250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module

(3 customer reviews)
Availability:

In stock


SKU: 405563
  1. DIY a stabilized power supply, input 12V is ok, the output can be adjustable in the range of 12~50V.
  2. Offer power for your electronic equipment, you can set the output voltage value according to your system voltage.
  3. As the car power supply offer power for your laptop, PDA or a variety of digital products.
  4. A high-power notebook mobile power DIY: coupled with a large-capacity 12V lithium battery pack
  5. Solar panel voltage regulator.
  6. Charge for the storage battery, lithium battery etc.
  7.  Drive high-power LED lights.

 314.00

(Including GST)

In stock

Purchase this product now and earn 4 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Generic
Category: RGB LED Strips and Drivers

The 250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module can be used to get adjustable output voltage ranges from 10V to 50V. The module provides a wide range of current output up to 6 A. Aluminium substrate itself  work as a heat sink which manages to run the module at high power application continuously

The Module is made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 70°C constant current 1A, temperature drift less than 1%). and therefore it is particularly most suitable for LED driver applications.

The output current of the module can be raised up to 10A(for continuous use it is recommended up to 6A.  MOS Schottky diode independent heat sink, which heat dissipation is good, and won’t affect each other. Also using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever.

The module has onboard 3296 multiturn potentiometers for high accuracy voltage and current regulation to provide good stability. As voltage and current are adjustable, it gives very easy to use at multiple Application such as battery charging, LED Driver power supply; Vehicle Power Supply, etc which makes the module Multipurpose and hence this module is always in demand from our maker because of its wide range of application and low cost.

Note : Actual product may vary in terms of design.


Specifications and Features:

  1. Module properties: non-isolated boost module (BOOST).
  2. Static operating current: 10mA (when 12V step up to 20V, the higher the output voltage, the static current will increase).
  3. Output voltage: DC 10~50V, can be continuously adjustable (default output is 19V).
  4. Output current: 6A MAX, when exceeds 4A, please strengthen the heat dissipation (related to input and output pressure difference, the larger the pressure difference is, the smaller the output current is).
  5. Constant current range: 0.2 ~ 6A.
  6. Output power: = Input voltage * 6A, for example: input 12V * 6A = 72W, input 24V * 6A = 144W, input 36V*5A=180W, input 48V*5A=240W.
  7. Conversion efficiency: 92%~96% (efficiency is related to input, output voltage, current, and differential pressure).
  8. Input reverse connection protection: Yes (less than 5A).
  9. Mounting method: 4* 3mm screw holes.
  10. Connection mode: Wiring output.

The output voltage / current regulation method:
  1. Adjust RV1 potentiometer, according to your battery or LED, set the output voltage to the voltage you need. For example, for 10 series LED voltage, regulate the voltage to 37V.
  2. Turn the RV2 potentiometer clockwise about 30 turns, set the output current to the minimum, connect the LED, and adjust the RV2 potentiometer to the current you need. For battery charging, after the battery is fully discharged, connect it to the output and adjust the RV2 to the current you need. (For charging, please make sure the battery is fully discharged, then adjust the voltage value will be accurate, for the more battery left capacity, the smaller the charging current is.)
  • Note: Do not use a short circuit method to adjust the current, the circuit structure of the boost module cannot be adjusted in a short circuit way.
Instructions for use:
  1. VIN+ is the input voltage positive side, VIN- is the input voltage negative side.
  2. OUT+ is the output voltage positive side, OUT- is the output voltage negative side.
  3. Adjustable constant voltage range: DC 10~50V (clockwise regulation to decrease, counterclockwise regulation to increase)
  4. Adjustable constant current range: 0.2A~6A (clockwise regulation to decrease, counterclockwise regulation to increase)
  5. When the input current exceeds 2A, it is necessary to enhance heat dissipation (the aluminum substrate is attached to the flat metal part)
  6. The input voltage cannot be lower than 10V or more than 40V,
  7. The maximum input current cannot exceed 6A, the power cannot exceed 250W.
  8. Must ensure that the input voltage is lower than the output voltage at least 2V.
  9. Before connecting the load, please adjust the required voltage and current at no-load (no-load voltage should be increased by 3~5V at constant current mode).
  10. When using a switching power supply or other secondary power supply, please ensure that the power supply power should be double more than the power of the module.
Precautions:
  1. The input and output cannot be reversed connection.
  2. The input and output voltage, the current must not exceed the maximum value during work to avoid damage to the boost converter module.
  3. When working with full load for a long time, pay attention to ventilation and heat dissipation to extend the life of the boost converter module.
Application Range:
  1. DIY a stabilized power supply, input 12V is ok, the output can be adjustable in the range of 12~50V.
  2. Offer power for your electronic equipment, you can set the output voltage value according to your system voltage.
  3. As the car power supply offers power for your laptop, PDA or a variety of digital products.
  4. A high-power notebook mobile power DIY: coupled with a large-capacity 12V lithium battery pack.
  5. Solar panel voltage regulator.
  6. Charge for the storage battery, lithium battery, etc.
  7.  Drive high-power LED lights.

Package Includes:

1 x 250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module.

SKU: 405563 Category:
Static operating current (mA)

10

Output voltage (V)

DC 10 ~ 50

Constant current range (A)

0.2 ~ 6

Operating Temperature (°C)

-40 ~+85

Working Frequency (KHz)

150

Conversion efficiency

92% ~ 96%

Length (mm):

70

Width (mm):

36

Height (mm):

18

Weight (g):

50

Shipping Weight 0.055 kg
Shipping Dimensions 7 × 6 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 3 reviews

5.0 overall
3
0
0
0
0

Add a review

  1. tejvir5bhambra (verified owner)

    Very good product. At first before buying i have concern about efficiency of the product usually stepup driver have low efficiency but i used to stepup 13.5 volt at 3.43 amps to 21.77 volt at 2 amp output it provides 94% efficiency thats really really great… i wasn’t excepting that. I used it to run 7 cree xpg3 led in series 3 volt chip at 2 amp.

    tejvir5bhambra

  2. drsrikanthb (verified owner)

    Works well. Am using 4 of them, one each (using a input voltage of 12V), to provide 45V at 350 mA constant current for 4 lamps with 12 power LEDs each. So input power is 45 x 0.35 / 12 which is 1.3A (which is < 2A). So did not need additional heat sinking

    drsrikanthb

  3. Rajesh Yadav (verified owner)

    Working fine. I am using it for 85W and 65 degree Celsius. Its performance is very good

    Rajesh Yadav

Questions and answers of the customers

  1. 0 votes
    A

    Hello, for your query kindly mail us at https:/... Read more

  2. 0 votes
    A

    With an input of 15V and 6A, you would get appr... Read more

  3. 0 votes
    Q I need datasheet for the given component.
    Asked by mdevanjan on May 23, 2020 12:53 pm
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China