Solid State Relay
SSR-40DA Solid State Relay Module 3-32VDC/24-380VAC 40A
SKU: 43625₹ 449.00(inc GST)
₹ 380.51 (+18% GST extra)
- Long Service life and high Reliability
- Reduced Electromagnetic Interference
- Highly reliable, compact size designed to offer users maximum simplicity
- Trigger Voltage: 3-32VDC
- Switching Voltage: 24-380VAC@40A
DC To AC SSR-100DA Solid State Relay Module 3-32VDC/24-380VAC 100A
SKU: 43220₹ 689.00(inc GST)
₹ 583.9 (+18% GST extra)
- Long service life and high reliability
- Reduced electromagnetic interference
- Highly reliable, compact size designed to offer users maximum simplicity
- Input voltage: 3-32V DC
- Output voltage: 24-380V AC
- Output current: 100A
8 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM
SKU: 9728₹ 449.00(inc GST)
₹ 380.51 (+18% GST extra)
- Channel: 8 channel
- Relay Operating Voltage: 5V
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
SKU: 43107₹ 990.00(inc GST)
₹ 838.98 (+18% GST extra)
- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
- Good for lighting, Holiday displays etc.
- With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
- Power supply: 5 V DC(160 mA)
- Trigger Current: 2mA
- Trigger Voltage: 3.3V-5V
5V 4 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse – Good Quality
SKU: 28504₹ 690.00(inc GST)
₹ 584.75 (+18% GST extra)
- Has been assembled, and electrical test passed.
- Led indicator for each relay.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)
SKU: 28508₹ 990.00(inc GST)
₹ 838.98 (+18% GST extra)
- 8 channel 2 AMP Solid State Relay board
- Control 8 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: 28500₹ 290.00(inc GST)
₹ 245.76 (+18% GST extra)
- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Input control signal voltage:
- 0-0.5V the state of low-level relay ON
- 0.5-3.3V Unknown State
- 3.3-5V high-level relay OFF
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
5V 16 Channel Relay Module with Light Coupling LM2576 Power Supply
SKU: 400914₹ 699.00(inc GST)
₹ 592.37 (+18% GST extra)
- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: 28487₹ 236.00(inc GST)
₹ 200 (+18% GST extra)
- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
12V 16 Channel Relay Module with Light Coupling LM2576 Power Supply
SKU: 28443₹ 749.00(inc GST)
₹ 634.75 (+18% GST extra)
- 12V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
1 channel 5V 10A Relay Control Board Module with Optocoupler
SKU: 25289₹ 89.00(inc GST)
₹ 75.42 (+18% GST extra)
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
