Waveshare 2.13inch E-Ink Paper display HAT for Raspberry Pi, Three-Color

Availability:

Out of stock

Approx Restocking Date: 29th March, 2024
SKU: 223582
  1. Display Resolution: 212 x 104
  2. Display Color: Red, Black and White
  3. No backlight keeps displaying last content for a long time even when power is down
  4. Ultra low power consumption, basically power is only required for refreshing
  5. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+

 1,990.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: WAVESHARE
Category: e-Ink Paper Display
Tags: e-paper display HAT, Display HAT for Raspberry pi

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212×104 resolution, with an embedded controller, communicating via SPI interface, supports the red, black, and white three-colour display.

There is no backlight so it can keep displaying last content for a long time even when the power is down. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight,  Basically power to the display is only required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.. SPI interface can be used.


Features:

  1. No backlight keeps displaying last content for a long time even when power is down
  2. Ultra low power consumption, basically power is only required for refreshing
  3. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  4. Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  5. Onboard voltage translator, compatible with 3.3V/5V MCUs
  6. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Interface:

SYMBOL DESCRIPTION
VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active

Useful Links:

Wiki : www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)


Package Includes:

1 x Waveshare 2.13inch E-Ink Paper display HAT for Raspberry Pi, Three-Color

1 x Interfacing Cable

1 x Nut-Bolt and Spacer set

Note: No Raspberry Pi is included in Package 

Operating Voltage (VDC)

3.3

Display Size (inch)

2.13

Outline dimension (mm)

65 × 30.2

Dot Pitch

0.229 × 0.228

Grey level

2

Display Color

Red, Black and White

Display Resolution

212 × 104

Viewing Angle

>170°

Interface

3-wire SPI, 4-wire SPI

Full Refresh Time (s)

15

Refresh Power

26.4mW(typ.)

Standby Power (mW)

<0.017

Dimensions in mm (LxWxH)

65 x 31 x 8

Weight (g):

20

Shipping Weight 0.022 kg
Shipping Dimensions 9 × 7 × 4 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Waveshare 2.13inch E-Ink Paper display HAT for Raspberry Pi, Three-Color”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China