Multirotors
Showing 1–48 of 113 results
-
Flight Controller & Accessories
KAKUTE F4 FLIGHT CONTROLLER
SKU: 1104558- MCU: STM32F405RGT6Â 32-bit processor
- IMU: ICM20689 (SPI)
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 3 hardware UARTS (UART1,3,6)
- 128 Mbit Dataflash chip for Blackbox logging
- 5v Power Out: 1.5 A max
- 3.3v Power Out: 200 mA max
SKU: 1104558 -
Drone Frame and Accessories
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
SKU: 28954- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Board Dimensions : 50 x 50 x 2 mm.
- Weight:Â 8 gm.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
SKU: 28954 -
-
-
-
-
Drone Accessories
5V/6V 3A Switch-Mode Ultimate BEC – Voltage Regulator
SKU: 22179- Shows the working status with an indicator (LED), lights when the output is in the normal range
- Output Voltage: 5V or 6V (Changeable with an output-voltage select switch)
- Continuous output current: 3 Amps
- Input: 5.5V-23V (2-6 cells lithium Poly.battery pack or 5-15 cells NiMH / NiCd battery)
SKU: 22179 -
Sound Sensor
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
Sound Sensor6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
SKU: 45833- Supply Voltage: 6-12VDC
- Frequency Range: 100-5500 Hz
- Output: 2.5Vpp/-25db
- Low noise
- High fidelity
- Wide working voltage range
- Low power consumption
- Long transmission distance
SKU: 45833 -
-
-
-
-
Drone Accessories
75cm Diameter Fast-fold Landing Pad/ Helipad for RC Drone
SKU: 127289- Â High-quality Nylon Waterproof Material
- High precision printing
- Waterproof, Sun-protection, Not easy color fading
- Double side double color design
- Highlight the location of the Helipad with an illuminance
- Specialty Carrying bag
SKU: 127289 -
Drone Accessories
A set of 4 Motor Cap Guard for DJI Spark Drone Motor
SKU: 127278These DJI Spark skins offer an ultra-slim fit that protects your device against bumps, scratches, small drops, dust, and dirt. Better yet, it won’t take up space in your bag or your purse and ensures your DJI Spark looks truly original.
SKU: 127278 -
-
Drone Accessories
Alarm Finder Tracer Buzzer for RC Lost Aircraft
SKU: 29376- Operating Voltage : 4 – 6 V.
- Current Drain : 1 – 35 mA.
- Weight : 4.5 gm.
- Let you know where your RC aircraft is when you lose connection with it
- Particularly useful when the multirotor is out of control
- Easy to install, simply connect the alarm between the servo and the receiver
SKU: 29376 -
Drone Gimbal Accessories
BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver
SKU: 45627- Stabilization Axes: 2
- Supply Voltage: 8V to 18V (3s-4s LiPo)
- Maximum DC current to each motor 2.8A
- Supported sensors: MPU6050
- Overcurrent protection: Yes
- Overheat protection: Yes
- Undervoltage protection: Yes
- Reverse polarity protection: Yes
- Support 2-8 series gimbal motor
- Peak current 10A
SKU: 45627 -
Drone Accessories
DC-DC Converter Step down Module 3A 5V Mini UBEC for RC Plane
SKU: 119345- Suitable for: RC AirPlane Multirotor helicopter
- Input voltage: 2-6S
- Output Current: constant 3A
- Output Voltage: 5V
- The UBEC is ideal to provide FPV cameras and brushless gimbals with a constant 5V voltage.
- Special for FPV image transmission
SKU: 119345 -
FPV Antennas and Trans-Receivers
DIYÂ RX5808Â 5.8G 40CH diversity FPV receiver with OLED display for FPV racer Quad
FPV Antennas and Trans-ReceiversDIYÂ RX5808Â 5.8G 40CH diversity FPV receiver with OLED display for FPV racer Quad
SKU: 29729- Auto Search Signal
- Auto seamless switching signal between 2 receivers
- Suitable for High-Speed Racing Quad
- Suitable for HD Aerial Photography
- Suggest using a clover antenna and a panel connector for long and short distance.
SKU: 29729 -
-
-
-
-
-
