This is AC Digital Clamp Meter T-RMS 6000 Counts. This Digital Clamp meter multimeter can measure AC current, test AC and DC voltage, Low impedance, serve as continuity, resistance, and capacitance tester. It can also measure temperature, frequency, and duty cycle.
Characteristics of AC Digital Clamp Meter T-RMS 6000 Counts:
- No Contact Voltage Detector: Without touching any wires the instrument can check electrical status, and detect whether the conductor being measured carries a voltage higher than 90 V AC.
- Various Features: This clamp meter includes various features such as LCD display, low battery detector, overload protection, auto power-off after 15 minutes, and many more.
- Bonus Items: This digital clamp meter also comes with normal and needle types of probes, test clips, dupont wire probes, crocodile clips, mini crocodile cable, thermocouples, mini wire stripper tool, mini screwdrivers, an electrical tape, and a manual.
Features:
- AC Current Measurement: This clamp meter can measure AC current. It can measure AC current from 0.1A to 600A.
- AC/DC Voltage Measurement: This clamp meter can measure both AC and DC voltages. It can measure DC voltage from 0.001V to 600V. It can measure AC voltage from 0.01V to 600V
- Resistance Measurement: This clamp meter can measure resistance with voltage overload protection up to 250 V AC or DC.
- Temperature Measurement: This clamp meter can measure temperatures at the following ranges: -200 ~ 1300°C 1°C ± (1% reading + 2°C) and -328 ~ 2372°F 2°F ± (1% reading + 4°F).
- Low Battery Indicator: If the low battery indicator appears on the LCD, then the batteries need to be changed.
- Hold Function / Backlight and Flashlight: Can hold the current reading on the instrument’s display.
- Auto Power Off: After being idle for more than 15 minutes, the instrument will enter automatically in standby mode in order to save power.
- Non-Contact Voltage Detection: When the instrument detects AC voltage the buzzer gets activated and the NCV alarm light will flash.
Note: flashlight only works during current measurement – set the knob to current function, then press the backlight button for longer than 2 seconds in order to turn on the LCD backlight and the flashlight.
Package Includes:
1 x AC Digital Clamp Meter T-RMS 6000 Counts
There are no reviews yet.