Categories

RAMPS

  • 12864B V 2.0 Graphic Blue Color Backlight LCD Display Module

    SKU: 43376
     590.00

    (inc GST)

    ₹ 500 (+18% GST extra)

    1. Based on ST7920
    2. 128 X 64 pixels
    3. Operating voltage: 5V
    4. Led Backlight
    5. Module size: 93mm x 70mm x 12mm
    6. Viewing Area: 72mm x 40mm
    7. Display mode TN/STN
    8. Display type Positive Transflective
    9. Backlight VDD5.0V, Idd250mA
    10. Operating temperature Indoor
    11. Driving voltage Single power
    12. Driving method 1/64 duty,1/9 bias, VOP10.5V, VDD5.0V
    13. Type COB (Chip On Board)
    14. Number of data line 8-bit parallel
    15. Connector Pin / ZEBRA
    Browse Wishlist
    Add to cart
  • 2004 LCD Display RepRapDiscount Smart Controller with Adapter

    SKU: 12060
     749.00

    (inc GST)

    ₹ 634.75 (+18% GST extra)

    1. RAMPS 1.4 2004 LCD Display intelligent controller.
    2. LED background light control circuit, a small function of the intelligent controller,
    3. With pin short time to decide on all LED turn or steering 30 seconds
    4. You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
    5. Plug and play on the RAMPS, but need to modify the firmware to support.
    6. The product comes encoder parameter adjustment can be achieved, and the file selection print.
    7. With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
    Read more
  • 3D printer 128×64 Smart LCD controller for ramps 1.4

    SKU: 12072
     829.00

    (inc GST)

    ₹ 702.54 (+18% GST extra)

    1. RAMPS 1.4 LCD 12864 intelligent controller.
    2. With an SD card base on back.
    3. Large screen display 128×64 LCD (3.2″)
    4. SD card slot at the back, able to directly select a file and print
    5. The product comes encoder parameter adjustment can be achieved, and the file selection print
    6. Plug & play on the RAMPS, but need to modify the firmware to support.
    7. LCD 12864 Smart Controller fully supported by Marlin Firmware.
    Add to cart
  • 3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model

    SKU: 16048
     588.00

    (inc GST)

    ₹ 498.31 (+18% GST extra)

    1. Supply Voltage: 12V
    2. Standard interfaces (as that of the extruder)
    3. Reserved GCI like I2C and RS232
    4. 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
    5. Another 5A added to protect the component parts.
    6. An 11A fuse is added to the hotbed.
    7. Support 5 stepper drive board
    Add to cart
  • Micro SD card adapter for RAMPS

    SKU: 51912
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    1. SPI mode.
    2. Supply voltage: 4.5 – 5.5V.
    3. Up to 50 MB / sec data transfer rate.
    4. Located directly on a RAMPS.
    5. Also, be used with other microcontrollers.
    6. Dimensions: 27 x 17 x 11 mm(LxWxH).
    7. Weight: 5 gm.
    Add to cart