LCD Display
-
LC100A 2.5″ LCD Digital High Precision Inductance/Capacitance (L/C) Meter
₹ 1,699.00(inc GST)
₹ 1439.83 (+18% GST extra)
- Supply voltage: 5V.
- Interface to the power supply: Mini USB or Φ5.5 DC Socket.
- Display: 1602 LCD.
- Effective display digits: 4 digits.
- LC Resonance measurement method of capacitance, Inductance and Large Inductance.
- Charge-discharge method of measurement of large capacitance.
-
GM320 Non Contact Infrared (IR) Temperature Gun
₹ 949.00(inc GST)
₹ 804.24 (+18% GST extra)
- Temperature range: -50 to 330°C
- Accuracy: ±1.5% or ±1.5°C
- Resolution: 0.1°C or 0.1°F
- Repeatability: 1% of reading or 1°C
- Response time: 500mSec, 95% response
- Precise non-contact IR thermometer, safe and easy to use.
- Simply point to an object and read its temperature.
- Laser sight allows accurate targeting.
-
Cytron LCD keypad Shield High Quality
₹ 619.00(inc GST)
₹ 524.58 (+18% GST extra)
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
-
3D printer 128×64 Smart LCD controller for ramps 1.4
₹ 829.00(inc GST)
₹ 702.54 (+18% GST extra)
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
-
2004 LCD Display RepRapDiscount Smart Controller with Adapter
₹ 749.00(inc GST)
₹ 634.75 (+18% GST extra)
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
-
1602 LCD Board Keypad Shield Blue Backlight
₹ 225.00(inc GST)
₹ 190.68 (+18% GST extra)
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
-
12864B V 2.0 Graphic Blue Color Backlight LCD Display Module
₹ 590.00(inc GST)
₹ 500 (+18% GST extra)
- Based on ST7920
- 128 X 64 pixels
- Operating voltage: 5V
- Led Backlight
- Module size: 93mm x 70mm x 12mm
- Viewing Area: 72mm x 40mm
- Display mode TN/STN
- Display type Positive Transflective
- Backlight VDD5.0V, Idd250mA
- Operating temperature Indoor
- Driving voltage Single power
- Driving method 1/64 duty,1/9 bias, VOP10.5V, VDD5.0V
- Type COB (Chip On Board)
- Number of data line 8-bit parallel
- Connector Pin / ZEBRA
-
10.1 inch IPS LCD Screen 1280×800 with Driver Board Kit for Raspberry Pi
₹ 7,999.00₹ 6,999.00(inc GST)
₹ 5931.36 (+18% GST extra)
You save(12.5%): ₹ 1,000.00
- Operating voltage: 12V
- Current requirement: 1A-2A
- Rated power: 6-7W
- Signal input: 2 Road AV+VGA
- System mode: PAL/NTSC
- HDMI input: version HDMI 1.1
- VGA input: 1280×800 physical resolution
- Physical resolution: 1280 x 800
- Brightness: 350 lumens
- Panel type: TFT
- Interface type: Digital
- Number of wiring: 40 PIN LVDS
- Backlight: LED