7.5-inch E-Ink Paper display HAT for Raspberry Pi

Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 223595
  1. Display Resolution: 640×384
  2. No backlight keeps displaying last content for a long time even when power is down
  3. Ultra low power consumption, basically power is only required for refreshing
  4. Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
  5. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  6. Onboard voltage translator, compatible with 3.3V/5V MCUs

 6,399.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: WAVESHARE
Category: e-Ink Paper Display

This is an E-Ink display HAT for Raspberry Pi, 7.5-inch, 640×384 resolution, with an embedded controller, communicating via SPI interface. This display shows the data on the screen as same as it seen on printed paper.

There is no backlight so it can keep displaying last content for a long time even when the power is down. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen,

The Display it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight,  Basically power to the display is only required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.. SPI interface can be used.


Features:

  1. No backlight keeps displaying last content for a long time even when power is down
  2. Ultra low power consumption, basically power is only required for refreshing
  3. Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
  4. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  5. Onboard voltage translator, compatible with 3.3V/5V MCUs
  6. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Interface:

SYMBOL DESCRIPTION
VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active

 


Useful Link: 

Wiki: www.waveshare.com/wiki/7.5inch_e-Paper_HAT


Package Includes:

1 x 7.5-inch E-Ink Paper display HAT for Raspberry Pi

1 x e-paper Hat for Raspberry Pi to e-paper Adapter

1 x Interfacing Cable

1 x Nut-Bolt and Spacers set

Note: No Raspberry Pi is included in Package 

SKU: 223595 Category:
Operating Voltage (VDC)

3.3 ~ 5

Display Size (inch)

2.13

Outline dimension (mm)

170.2 × 111.2

Dot Pitch

0.255 × 0.255

Grey level

2

Display Color

Black and White

Display Resolution

640×384

Viewing Angle

>170°

Interface

3-wire SPI, 4-wire SPI

Full Refresh Time (s)

6

Refresh Power

38mW(typ.)

Standby Power (mW)

<0.017

Dimensions in mm (LxWxH)

171 x 111 x 2

Weight (g):

68

Shipping Weight 0.1 kg
Shipping Dimensions 20 × 12 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “7.5-inch E-Ink Paper display HAT for Raspberry Pi”

There are no reviews yet.

User Manual

Datasheet

Schematic

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions