5V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module

Availability:

In stock


SKU: 1187473
  1. Output Capacity: DC 5V AC 220V 10A
  2. Static Current: 20mA
  3. Working Current: 50mA
  4. Working Voltage: 12V(fluctuate between 10V~16V won’t be affected)
  5. Trigger Signal: high-level voltage 4V~20V

 360.00

(Including GST)

In stock

Purchase this product now and earn 4 Robu Points!

Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Brand: Generic
Category: Relay Modules

This is a cycle delay timer module with an LED display. The module adopts MCU as the main chip, so it has high-timer precision and reliable performance. Its working voltage is DC 5V and its working current is 50mA. You can use it to control the reciprocating stroke, or repetitive power on and off for equipment and products burn-in tests. Moreover, it can be widely used in timer operating equipment, repetitive testing circuits, and fish tank intermittent pumps.

Note: Product Image may vary in terms of Relay brand and rating printed.

Function:

  1. Signal trigger relay suction, time is up relay disconnection, in the delay period.
  2. A: Invalid trigger again, B: Trigger the recount again, C: Re-trigger relay reset termination timing
  3. The start time of signal triggering is T1. When the time is up, the time of switching off (reset) the T1 and T2 relay is adjustable.
  4. Recycling: Turn on T1, disconnect T2, infinite cycle. The time of T1 and T2 is adjustable.
  5. Signal, relay suction, keep suction, signal disappearance, start timing, time is up, relay disconnection, in the delay period, give the signal again, delay cancellation, signal disappearance, recount.

Time Setting:

The K1 cycle includes 6 steps. Steps 1,2,3 are set to “ON” time, and steps 4,5,6 are setting “OFF” time.

  1. Press K1, the first digit flashes, and press K2 to change the number
  2. Press K1, and the second digit flashes, press K2 to change the number
  3. Press K1, the third digit flashes, and press K2 to change the number
  4. Press K1, the first digit flashes, and press K2 to change the number
  5. Press K1, and the second digit flashes, press K2 to change the number
  6. Press K1, the third digit flashes, and press K2 to change the number
  7. Press K1 till the display stops flashing, then press K2 to change the decimal point in order to select the time range. The third decimal point indicates 0 to 999 minutes, and the second decimal point indicates 0 to 99.9 seconds. No decimal point indicates 0 to 999 seconds.
  8. Long-pressing K2 can turn on/off the display.

Features:

  1. 0.1 seconds (min.) to 999 minutes (max.) continuously adjustable.
  2. Adopt MCU as the main chip, high-timer precision, and reliable performance.
  3. Cycle mode: Connect for a period of time, and disconnect for a period of time, infinite loop.
  4. A wide time range to meet your general needs, both “on” time and “off” time are adjustable.
  5. Can be used to control the reciprocating stroke or repetitive power on and off for equipment and product burn-in tests.
  6. Suitable for timer operating equipment, repetitive testing circuit, and fish tank intermittent pump.

Package Included:

1 x 5V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module

SKU: 1187473 Category:
Working Current(mA)

50mA

Working Voltage

12V(fluctuate between 10V~16V won't be affected)

Trigger Signal

high-level voltage 4V~20V

Output Capacity

DC 5V AC 220V 10A

Static Current

20mA

Shipping Weight 0.03 kg
Shipping Dimensions 7 × 6 × 3 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “5V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module”

There are no reviews yet.

Questions and answers of the customers

  1. 0 votes
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China