹ 690.00(inc GST)
₹ 584.75 (+18% GST extra)
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
-
ESP8266 Serial Port To Wi-Fi Module, FL-M1S
₹ 209.00(inc GST)
₹ 177.12 (+18% GST extra)
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
-
ESP8266 NodeMCU CP2102 Board
₹ 390.00(inc GST)
₹ 330.51 (+18% GST extra)
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
-
ESP8266 Adapter Plate Serial Wireless WIFI Module-1pcs
₹ 49.00(inc GST)
₹ 41.53 (+18% GST extra)
- It features reserved land-pattern for the 3.3V regulator
- It has Pinouts on the top layer in black colour.
- Compatible with Latest ESP-12F ESP8266 Wifi Module
- It includes a 10K pull-up resistor populated on PCB.
-
ESP8266 10A DC 7-30V Network Relay WIFI Module
₹ 499.00(inc GST)
₹ 422.88 (+18% GST extra)
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
-
ESP-12F ESP8266 Wifi Wireless IoT Board Module
₹ 249.00₹ 129.00(inc GST)
₹ 109.32 (+18% GST extra)
You save(48.2%): ₹ 120.00
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
-
DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266
₹ 260.00(inc GST)
₹ 220.34 (+18% GST extra)
- Derived from ESP8266, ESP8285 has a flash memory of 1MB
- Operating Voltage: 3.3V
- Totally compatible with ESP8266
- WiFi support 802.11 b/g/n/e/i
- High temperature resistant, working temperature: -40℃-125℃
-
Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno
₹ 999.00(inc GST)
₹ 846.61 (+18% GST extra)
- Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
- Separate 3.3V voltage regulator for ESP8266-12 WROOM-02 module, 500mA max output.
- Each and every board is preassembled and tested before it is being shipped out to you.
- 802.11 b/g/n.
- Support Wi-Fi Direct (P2P), soft-AP.
- Integrated TCP/IP protocol stack.