Robot Brain
Showing all 14 results
-
Kits compatible with Arduino
Advanced Kit for Arduino
SKU: 31816- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: 31816 -
Kits compatible with Arduino
Arduino Uno R3 Beginners Kit
SKU: 31475- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by Robu.in.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: 31475 -
Raspberry Pi Accessories
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
-9%
Raspberry Pi AccessoriesBPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
SKU: 51659- ATmega328 chip on the module
- Compatible with for Arduino Uno
- Switch 5V or 3.3V GPIO
- Compatible with Processing code
- Expand SPI of Banana Pi
- Working voltage: 3.3V-4.5V
- GPIO voltage: 3.3V or 5.5
- 8 channel 10bit high-resolution ADC
SKU: 51659 -
Boards Compatible with Arduino
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
SKU: 56432- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
SKU: 56432 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
SKU: 31249- Microcontroller: ATmega328
- Circuit Operating Voltage: 3.3V
- Clock frequency: 8MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 31249 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M (Official Version)
SKU: 11458- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 11458 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
SKU: 409791- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
SKU: 409791 -
AVR Development Board
SmartElex ATmega32 Development Board on-board Programmer
SKU: 80650- Onboard 5V regulator (78M05) circuit.
- On-Board power supply on-off switch
- Power Status LED (RED)
- User LED D0, D1 connected to any port pin through D0, D1 Jumper respectively.
- User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
- Onboard 12 MHz crystal
- Port extensions for all ports with detailed pin labeling for easy identification of pins
- Onboard USB TO Serial – CH340 Chip.
- On-board Micro USB USBASP for loading HEX file.
- Servo motor Connector (Run only up to 300mA).
SKU: 80650 -
Kits compatible with Arduino
Uno Learning kit for Arduino
SKU: 31821- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 31821 -
Boards Compatible with Arduino
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
Boards Compatible with ArduinoUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
SKU: 48065- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 48065 -
Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
-25%
Boards Compatible with ArduinoUno R3 CH340G ATmega328p Development Board Compatible with Arduino
SKU: 44497- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 44497 -
Boards Compatible with Arduino
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
Boards Compatible with ArduinoUno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
SKU: 48057- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 48057 -
